Products

HP095 is a hard tag made of PVC, a ductile plastic featuring flexibility and an elevated resistance to high and low temperatures. Rectangular in shape, this tag measures 130 mm x 15 mm x 1 mm. It can be anchored to non-metal and metal surfaces — the latter on request — by inserting screws through the two misaligned holes on the surface. White in colour, it is available in UHF — both European and US frequencies — with the UCODE 9 chip, offering a reading distance of up to 8 metres.
HP095 can be customised with a logo using offset or pad printing. Numbering can be applied using laser or inkjet technology.

HP096 is a hard tag made of PVC, a flexible and ductile thermoplastic with elevated resistance to high and low temperatures. Rectangular in shape, it measures 100 mm x 24.5 mm x 1.5 mm and weighs 5 grams. It can be applied to non-metal surfaces and to metal surfaces on request. It is equipped with two holes for anchoring to objects using screws. White in colour and available in LF, HF and UHF, it can be customised with a logo using offset or pad printing, while numbering can be applied using laser or inkjet technology.

HP097 is a hard tag made of PVC, a flexible and ductile thermoplastic that is very resistant to high and low temperatures. Rectangular in appearance, it measures 120 mm x 20 mm x 1.1 mm. It has two side holes measuring 4 mm in diameter, and it weighs 3.8 grams. It can be applied to non-metal surfaces and is anchored using screws inserted in the two holes or with adhesive backing. Available in European and US UHF with the UCODE 9 chip, it can be read at a distance of 8 metres. White in colour, it can be customised with a logo using offset or pad printing, while numbering can be applied using laser or inkjet technology.

HP098 is a hard tag made of PVC, a flexible, ductile and temperature-resistant thermoplastic. Rectangular in shape, it measures 120 mm x 30 mm, and it has two side holes with a diameter of 4 mm. It is affixed to non-metals either by screwing through the two holes or with adhesive backing. Available in UHF, both European and US, with the HIGGS 9 chip, it is white in colour. In addition, it can be customised with logos using offset or pad printing processes, while numbering is applied using laser or inkjet technology. 

HT003 is an RFID hard tag made of ABS, a thermoplastic polymer featuring a high resistance to impact and both high and low temperatures. In fact, HT003 can reach a maximum temperature of 80°C during storage. This RFID hard tag is applied to non-metal surfaces by screwing through the two side holes, or using an adhesive backing. 
Rectangular in shape, it measures 78.7 mm x 30.8 mm x 9.2 mm, and is customised using silkscreen printing and pad printing. Serial numbering is applied using laser technology. It is available in dark grey in UHF, both European and US, with the HIGGS 3 chip.

HT004 is an RFID bin tag made of PA6 (nylon), a plastic material resistant to tensile stress and compression, wear, and weather. The resin coating is made of PUR or polyurethane, which features good resistance to water, salt and moisture. 
Round in shape, the bin tag is designed for application on waste-collection bins. Its standard size — 30.5 mm in diameter — makes it easy to install and integrate into metal or plastic containers. The special screw structure prevents tampering and theft. HT004 can be customised with embossing and is available in LF — with SIC279 and EM4200 chips — in black and red, and in UHF, both European and US, with the HIGGS 3 chip, in black.

HT006 is an RFID hard tag made of ABS, a thermoplastic material with very good mechanical properties, such as stiffness, hardness and impact and water resistance.
Rectangular in shape, this tag is specially designed for outdoor industrial asset management. It can be used on metal and non-metal surfaces. It measures 85 mm x 20 mm x 11 mm, and can be applied using rivets, screws or adhesive. Available in UHF, both European and US, it is manufactured with the HIGGS 9 chip. It has a large reading distance which, with the European frequency and on metal surfaces, can reach up to 6 metres. On non-metals it reaches up to 6.5 metres. When the tag with US frequency is applied to metals, it can be read up to a distance of 12 m, while on non-metals the reading distance can reach up to 7 m. Note that the tag reading depends on the reader, environment and application. It is also available in grey, and can be customised using laser technology.

HT014 is an RFID hard tag made of PCB, an extremely corrosion- and temperature-resistant material. Ideal for interconnecting electronic components, it is snap-on and traces tubes and cables.
It has a ring shape, a diameter of ø 30 mm and is available in white.
Operating in the UHF frequency with the Ucode 8 chip, it covers high reading distances that depend on the RFID reader, the environment and the application.

HT032 is a ‘mould tag’, a special RFID tag that is embedded into the product via injection moulding during production. It is made of FPC (flexible printed circuit), a printed circuit consisting of a polyamide or polyester film which is extremely light, thin and flexible. Yellow in colour and rectangular in shape, it measures 70 mm x 11 mm x 0.6 mm. Weighing just 0.2 grams, it is designed to be embedded in non-metal objects. HT032 is resistant to very high temperatures. The HIGGS 3 chip operates in UHF (European and US frequencies) and can be read at a distance of up to 9 metres.

HT040 is an RFID hard tag made of polycarbonate, a thermoplastic material with excellent temperature and flame resistance, while also featuring hardness, impact resistance and good dimensional stability.
Rectangular in shape, this small, lightweight tag — measuring 37.7 mm x 13.7 mm x 4.85 mm and weighing 2.2 g — can be applied to all types of surfaces by means of an adhesive or cord. It is designed for IT asset management. Available in both European and US UHF, with the MONZA R6P and MONZA 4QT chips, its reading range extends up to 5 metres.
Black in colour, the customisable part of HT040 is white and can be printed using an RFID thermal transfer printer.

HT058 is an RFID hard tag made of TPV (thermoplastic vulcanisate), an elastomer combining the advantages of thermoplastic materials with those of rubber. It retains good dimensional stability at high temperatures and is resistant to tensile stress and breakage, UV aging, ozone and weather. Rectangular in shape, it measures 83 mm x 26 mm x 2.6 mm and weighs 5 grams. With its flexibility, HT058 perfectly adapts to irregular and curved surfaces, and can be attached to metal and non-metal objects using the holes provided and a Panduit cable tie. This application prevents tampering. Available in yellow, in both European and US UHF with the MONZA 4QT chip, it offers a large reading distance of up to 9 metres. It can be customised with a logo or barcode engraving, which can be applied using pad or laser printing. Numbering is applied using laser technology.

HT063 is an RFID hard tag made of nylon, an industrial plastic resistant to tensile stress, wear and chemicals.
Robust, round in shape, it is 34 mm in diameter and 6 mm thick, with a 5-mm central hole, and weighing 7 grams. Designed to operate in harsh conditions and at very high temperatures — a maximum of +200°C for half an hour — this tag is optimised for metal surfaces, but can also be affixed on non-metal surfaces using an adhesive backing or screws.
It is available in European and US UHF with the MONZA 4QT chip and in HF with the MIFARE 1K CLASSIC EV1 S50 chip. Black in colour, it can be customised with a logo using pad or laser printing, while serial numbering can be applied using laser technology.

HT068 is an RFID hard tag made of polycarbonate (PC), a thermoplastic material with high resistance to temperature changes and fire, with elevated hardness and stress resistance.
Rectangular in shape, HT068 weighs about 19 grams and measures 54 mm x 36 mm x 12.5 mm. Applicable to non-metal surfaces using an adhesive backing or screws, it is available in European and US UHF with the UCODE 8 chip. Available in blue, it can be customised using a laser printer.

HT070 is a waterproof and extremely durable RFID hard tag in high-impact plastic that is resistant to impacts, cuts, high-pressure washing and high temperatures. Rectangular in shape, it weighs 15 grams and is available in two sizes — 97 mm x 27 mm x 15 mm and 97 mm x 27 mm x 10 mm. It allows for omnidirectional reading over long distances. The thinnest one — 10 mm — reaches 5 metres, while the thickest — 15 mm — reaches 8 metres. HT070 is configured for attachment via screws or welding on any material, whether metal or non-metal, such as plastic and wood. It is available in UHF — both European and US — with the MONZA 4QT chip. Produced in blue and grey, it can be customised with an embossed printed logo, while serial numbering can be applied using laser technology.

HT082 is an RFID hard tag made of TPU, thermoplastic polyurethane, a non-toxic polymer featuring elasticity, flexibility, oil and abrasion resistance, as well as being water and gas proof.
With its distinctive funnel shape, HT082 is a tag for animals, thus for non-metal surfaces, comprising a ‘male’ part — 100 mm x 75 mm x 13 mm — and a ‘female’ part — ø 29 mm x 23 mm. These two components are attached to the ears of cattle on breeding farms by means of an interlocking device. In addition, the HT082 weighs 16 grams and covers large reading distances: up to 6 metres when read from a fixed device, and up to 3 metres when using a handheld reader. Available in UHF — both European and US frequencies — with the UCODE 8 chip, it comes in yellow, orange and blue. Finally, numbering can be applied using laser or inkjet technology.

HT084 is a ‘Seal tag’ — as it is typically used — made of nylon 66 (PA66), a plastic material resistant to impacts, wear and weather. 
With its excellent abrasion resistance, flexibility and compactness, it is therefore ideal where durable, secure and fast application of cable tie tags are required for non-metal surfaces.
It measures 348 mm x 28 mm x 4 mm, weighs 6 grams and is available in three frequencies: LF, HF, UHF. Black or green, it can be customised with a logo using silkscreen printing, while numbering is applied using laser technology.

HT088 is a tag made of ABS, a material characterized by high resistance to shock and temperature changes. This hard RFID tag is characterized by its Metal pin, thanks to the metal cable and the magnetic lock.
The surface of this reusable tag - you can disassemble it and use it again after first use - measures 60 x 28 x 5 mm, the metal cord is 175 mm long and the magnetic pin has a diameter of 20 mm. Its weight is 9.5 grams.
HT088 is available in the European and US UHF frequency with the Monza R6P chip, in green and white, and is customizable with laser technology.

LB001 is a flexible RFID label made of coated paper. It is rectangular and measures 40 mm x 60 mm. The inlay is 11 mm x 45 mm and is suitable for non-metal surfaces. Printing and serial numbering are applied using offset or inkjet technology, either colour or black and white. The thermographic technique is used when printing in black and white.
LB001 is a white RFID label available in UHF, and is equipped with the HIGGS 9 chip.

LB003 is a flexible and adhesive paper RFID label. Rectangular, it measures 70 mm x 35 mm x 0.23 mm and is applied to non-metal surfaces. It can be customised: printing and serial numbering are applied using the offset or inkjet technique for colour and black-and-white prints, and thermographic printing for black-and-white prints. LB003 is white and available in UHF with the UCODE 7 chip.

LB006 is a flexible RFID label made of PP (polypropylene), a ductile thermoplastic material with a high resistance to impacts and high temperatures. This label can tolerate up to 100°C during operation! 
Rectangular in shape, it measures 110 mm x 38 mm x 0.35 mm and is suitable for application on glass and other non-metal surfaces via an adhesive backing. Printing and numbering are applied using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. LB006 is white and available in UHF, with MONZA 4E and MONZA 4QT chips. The reading distance is large and depends on the reader, environment and application.

LB009 is a flexible and adhesive paper RFID label. It is rectangular in shape and measures 45 mm x 22 mm x 0.3 mm. It is applied to non-metal materials by means of an adhesive. It can be customised using offset or inkjet technology in colour and black and white, and thermographic printing in black and white. White in colour, LB009 is available in  UHF, with the MONZA R6 chip, and can be read over large distances, which vary depending on the environment, application and reader.

LB011 is a flexible and adhesive paper RFID label. Rectangular in shape, it measures 110 mm x 35 mm x 0.25 mm, while the antenna inlay is 100 mm x 12 mm. It is suitable for application on non-metal materials with an adhesive backing. Printing and numbering are carried out using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. White in colour, it operates in the UHF band with the HIGGS 3 chip.

LB012 is an RFID label made of PET, a thermoplastic material featuring flexibility, resistance to cuts, weather and high temperatures. It can tolerate up to 85°C during operation. Rectangular in shape, it is covered with a layer of semi-gloss paper and measures 73 mm x 17.6 mm x 0.3 mm. LB012 is designed for adhesive application on non-metal materials that are hard to label, such as cardboard and plastic. It can be customised using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. It is white and available in  UHF with the UCODE 8 chip.

LB013 is a flexible and adhesive paper RFID label. Rectangular in shape, it measures 54 mm x 34 mm x 0.2 mm, while the antenna inlay is 50 mm x 30 mm. It is ideal for application on non-metals by means of an adhesive backing. It can be customised using offset or inkjet technology in colour and black and white, and thermographic printing in black and white. White in colour, it is available in UHF with the MONZA R6P chip, with a reading distance that can be adjusted depending on the environment, reader and application.

LB014 is an RFID label made of PET, a flexible, cut- and weather-resistant thermoplastic material. It is rectangular and measures 54 mm x 34 mm x 0.24 mm. LB014 can be applied to non-metal surfaces using a special adhesive. Printing and serial numbering are applied using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black and white only. White in colour, it is available in UHF with the UCODE 7 chip. The reading distance depends on the environment, reader and application.

LB015 is an RFID label made of PET, a flexible plastic that is resistant to cut and weather. Rectangular in shape, it measures 44 mm x 19 mm x 0.2 mm and can be applied to non-metal surfaces using a special adhesive. Printing and serial numbering can be performed using offset or inkjet technology in colour and black and white, and thermographic printing for black and white only. LB015 is white and available in UHF with the UCODE 8 chip.

LB020 is an RFID tag made of PET, a flexible thermoplastic material that is resistant to cuts, atmospheric changes and high temperatures. Indeed, this label can tolerate up to 70°C in operation and storage. Rectangular in shape, it measures 106.5 mm x 28.5 mm; the antenna has the following dimensions: 95 mm x 12 mm. LB020 is applied to non-metal materials by means of an adhesive backing. Printing and numbering can be carried out using offset or inkjet technology for colour or black-and-white prints, and thermographic printing for black and white. It is white and available in UHF with UCODE 8 chips, with both European and US frequencies.

LB021 is an adhesive RFID tag made of coated paper.
Rectangular in shape, it measures 73 mm x 17 mm, while the antenna inlay is 70 mm x 14 mm.
LB021 can be applied to non-metals with an adhesive backing. It can be customised using offset or inkjet technology for colour or black-and-white prints, and thermographic printing for black and white. It is white and available in UHF, with the MONZA M730 chip.

LB023 is an adhesive paper RFID label.
Square in shape, it measures 40 x 40 mm with an inlay of 22.5 x 22.5 mm and can be applied to non-metal surfaces, via adhesive support.
This label can be customised by offset or inkjet printing, if in colour or black and white, and with a thermographic printer, if in black
and white.
It is white in colour with UHF frequency and HIGGS3 chip.

LB024 is a coated paper adhesive RFID label, rectangular in shape. It measures 54 x 34 mm, the inlay measures 50 x 30 mm.
It reads up to 8 metres, guarantees excellent performance operating in the UHF frequency with the UCODE 9 chip.
LB024 is applied to non-metal surfaces, via adhesive.
This label can be customised with offset or inkjet printing, if in colour or black and white, and with a thermographic printer, if in black and white.

LB025 is an adhesive RFID label in synthetic paper or in PET, rectangular in shape. It measures 53 x 33 mm, the inlay measures 50 x 30 mm.
LB025  can  be  applied  to non-metallic surfaces by means of the adhesive. In addition, it can be customised with offset or inkjet, for colour and black and white prints, and with thermography, for black and white prints. White, it is available in the UHF frequency, with the UCODE8 chip.

LB027 is a synthetic paper RFID tag available in UHF with the HIGGS-EC chip.
It measures 100 x 32 mm and is readable up to 10 m with a fixed reader. 
The special feature of the LB027 RFID smart label is its tamper-proof design.
In addition, it can be applied to non-metallic surfaces, more precisely glass, by means of an adhesive.
LB027 can be customised by offset or inkjet, for colour and black and white prints, and by thermography, for black and white prints.

LB028 is a PET adhesive RFID label, rectangular in shape.
It measures 85 x 65 mm, with an inlay of 70 x 17 mm. 
It reads up to 6 meters, ensures excellent performance by operating in the UHF frequency with UCODE 9 and HIGGS 9 chips. 
LB028 is applied by adhesive to glass and non-metallic surfaces.
Printing and numbering is done by offset or inkjet, for color and black-and-white prints, and by thermography, for black-and-white prints.

LB029, is an adhesive RFID tag made of PET, round. 
Due to its special strength and thickness, it has a high resistance to water and environmental stress. 
It has a diameter of 25 mm, its inlay measures 21 mm and is applied to non-metallic surfaces by means of adhesive. 
LB029 is an NFC label that operates at a frequency of 13.56 Mhz in HF, High Frequency, with the NTAG 213 chip.
LB029 can be printed using offset or inkjet techniques in both color and black and white, and with thermography only in black and white.

LB032 is an adhesive RFID tag made of PET, rectangular in shape. 
It measures 64 x 28 mm and operates in the UHF frequency with the MONZA M730 chip. LB032 is applied by adhesive to non-metallic surfaces.
Offset or inkjet printing is suitable for both colour and black-and-white prints, while thermography is used specifically for black-and-white prints.

WT001 is a wet inlay made of PET, a flexible, cut- and weather-resistant thermoplastic material. Rectangular in shape, it measures 100 mm x 12 mm x 0.10 mm and can be applied to non-metal surfaces by means of an adhesive backing. Transparent in colour, it is available in UHF with the HIGGS 3 chip.

WT002 is a wet inlay made of PET. It is flexible, cut- and weather-resistant.  Rectangular in shape, it measures 36 mm x 22 mm x 0.23 mm and can be applied to non-metal materials by means of a special adhesive. It has a transparent surface, and is available in UHF with the MONZA R5 chip.

WT003 is a wet inlay made of PET, a material featuring flexibility and resistance to cuts and thermal shocks. Rectangular in shape, it is adhesive and flexible, andmeasures 64 mm x 6 mm.
It has a transparent surface, is applied using an adhesive and is suitable for non-metal materials. WT003 is available in UHF with the UCODE 8 chip in both European and US frequencies.

WT005 is a wet inlay made of PET, a type of thermoplastic material featuring flexibility, cut resistance and resistance to temperature changes.
Square in shape, it is adhesive and flexible; it measures 48 mm x 48 mm, and has a transparent surface. Suitable for non-metal surfaces, it is available in UHF with a KX2005XG-B chip (compatible with MONZA 4QT).