-
Hard tag HT072
€0.00HT072 is an RFID hard tag made of PEEK, a thermoplastic material with reduced wear sensitivity, as well as with high impact and high temperature resistance. Rectangular in shape, it measures 41 x 29 x 9 mm, weighs 15 grams and can be screwed through four holes with a diameter of 2.3 mm on metal surfaces.
Its physical characteristics allow it to support very high standards, reaching peak temperatures at:- 300°C for 100 hours;
- 280°C for 1000 hours;
- 260°C for 2000 hours;
In addition, HT072 is available in black, with UHF frequency - both European and US - and UCODE 8 chip. Therefore, due to these technical specifications, this RFID hard tag achieves large reading ranges: up to 6 metres with a fixed reader and up to 3.5 metres with a handheld device.
Both the printing and numbering of HT072 are done using laser technology. -
HP097 hard tags
€0.00HP097 is a hard tag made of PVC, a flexible and ductile thermoplastic that is very resistant to high and low temperatures. Rectangular in appearance, it measures 120 mm x 20 mm x 1.1 mm. It has two side holes measuring 4 mm in diameter, and it weighs 3.8 grams. It can be applied to non-metal surfaces and is anchored using screws inserted in the two holes or with adhesive backing. Available in European and US UHF with the UCODE 9 chip, it can be read at a distance of 8 metres. White in colour, it can be customised with a logo using offset or pad printing, while numbering can be applied using laser or inkjet technology.
-
HT033 hard tags
€0.00HT033 is an RFID hard tag made of PA6+30GF, a polyamide consisting of 30% fibreglass, which makes the nylon more rigid, resistant to compression and dimensionally stable. Rectangular in shape — measuring 52.8 mm x 44 mm x 11 mm and weighing 28 grams — this robust RFID tag is designed to be screwed onto metal objects. Available in grey in UHF (both European and US frequencies) with the UCODE 8 chip, it can be customised with a logo using pad and laser printing, while serial numbering is applied using laser technology.
-
HT040 hard tags
€0.00HT040 is an RFID hard tag made of polycarbonate, a thermoplastic material with excellent temperature and flame resistance, while also featuring hardness, impact resistance and good dimensional stability.
Rectangular in shape, this small, lightweight tag — measuring 37.7 mm x 13.7 mm x 4.85 mm and weighing 2.2 g — can be applied to all types of surfaces by means of an adhesive or cord. It is designed for IT asset management. Available in both European and US UHF, with the MONZA R6P and MONZA 4QT chips, its reading range extends up to 5 metres.
Black in colour, the customisable part of HT040 is white and can be printed using an RFID thermal transfer printer. -
HT067 hard tags
€0.00HT067 is an RFID hard tag made of engineering plastic, whose high performance makes it resistant to mechanical impacts, chemical reagents and both high and low temperatures.
Rectangular in shape, HT067 weighs approximately 19 grams and measures 54 mm x 36 mm x 12.5 mm. Designed for application on dense metal surfaces using an adhesive backing or screws, it is available in European and US UHF with the UCODE 8 chip. Yellow in colour, this tag can be customised using laser technology. -
HT068 hard tags
€0.00HT068 is an RFID hard tag made of polycarbonate (PC), a thermoplastic material with high resistance to temperature changes and fire, with elevated hardness and stress resistance.
Rectangular in shape, HT068 weighs about 19 grams and measures 54 mm x 36 mm x 12.5 mm. Applicable to non-metal surfaces using an adhesive backing or screws, it is available in European and US UHF with the UCODE 8 chip. Available in blue, it can be customised using a laser printer. -
HT071 Hard tag
€0.00HT071 is an RFID hard tag made of nylon, a material which gives rigidity, compressive strength and dimensional stability. Rectangular in shape - measuring 78 x 21 x 11 mm - this robust RFID tag is designed to be applied to even narrow metal objects by screwing.Available in UHF frequency (both European and US) with the UCODE 8 chip, in black, it can be customised with a logo by pad printing and laser printing, while serialisation is done by laser technique. -
HT084 hard tags
€0.00HT084 is a ‘Seal tag’ — as it is typically used — made of nylon 66 (PA66), a plastic material resistant to impacts, wear and weather.
With its excellent abrasion resistance, flexibility and compactness, it is therefore ideal where durable, secure and fast application of cable tie tags are required for non-metal surfaces.
It measures 348 mm x 28 mm x 4 mm, weighs 6 grams and is available in three frequencies: LF, HF, UHF. Black or green, it can be customised with a logo using silkscreen printing, while numbering is applied using laser technology. -
HT085 hard tags
€0.00HT085 is a ‘sleeve tag’ or ‘tag anchored to objects using a cable tie’ made of PA6, an ultrasound-sealed nylon that provides good thermal protection and perfect resistance to impacts, pressure and other mechanical stresses. Rectangular in shape — 27 mm x 20.7 mm x 9.6 mm — and weighing 4.7 grams, this tag can be anchored to metal surfaces by means of plastic or metal cable ties. It is available in LF with the EM4200 chip, in HF with the ICODE SLIX and NTAG216 chips, and in UHF (European and US frequencies) with the HIGGS 3 chip. It is produced in red, yellow, green, blue, black. HT085 can be customised with a logo using silkscreen printing, while serial numbering is applied using laser technology.
-
HT086 hard tags
€0.00HT086 is a hard ceramic tag featuring low electrical conductivity and resistance to high temperatures. Rectangular, small and thin — measuring 10 mm x 5 mm x 3 mm — it is ideal for small spaces and can be glued to the surface of metal objects. HT086 is yellow and available in European and US UHF with the UCODE 8 chip.
Toggle Nav
Search
Language
Products
Configure
