-
HT004 hard tags
€0.00HT004 is an RFID bin tag made of PA6 (nylon), a plastic material resistant to tensile stress and compression, wear, and weather. The resin coating is made of PUR or polyurethane, which features good resistance to water, salt and moisture.
Round in shape, the bin tag is designed for application on waste-collection bins. Its standard size — 30.5 mm in diameter — makes it easy to install and integrate into metal or plastic containers. The special screw structure prevents tampering and theft. HT004 can be customised with embossing and is available in LF — with SIC279 and EM4200 chips — in black and red, and in UHF, both European and US, with the HIGGS 3 chip, in black. -
HT007 hard tags
€0.00HT007 is an RFID hard tag made of ABS, a thermoplastic material that has a high resistance to chemicals, moisture and very high temperatures. It also possesses good mechanical properties, which ensure excellent dimensional stability and high resistance to breakage and deformation. With its IP69 rating, HT007 is resistant to water and dust. The 3 mm hole is used for application on non-metal surfaces using screws or an adhesive backing. Round in shape, it has a 30-mm diameter and can be customised using silkscreen printing and pad printing, while serial numbering can be applied using laser technology. It is available in black in LF with the EM4200 chip and in HF with the ICODE SLIX2 chip.
-
HT019 hard tags
€0.00HT019 is an RFID hard tag made of epoxy resin, a thermosetting polymer that is resistant to liquids, impacts and abrasion, extreme temperatures, weather and acids. Compliant with standard RFID readers and modules, it is ATEX certified for safe use in potentially explosive environments.
Round in shape and small in size and weight — it weighs 1 gram with a 16-mm diameter and 3-mm height! — this tag can be discreetly applied — sewn, embedded or glued — to non-metal surfaces. It is black, available in LF with the EM4200 chip and can be customised with a logo using pad printing. -
HT020 hard tags
€0.00HT020 is a ‘PCB tag’ featuring a PCB (printed circuit board) substrate, an insulating printed circuit board that connects various electronic components. It is protected by a fibreglass plate covered with a light layer of metal applied using high-temperature pressing following the lamination process.
Round, remarkably small and very light — it has a diameter of just 6.9 mm and a height of 0.94 mm, with a weight of just 0.5 grams! — HT020 is designed for smart management of projects requiring a small, discreet tag that can be applied to non-metal surfaces. It is applied using adhesive and is available in HF with the ICODE SLIX chip. -
HT021 hard tags
€0.00HT021 is a ‘PCB tag’ comprising a printed circuit board (PCB) substrate, an insulating printed circuit board that connects several electronic components, protected by fibreglass. This layer is covered by thin metal applied via high-temperature rolling. Finally, the tag surface features a thin polycarbonate plate.
Round in shape, small in size and lightweight — with a diameter of just 7.9 mm, 0.9 mm in height and weighing 0.5 grams — HT021 is designed for application on metal objects requiring non-invasive tags. It can be affixed with an adhesive backing or via an insert moulding process, and is available in HF with the ICODE SLIX chip. -
HT022 hard tags
€0.00HT022 is an RFID hard tag made of PA9T nylon resin, a special polyphthalamide with outstanding properties in terms of dimensional stability, fluidity and thermal, chemical and abrasion resistance.
Round in shape, it has a slim but robust housing. With a 22-mm diameter, 3-mm thickness, and 3.1-mm central hole, HT022 is designed to withstand harsh conditions. It can be applied to metal, either using an adhesive backing or inserting a screw through the hole. Available in black in HF, with the ICODE SLIX chip, it can be customised with a logo using pad or laser printing. Numbering is applied using laser technology. -
HT023 hard tags
€0.00HT023 is a ‘button tag’ — it resembles a button — made of nylon, an ultra light material that is resistant to wear, tensile stress and chemicals, as well as mould and bacteria.
Round, very small and very light — with a diameter of 10 mm, it is 1.9 mm thick and weighs only 0.3 grams! — HT023 is designed for application in small spaces on non-metal objects using an adhesive backing. Available in black in HF with the ICODE SLIX chip, a logo can be applied to the button tag using pad and laser printing, while numbering is always applied using laser technology. -
HT024 hard tags
€0.00HT024 is an RFID hard tag made of nylon, a thin, robust material that is lightweight and extremely resistant to impacts, chemicals, mould and bacteria.
Circular in shape, it has a slim but robust housing, and is available in two sizes: a 30- or 50-mm diameter with 3-mm thickness and 5.2-mm central hole. HT024 has excellent resistance to critical working conditions and is designed for non-metal surfaces, with application via adhesive backing or screws. Available in black in HF with the ICODE SLIX chip, the tag can be customised with a logo using pad or laser printing. Numbering is applied using laser technology. -
HT025 hard tags
€0.00HT025 is a ‘button tag’ made of nylon, a material that is both thin and strong, while offering high resistance to impacts, chemicals and bacteria. Round, ultra thin and ultra small — 16.2 mm in diameter, 1.35 mm thick and weighing just 0.3 grams — this RFID tag is designed for application on small, non-metal objects using an adhesive backing. HT025 is available in black in HF with the ICODE SLIX chip. A logo can be applied to the button tag using pad or laser printing, while numbering is applied using laser technology.
-
HT028 hard tags
€0.00HT028 is a ‘button tag’ — it resembles a button — made of nylon featuring robustness and resistance to impacts, chemicals, mould and bacteria.
Circular in shape, it is very small and thin, as well as being very light. It is available in two sizes: 12.4 mm in diameter with a 2-mm thickness, and 14.5 mm in diameter with a 3-mm thickness. This discreet RFID tag is designed for application on small, non-metal surfaces via an adhesive backing. HT028 is available in black in HF with the ICODE SLIX chip. In addition, it can be customised with a logo using pad or laser printing, while numbering is applied using laser technology. -
HT060 hard tags
€0.00HT060 is an RFID hard tag made of FR4 (flame resistant), a material made of fibreglass with an epoxy resin matrix, which makes it flame retardant. It has a high electrical resistance and very low degree of moisture absorption.
Round in shape, it is available in two sizes — a 5- or 6-mm diameter, a thickness of 4 mm and a central hole of 2 mm — and is very light, weighing just 0.5 grams. Available in black and yellow, it can be either screwed or glued onto the surface or in the cavities of metal objects. It is produced in European and US UHF, with the HIGGS 3 chip. -
HT063 hard tags
€0.00HT063 is an RFID hard tag made of nylon, an industrial plastic resistant to tensile stress, wear and chemicals.
Robust, round in shape, it is 34 mm in diameter and 6 mm thick, with a 5-mm central hole, and weighing 7 grams. Designed to operate in harsh conditions and at very high temperatures — a maximum of +200°C for half an hour — this tag is optimised for metal surfaces, but can also be affixed on non-metal surfaces using an adhesive backing or screws.
It is available in European and US UHF with the MONZA 4QT chip and in HF with the MIFARE 1K CLASSIC EV1 S50 chip. Black in colour, it can be customised with a logo using pad or laser printing, while serial numbering can be applied using laser technology. -
HT090 hard tags
€0.00HT090 is a ‘button tag’ made of nylon, a plastic resistant to impacts, wear and weather that is industrially hardened via overmoulding.
Round in shape, this small, lightweight ‘button tag’ — 12.4 mm by 2 mm and only 0.3 grams! — is designed for tracking small objects or for incorporation using an adhesive backing in confined spaces within items to be identified. Suitable for application on non-metal materials, it is available in LF with the EM4200 chip and comes in black. In addition, it can be customised with logos using pad or laser printing, while numbering is only applied using laser technology.
Toggle Nav
Search
Language
Products
Configure
