-
Hard tag HT072
€0.00HT072 is an RFID hard tag made of PEEK, a thermoplastic material with reduced wear sensitivity, as well as with high impact and high temperature resistance. Rectangular in shape, it measures 41 x 29 x 9 mm, weighs 15 grams and can be screwed through four holes with a diameter of 2.3 mm on metal surfaces.
Its physical characteristics allow it to support very high standards, reaching peak temperatures at:- 300°C for 100 hours;
- 280°C for 1000 hours;
- 260°C for 2000 hours;
In addition, HT072 is available in black, with UHF frequency - both European and US - and UCODE 8 chip. Therefore, due to these technical specifications, this RFID hard tag achieves large reading ranges: up to 6 metres with a fixed reader and up to 3.5 metres with a handheld device.
Both the printing and numbering of HT072 are done using laser technology. -
HP096 hard tags
€0.00HP096 is a hard tag made of PVC, a flexible and ductile thermoplastic with elevated resistance to high and low temperatures. Rectangular in shape, it measures 100 mm x 24.5 mm x 1.5 mm and weighs 5 grams. It can be applied to non-metal surfaces and to metal surfaces on request. It is equipped with two holes for anchoring to objects using screws. White in colour and available in LF, HF and UHF, it can be customised with a logo using offset or pad printing, while numbering can be applied using laser or inkjet technology.
-
HT071 Hard tag
€0.00HT071 is an RFID hard tag made of nylon, a material which gives rigidity, compressive strength and dimensional stability. Rectangular in shape - measuring 78 x 21 x 11 mm - this robust RFID tag is designed to be applied to even narrow metal objects by screwing.Available in UHF frequency (both European and US) with the UCODE 8 chip, in black, it can be customised with a logo by pad printing and laser printing, while serialisation is done by laser technique. -
HT084 hard tags
€0.00HT084 is a ‘Seal tag’ — as it is typically used — made of nylon 66 (PA66), a plastic material resistant to impacts, wear and weather.
With its excellent abrasion resistance, flexibility and compactness, it is therefore ideal where durable, secure and fast application of cable tie tags are required for non-metal surfaces.
It measures 348 mm x 28 mm x 4 mm, weighs 6 grams and is available in three frequencies: LF, HF, UHF. Black or green, it can be customised with a logo using silkscreen printing, while numbering is applied using laser technology.
Toggle Nav
Search
Language
Products
Configure
