-
RFID key fobs HP034
€0.00HP034 is an RFID key fob made of PVC, a ductile thermoplastic material resistant to both very high and low temperatures. Designed with a hole for a string and a distinctive teardrop shape, the entire surface can be customised using offset and pad printing, while serial numbering can be applied using laser and inkjet techniques. HP034 is available in LF, HF and combo (LF+HF) frequencies and comes in white.
-
RFID key fobs HP035
€0.00HP035 is an RFID key fob made of PVC, whose thermoplastic properties ensure good resistance to very high and low temperatures. It features two rectangular holes to easily insert a ribbon or string. It is rectangular in shape with rounded edges. The entire surface can be customised using offset and pad printing techniques. Serial numbering can be applied using laser or inkjet printing. HP035 can be ordered in LF, HF and combo (LF+HF) frequencies and comes in white.
-
RFID key fobs HP038
€0.00HP038 is an RFID key fob made of PVC, a ductile thermoplastic material with high resistance to very high and low temperatures. Designed with a hole for a string, it is rectangular in shape and the entire surface can be customised using offset or pad printing and epoxy printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies and comes in white.
-
RFID key fobs HP039
€0.00HP039 is an RFID key fob made of PVC, a thermoplastic material distinguished by its elasticity and resistance to very low and very high temperatures.
Rectangular in shape, it has a lanyard hole and can be customised over the entire surface using offset, pad printing and epoxy printing techniques. While serialisation is possible with laser and inkjet.
It is available in white, LF, HF and combo (LF+HF) frequencies. -
RFID Key Fobs KF007
€0.00KF007 is an RFID key fob made of PA6, a nylon with excellent mechanical properties, which is resistant to traction and compression, wear and atmospheric agents. With its characteristic teardrop shape and smooth surface, this keyfob has a hole for inserting a lanyard.
KF007 can be personalised using pad printing, while serial numbering can be applied using laser, inkjet and UV inkjet technologies. It is available in LF, HF, UHF and combined LF+HF and HF+UHF frequencies, in ten colours: red, orange, yellow, green, blue, navy blue, purple, white, grey, black.
-
RFID key fobs KF008
€0.00KF008 is an RFID key fob made of PA6 (nylon), a plastic material with excellent mechanical properties. Resistant to tensile stress and compression, it is also wear-resistant and weatherproof. Teardrop-shaped and featuring a lanyard hole, it can be customised using silkscreen printing, while serial numbering can be applied using laser and inkjet technology. KF008 is available in LF, HF and combined (LF+HF) frequencies and in the following colours: black, white, red, blue, green, yellow and orange.
-
RFID key fobs KF012
€0.00KF012 is an RFID key fob made of PVC, a flexible and ductile thermoplastic material with high resistance to very high and low temperatures. Designed with a hole for a string, it is rectangular and the entire surface can be customised using offset and pad printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies and comes in white.
-
RFID key fobs KF013
€0.00KF013 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties, such as good rigidity and hardness, impact resistance and water resistance. Designed with a hole for a string, it has a fresh and lively teardrop design enhanced by bright, attractive colours in the following combinations: black and white, white and grey, white and blue, white and purple, white and red, white and orange, white and pink, white and green, white and yellow. In addition, KF013 can be customised using inkjet printing, and serial numbering can be applied using laser technology. It is available in LF (chip: ATA5577 or T5567, EM4200) and HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE DESFIRE EV2 2K/4K/8K).
-
WB006 RFID wristbands
€0.00WB006 is a unisex wristband, Made in Italy using PVC, a versatile material give its resistance to water, wear, chemicals, fungi and bacteria.
Equipped with a tear-proof, non-allergenic metal snap fastener, special microwave welding and sweat-proof knurling, this wristband is designed for heightened comfort.
The dial and strap can be customised using pad printing, while serial numbering can be applied using laser technology. WB006 is available in LF with the EM4200 chip and in HF with the MIFARE CLASSIC 1K EV1 S50 chip. It comes in red, orange, yellow, green, light blue, blue, purple (strap) and black (dial). -
WB007 RFID wristbands
€0.00WB007 is a unisex RFID wristband made of silicone, a flexible, waterproof material that retains its elasticity even at very low temperatures, with good resistance to higher temperatures. Ergonomic and easy to wear, with adjustable clasp. The dial and strap can be customised using silkscreen printing, while serial numbering can be applied using laser technology. WB007 is available in both LF and HF, in the following colours: red, yellow, green, blue and others on request.
-
WB011 RFID wristbands
€0.00WB011 is a unisex RFID wristband made of silicone, a flexible material that retains its elasticity at very low temperatures while being resistant to high temperatures, especially in hot, damp environments. Equipped with a non-allergenic metal snap, it stands out with its elegant design and rounded edges, ensuring high comfort and a pleasant feel. The strap can be customised using silkscreen printing; serial numbering can be applied using laser technology. It is available in high and low frequencies, in the following colours: red, yellow, green, blue and others on request.
-
WB101 RFID wristbands
€0.00WB101 is a unisex RFID wristband made of PET, a material that offers excellent resistance to high temperatures, weathering, cuts and abrasions. It has a snap fastener. The dial and strap can be customised using offset printing, while serial numbering can be applied using thermographic printing; barcodes or QR/data matrix codes can also be printed. Available in HF, with a MIFARE CLASSIC 1K EV1 S50 chip; available in white.
Toggle Nav
Search
Language
Products
Configure
