-
Hard tag HT072
€0.00HT072 is an RFID hard tag made of PEEK, a thermoplastic material with reduced wear sensitivity, as well as with high impact and high temperature resistance. Rectangular in shape, it measures 41 x 29 x 9 mm, weighs 15 grams and can be screwed through four holes with a diameter of 2.3 mm on metal surfaces.
Its physical characteristics allow it to support very high standards, reaching peak temperatures at:- 300°C for 100 hours;
- 280°C for 1000 hours;
- 260°C for 2000 hours;
In addition, HT072 is available in black, with UHF frequency - both European and US - and UCODE 8 chip. Therefore, due to these technical specifications, this RFID hard tag achieves large reading ranges: up to 6 metres with a fixed reader and up to 3.5 metres with a handheld device.
Both the printing and numbering of HT072 are done using laser technology. -
HP001 hard tags
€0.00HP001 is a flexible and ductile PVC hard tag. Round in shape, thin and lightweight — with a 15-mm diameter and 1-mm thickness, it weighs only 1 gram — HP001 can be easily glued onto metal and non-metal surfaces. It is available in white in HF with the MIFARE DESFIRE EV1 2K chip, and can be customised with logos using offset or pad printing, while serial numbering is applied using laser or inkjet printing.
-
HT059 hard tags
€0.00HT059 is a nylon ‘button tag’ — it resembles a button. Small and robust, it is resistant to impacts, chemicals, mould and bacteria.
Round in shape, it is exceptionally small, thin and lightweight, with a 10-mm diameter, 2.6-mm thickness and weight of 0.4 grams!
Designed for application on metal surfaces used in harsh environments, HT059 is either applied via an adhesive backing or embedded inside the item. Also available in black and in HF with the ICODE SLIX chip, it can be customised with application of a logo using pad or laser printing, while numbering can be applied using laser technology. -
HT071 Hard tag
€0.00HT071 is an RFID hard tag made of nylon, a material which gives rigidity, compressive strength and dimensional stability. Rectangular in shape - measuring 78 x 21 x 11 mm - this robust RFID tag is designed to be applied to even narrow metal objects by screwing.Available in UHF frequency (both European and US) with the UCODE 8 chip, in black, it can be customised with a logo by pad printing and laser printing, while serialisation is done by laser technique. -
HT085 hard tags
€0.00HT085 is a ‘sleeve tag’ or ‘tag anchored to objects using a cable tie’ made of PA6, an ultrasound-sealed nylon that provides good thermal protection and perfect resistance to impacts, pressure and other mechanical stresses. Rectangular in shape — 27 mm x 20.7 mm x 9.6 mm — and weighing 4.7 grams, this tag can be anchored to metal surfaces by means of plastic or metal cable ties. It is available in LF with the EM4200 chip, in HF with the ICODE SLIX and NTAG216 chips, and in UHF (European and US frequencies) with the HIGGS 3 chip. It is produced in red, yellow, green, blue, black. HT085 can be customised with a logo using silkscreen printing, while serial numbering is applied using laser technology.
Toggle Nav
Search
Language
Products
Configure
