-
Hard tag HT072
€0.00HT072 is an RFID hard tag made of PEEK, a thermoplastic material with reduced wear sensitivity, as well as with high impact and high temperature resistance. Rectangular in shape, it measures 41 x 29 x 9 mm, weighs 15 grams and can be screwed through four holes with a diameter of 2.3 mm on metal surfaces.
Its physical characteristics allow it to support very high standards, reaching peak temperatures at:- 300°C for 100 hours;
- 280°C for 1000 hours;
- 260°C for 2000 hours;
In addition, HT072 is available in black, with UHF frequency - both European and US - and UCODE 8 chip. Therefore, due to these technical specifications, this RFID hard tag achieves large reading ranges: up to 6 metres with a fixed reader and up to 3.5 metres with a handheld device.
Both the printing and numbering of HT072 are done using laser technology. -
HT071 Hard tag
€0.00HT071 is an RFID hard tag made of nylon, a material which gives rigidity, compressive strength and dimensional stability. Rectangular in shape - measuring 78 x 21 x 11 mm - this robust RFID tag is designed to be applied to even narrow metal objects by screwing.Available in UHF frequency (both European and US) with the UCODE 8 chip, in black, it can be customised with a logo by pad printing and laser printing, while serialisation is done by laser technique. -
HT082 hard tags
€0.00HT082 is an RFID hard tag made of TPU, thermoplastic polyurethane, a non-toxic polymer featuring elasticity, flexibility, oil and abrasion resistance, as well as being water and gas proof.
With its distinctive funnel shape, HT082 is a tag for animals, thus for non-metal surfaces, comprising a ‘male’ part — 100 mm x 75 mm x 13 mm — and a ‘female’ part — ø 29 mm x 23 mm. These two components are attached to the ears of cattle on breeding farms by means of an interlocking device. In addition, the HT082 weighs 16 grams and covers large reading distances: up to 6 metres when read from a fixed device, and up to 3 metres when using a handheld reader. Available in UHF — both European and US frequencies — with the UCODE 8 chip, it comes in yellow, orange and blue. Finally, numbering can be applied using laser or inkjet technology. -
HT084 hard tags
€0.00HT084 is a ‘Seal tag’ — as it is typically used — made of nylon 66 (PA66), a plastic material resistant to impacts, wear and weather.
With its excellent abrasion resistance, flexibility and compactness, it is therefore ideal where durable, secure and fast application of cable tie tags are required for non-metal surfaces.
It measures 348 mm x 28 mm x 4 mm, weighs 6 grams and is available in three frequencies: LF, HF, UHF. Black or green, it can be customised with a logo using silkscreen printing, while numbering is applied using laser technology.
Toggle Nav
Search
Language
Products
Configure
