RFID Cards

EM4100 cards are contactless RFID cards operating in LF at 125 kHz. They have read-only memory and a unique identifier (UID).

EM4100 read-only cards are widely used for access control and identification at hotels and hospitality facilities, companies, schools and universities.

Available in different materials — PVC, PETG, wood — they come in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

EM4102 cards operate at a low frequency, 125 kHz. These are contactless RFID cards equipped with a read-only memory, and unique identifier (UID).

EM4102 read-only cards are among the most widely used for personal identification and access control in the hospitality sector, at companies, schools and universities, and for attendance at companies.

They are available in PVC, PETG and wood, with the following dimensions: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

EM4200 cards are contactless RFID cards operating at a low frequency of 125 kHz. They have read-only memory and a unique identifier (UID).

EM4200 read-only badges offer high performance in several applications, such as access control and identification at hotels and campsites; waste management (opening of access-controlled bins using RFID cards); loyalty programmes; and as electronic wallets for payments at laundromats, vending machines and self-service car washes. 

EM4200 cards are available in three different materials (PVC, PETG and wood), in the following dimensions: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

EM4550 cards, or TITAN cards, are contactless RFID cards operating in LF at 125 kHz. Equipped with read/write data transmission modes, they contain 1 kilobit of EEPROM memory, which can be password protected, and a UID (unique identifier). 

They are used for various applications such as ticketing, identification and access control at hospitality facilities and companies, loyalty programmes and as virtual wallets for self-service machines (car washes, vending machines, laundromats).

EM4550 cards are available in PVC, PETG and wood, in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

EM4305 cards are contactless RFID cards operating in the low-frequency band at 125 kHz. They transmit data in read/write mode, have a 64-byte memory and a unique identifier (UID). The memory is password-protected in read/write operations.

EM4305 cards are used for access control and identification in the hospitality industry, corporate and educational settings, and also in the waste-management sector for opening access-controlled bins using RFID cards.

They are available in three different materials (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

ATA5577 cards, or T5567 cards, are contactless RFID cards operating in low frequency, 125 kHz. The data transmission mode of these cards is read/write.

ATA5577 or T5567 cards have a password-protected memory of 36 bytes and a unique identifier (UID). Furthermore, when programmed, the card memory becomes read-only.

They are used for access control and identification at hotels and hospitality facilities, companies, schools and universities; attendance control at companies; and in waste management for opening access-controlled bins using RFID cards.

ATA5577 or T5567 cards are available in three different materials (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood. 

Q5 cards or 5555 cards are LF-band contactless RFID cards operating at 125 kHz. The data transmission mode is read/write.  They have a 33-byte memory and UID (unique identifier). In particular, the memory can be programmed to be read-only. The mode of operation is by password or direct access. Applications of the Q5 or 5555 cards include access control and identification at hotels, campsites and hospitality facilities, companies, schools and universities, as well as attendance control at companies. Q5 or 5555 cards are available in three types of material (PVC, PETG and wood), measuring 86 mm x 54 mm x 0.86 mm (PVC and PETG) and 86 mm x 54 mm x 1.3 mm (wood).

Hitag1 cards are low-frequency contactless RFID cards operating at 125 kHz. They transmit data in read/write mode and have a memory of 2 kbits, or 256 bytes. 

The memory is equipped with a selective content protection feature. In addition, a smart anti-collision algorithm allows several cards to be used simultaneously in the same magnetic field.

Hitag1 cards are used for various applications, such as access control, virtual wallets for self-service and vending machines and attendance control. 

They are available in three materials (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

Hitag2 cards are contactless cards operating at a low frequency, 125 kHz. The data transmission mode is read/write.

These RFID cards have a memory of 32 bytes. Moreover, the memory has a selective content protection feature.

Hitag2 badges are suitable for multiple applications, such as identifying people and access control at hospitality facilities, offices, universities and schools; as electronic wallets for self-service and vending machines; and attendance control at companies. 

They are available in three different materials (PVC, PETG and wood), in the following dimensions: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

HitagS cards are contactless RFID cards operating in the LF band at 125 kHz. They have a read/write data transmission mode. In addition, they are equipped with a smart anti-collision feature, which allows several cards to be used simultaneously in the same field without interference. 

The memory of these cards has a lock function, which enhances data protection.

HitagS cards are used for applications in several areas, such as access control and identification; attendance control; loyalty cards and programmes; virtual wallets for self-service machines; and waste management, specifically the use of RFID cards to open access-controlled bins.

They are available in PVC, PETG and wood, in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood. The following types of HitagS chips are available: HitagS 256, HitagS 2048.

FM11RF08 cards are contactless RFID cards operating in HF at 13.56 MHz. They transmit data in read/writemode and comply with standard ISO 14443 A. With regard to security, these cards guarantee excellent performance. Indeed, they require three-step authentication before the read/write operation.

RFID FM11RF08 cards have an anti-collision feature, which allows multiple cards to be used simultaneously in the same magnetic field. They can be read up to a distance of 10 cm, depending on the antenna geometry, reader, environment and type of application. 

They are used for ticketing in public transport and for other similar applications.FM11RF08 cards are available in three different materials (PVC, PETG and wood), in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

RF005 cards are contactless cards operating in HF at 13.56 MHz. They comply with the ISO/IEC 14443 A standard and transmit data in read/write mode.Equipped with a 512-bit (64 bytes) EEPROM memory and a unique identifier, these cards also have a programmable read-only block, offering high levels of security.RF005 cards have anti-collision functionality and can be read at up to 10 cm, which varies depending on the antenna geometry, reader, environment and type of application. Applications include: access control at hotels, companies and educational facilities, and ticketing for public transport. They are available in three different materials (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

RF32 cards are high-frequency contactless cards operating at 13.56 MHz. Compliant with ISO standard 14443 A, they are particularly secure, requiringthree-step authentication before reading or writing.

The chip in these cards is equipped with an anti-collision algorithm, which allows multiple cards to be used simultaneously within the same reader range, and cyclic redundancy checks (CRC) for error detection, which makes RF32 cards highly reliable. 

RF32 cards have a reading distance of up to 10 cm, which varies depending on the antenna geometry, reader, environment and type of application. They are ideal for ticketing in the public transport sector and other similar applications.

They are available in three types of material (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

Mifare Classic cards are the most popular contactless RFID cards operating in the 13.56 MHz frequency range.

These RFID cards have a special anti-collision function, which allows several cards to be used simultaneously in the same field without interference.

Mifare Classic cards have both read and write capability, and are compliant with the ISO 14443 A standard. They have paved the way for several applications such as access control at hotels and companies, attendance control at schools and businesses, ticketing for public transport, car park management and electronic toll collection. 

They are available in PVC, PETG and wood, in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood. The following types of Mifare Classic chips are available: Mifare Classic 1K EV1 (in 4-byte IUD and 7-byte UID versions), Mifare Classic 4K EV1.

Mifare DESFire cards are RFID cards operating in high frequency, at 13.56 MHz. The high performance offered by these cards is already clear from their name. Indeed, ‘DES’ indicates the high level of security tied to the 3DES or AES hardware encryption engine used to encrypt data contained in the chip, while ‘Fire’ refers to its speed and reliability.

The data transmission mode of DESFire cards is read/write. In addition, they are equipped with an anti-collision function, which allows multiple cards to be used simultaneously within the same range of the reader without interference. 

Compliant with standard ISO 14443, these cards are also NFC Forum Type 4 compliant and therefore fully interoperable with NFC readers for Mifare transponders. 

Given their security and flexibility, Mifare DESFire cards are used in a wide range of applications, such as access control at hospitality facilities, schools and universities; ticketing for public transport; micropayments and loyalty programmes; tolls and parking; event ticketing.  

They are available in PVC, PETG and wood, with the following dimensions: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood. 

The following Mifare DESFire chips are available: Mifare DESFire EV1 2K, 4K, 8K; Mifare DESFire EV2 2K, 4K, 8K; Mifare DESFire EV3 2K, 4K, 8K; Mifare DESFire Light.

Mifare Ultralight cards are high-frequency contactless RFID cards operating at 13.56 MHz. Data transmission takes place in read/write mode.

These cards operate in accordance with standard ISO 14443 A with regard to the operation of contactless badges for identification, access control and electronic ticketing systems. In addition, they are compliant with the NFC Forum Type 2 protocol. The anti-collision algorithm allows several cards to be used in the same magnetic field, avoiding mutual interference.

Mifare Ultralight cards are widely used for identification in public transport, event ticketing and loyalty projects. 

They are available in three materials (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood. The following types of Mifare Ultralight chips are available: Mifare Ultralight EV1-1; Mifare Ultralight EV1-2; Mifare Ultralight C.

Mifare Plus cards are contactless RFID cards operating in the HF band at 13.56 MHz. They transmit data in read/write mode and comply with standard ISO 14443, which defines the operation of contactless smart cards in identification, access control and ticketing systems.

Mifare Plus RFID cards present an anti-collision feature, which allows multiple cards to be used simultaneously in the same field, ensuring that each transaction is carried out correctly, without interference. Furthermore, the integrity of the transmitted data is guaranteed by a three-pass mutual authentication algorithm.

With their high level of security, Mifare Plus cards are ideal for various applications in smart cities, such as access control and identification at hospitality facilities, schools and universities; loyalty cards and programmes; car parks; electronic toll collection, and micropayments.

They are available in three different materials (PVC, PETG and wood), in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood. The following types of Mifare Plus chips are available: Mifare Plus SE; Mifare Plus EV2 2K and 4K.

ATC1024 cards are contactless RFID cards operating in HF at 13.56 MHz. 

They comply with the ISO 15693 standard, which regulates the operation of so-called vicinity cards, contactless cards capable of being read at long distances. Indeed, ATC1024 cards offer a read/write distance of up to 70 cm, which also depends on the reader, environment and type of application. 

Equipped with a memory of about 1 kB and a UID, they are very safe, because the chip protects the stored data using three encryption keys (3DES, DES, LEGIC). 

ATC1024 cards are used for several projects concerning access control and identification. 

They are available in three different materials (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

ATC256 cards are HF RFID cards operating at 13.56 MHz. Their use is regulated by the ISO 15693 standard, which regulates the operation of vicinity cards, that is, contactless cards that can be read at greater distances than proximity cards. In particular, the operating distance of ATC256 cards can reach up to 70 cm depending on the reader, environment and type of application. 

These cards have a dynamically segmented 224-byte memory, and a unique identifier. Three encryption keys (AES 128/256 bits, 3DES, Legic) offer high levels of security.

ATC256 cards are ideal for access control at hospitality facilities and ticketing (events and public transport). 

They are available in three materials (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

ATC4096 cards are contactless cards operating in HF at 13.56 MHz. They comply with the ISO 14443 A standard, which defines the operation of cards used for electronic ticketing, access control, identification and payment systems.

Equipped with a dynamically segmented memory of 4096 bytes and a unique identifier, these cards can hold as many as 127 applications on a single chip. Their operating distance (read/write) is 10 cm.

ATC4096 cards offer high security standards. Indeed, the chip protects stored data using four different cryptographic keys (128/256-bit AES, 3DES, DES or Legic). 

They are ideal for all applications concerning access control, attendance control, payments and ticketing.

ATC4096 cards are available in three different materials (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

CTC4096 cards are RFID cards operating in high frequency at 13.56 MHz. Compliant with the ISO 14443 A standard, they allow up to 127 applications for a single card using only one antenna, thus reducing costs. 

Equipped with a 4-kB memory and UID, they have an operating distance (read/write) of up to 25 cm, which can vary depending on the reader, environment and application.

Data storage is protected by four different encryption keys (128/256-bit AES, 3DES, DES or Legic), ensuring high security standards.

CTC4096 cards are suitable for several applications, such as access control and electronic ticketing, identification of people and merchandise, and payment systems.

They are available in PVC, PETG and wood, in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood. The chip types available for CTC4096 are the following: CTC4096-MP410, CTC4096-MM410.

EM4233 cards are contactless RFID cards operating in HF at 13.56 MHz. They comply with the ISO 15693 standard, which defines the operation of so-called vicinity cards, which are capable of reading and writing at greater distances than proximity cards.

Equipped with a 2-kilobit memory (256 bytes) and a unique identifier (UID), these cards offer high data protection against theft. This is ensured by an encryption engine implemented in the chip, combined with a random generator and a 96-bit secret key. 

EM4233 cards are ideal for access control applications (hotels and hospitality, companies, schools and universities, gyms).

They are available in different materials — PVC, PETG and wood — in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

ICODE SLI-S cards are HF contactless RFID cards operating at 13.56 MHz. They follow the ISO/IEC 15693 protocol and have a high level of security. With a large memory capacity, these cards have a data transfer rate of up to 53 kbit/s and cyclic redundancy checks (CRC) for error detection. Furthermore, their anti-collision function makes it possible to detect other integrated circuits that are also present in the same magnetic field.

The reading distance of ICODE SLI-S cards can reach up to 1.5 m depending on antenna geometry, application, reader and the environment. These cards are excellent for asset management, supply chain projects, and pallet and container tracking.

Finally, ICODE SLI-S cards are available in PVC, PETG with dimensions 86 mm x 54 mm x 0.86 mm and in wood with dimensions 86 mm x 54 mm x 1.3 mm.

ICODE SLIX cards are contactless, high-frequency (HF) RFID cards operating at 13.56 MHz. 

Compliant with ISO standard 15693, they have a cyclic redundancy check (CRC) for error detection and an anti-collision protocol, which is useful for simultaneous operations of several integrated circuits in the same magnetic field.

The read/write distance of ICODE SLIX cards is 1.5 metres, which varies mainly according to the environment, antenna geometry and application. 

ICODE SLIX chip cards are ideal for identification projects, even on an industrial level. They are available in PVC or PETG measuring 86 mm x 54 mm x 0.86 mm, while in wood they measure 86 mm x 54 mm x 1.3 mm.

Icode DNA cards are high-frequency contactless RFID cards operating at 13.56 MHz. They operate in accordance with the ISO 15693 standard, which regulates the operation of vicinity cards designed to read and write over large distances. Indeed, their operating distance reaches 1.5 m. 

Icode DNA cards have a 252-byte user memory, UID and an anti-collision algorithm. They offer high levels of security due to the EAS and AFI functions for anti-theft purposes, and the 128-bit AES data-encryption key. 

These features make them particularly suitable for ski ticketing. 

They are available in different materials — PVC, PETG and wood — in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

MIM1024/Prime cards are contactless, high-frequency RFID cards operating at 13.56 MHz. The variable memory segmentation and protected read/write programmability make them remarkably flexible! MIM1024/Prime RFID cards comply with protocol ISO 14443 A and ensure high security standards with the ‘Master-Token’ system, which automatically manages the keys. The data collected can be transferred in encrypted mode. Excellent for any ticketing operation, these cards are also used for loyalty projects, access control and biometric data storage. Finally, MIM1024/Prime RFID cards are produced in PVC, PETG materials with dimensions 86 mm x 54 mm x 0.86 mm, while the dimensions for wood are 86 mm x 54 mm x 1.3 mm.

MIM256/Prime cards are contactless RFID cards operating at 13.56 MHz, i.e. HF. They feature special memory flexibility with variable segments, and can be programmed with protected read/write. Equipped with protocol ISO 14443 A, MIM256/Prime RFID cards have a ‘Master-Token’ function, which enables automatic key management. Moreover, the information collected by these badges is transferred in encrypted form. Finally, MIM256/Prime cards are used in ticketing for local public transport and events, loyalty projects, access control, and biometric data collection. They are available in PVC and PETG with dimensions 86 mm x 54 mm x 0.86 mm, while they are available in wood with dimensions 86 mm x 54 mm x 1.3 mm.

NTAG 210 cards are contactless cards operating at 13.56 MHz, i.e. high frequency. They comply with the ISO 14443 A standard, which regulates the operation of contactless smart cards, and with the NFC Forum Type 2 protocol. They have a memory of 48 bytes and a unique identifier, together with a programmable read-only lock function. Equipped with an anti-collision function, NTAG 210 cards can read and write up to a distance of 10 cm. They are particularly used for loyalty projects. NTAG 210 cards are available in PVC, PETG and wood, in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

Ntag213 RFID cards are contactless HF cards operating at 13.56 MHz. They are compliant with the NFC Forum Type 2 protocol. They follow the ISO 14443 A protocol and feature an anti-collision algorithm, which allows several tags to be read simultaneously in the same magnetic field. Ntag213 cards can be read up to a distance of 10 cm, depending on magnetic fields, the environment and application.NTag213 cards are mainly used foridentification, even in the industrial sector. They measure 86 mm x 54 mm x 0.86 mm for PVC and PETG, and 86 mm x 54 mm x 1.3 mm for wood.

Ntag215 RFID contactless cards operating in HF, 13.56 MHz, and in compliance with the NFC Forum Type 2 protocol. Compliant with standard ISO 14443 A, they feature an anti-collision function, which allows multiple tags to be read simultaneously in the same field, thus eliminating margins of error when reading. Ntag215 cards cover a reading distance of 10 cm depending on the context of application, magnetism and environmental conditions. They are also suitable for identification projects in various fields, including industry and retail. Finally, Ntag215 cards are available in PVC and PETG with dimensions 86 mm x 54 mm x 0.86 mm, and in wood with dimensions 86 mm x 54 mm x 1.3 mm.

Ntag216 cards are HF contactless cards operating at a frequency of 13.56 MHz. Manufactured according to standard ISO 14443, they have NFC Forum Type 2 technology and feature an anti-collision algorithm, which allows multiple tags to be read simultaneously in the same magnetic environment, avoiding errors.  Furthermore, Ntag216 cards are capable of being read up to a distance of 10 cm depending on the context, magnetism and reader used. As for applications, Ntag216 cards are also ideal for identification in industry and retail settings. Their dimensions vary depending on the material chosen. They measure 86 mm x 54 mm x 0.86 mm in PVC or PETG and 86 mm x 54 mm x 1.3 mm in wood.

NTAG 413 DNA cards are high-frequency contactless RFID cards operating at 13.56 MHz. They comply with the ISO/IEC 14443 A standard, which regulates the operation of proximity cards, and with the NFC Forum Type 4 protocol. Data security with NTAG 413 DNA cards is ensured by three-step mutual authentication and the Secure Unique NFC Message (SUN) function, which enables communication dedicated to each user based on established criteria. The applications of NTAG 413 DNA cards include access control and electronic vouchers. These badges are available in PVC, PETG and wood, in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

NTAG 424 DNA cards are contactless RFID badges that operate in the HF-band at 13.56 MHz. They follow standard ISO 14443 A for proximity cards. They also offer maximum interoperability in the NFC infrastructure, thanks to compliance with the Near Field Communication Forum Type 4 protocol. They are equipped with the Secure Unique NFC (SUN) message authentication mechanism, which is enabled for every reading performed by NFC devices. Furthermore, data protection is guaranteed by crypto-secure authorisations. NTAG 424 DNA cards are suitable for several applications in smart cities, including attendance control at companies, document authentication and loyalty programmes. They are available in PVC, PETG and wood, in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

ST25TB512 cards are HF contactless cards operating at a frequency of 13.56 MHz (carrier) and 847 kHz (subcarrier). They operate in accordance with standard ISO 14443 Type B, referring to parts 2 — for power and radio frequency — and 3 — for initialisation and anti-collision features. The latter feature allows several tags to be read in the same magnetic field, avoiding errors.

Designed for short-range reading applications, ST25TB512 cards are ideal for access control, personal identification and as electronic wallets.

Finally, ST25TB512 cards are available in wood, measuring 86 mm x 54 mm x 1.3 mm, and in PVC and PETG, measuring 86 mm x 54 mm x 0.86 mm.

Higgs 3 cards are contactless RFID cards operating in UHF at 868 MHz. They are manufactured according to EPC global Gen2 and ISO/IEC 18000-6C standards, and have a low power consumption during both programming and reading. In the latter case, these cards can be read over large distances, reaching up to 10 metres, depending on magnetic fields, the environment and type of application!

In addition, Higgs 3 cards can be programmed at low RF power and, in combination with customised ‘LoadImage’ commands, can be quickly configured.

As for applications, Higgs 3 cards are also well suited to industrial identification. They are available in PVC and PETG, measuring 86 mm x 54 mm x 0.86 mm, and in wood, measuring 86 mm x 54 mm x 1.3 mm.

Higgs 4 cards are contactless RFID cards operating in UHF at 868 MHz. Manufactured according to EPCglobal Gen2 and ISO/IEC 18000-6C standards, they operate at low power for reading and programming. Higgs 4 RFID cards can be read up to a distance of 11 metres, which varies depending on the antenna, environment and application.

These cards are ideal for all long-range identification operations, even in industry.

Finally, Higgs 4 cards are available in PVC and PETG with dimensions 86 mm x 54 mm x 0.86 mm and in wood with dimensions 86 mm x 54 mm x 1.3 mm.