-
HP001 hard tags
€0.00HP001 is a flexible and ductile PVC hard tag. Round in shape, thin and lightweight — with a 15-mm diameter and 1-mm thickness, it weighs only 1 gram — HP001 can be easily glued onto metal and non-metal surfaces. It is available in white in HF with the MIFARE DESFIRE EV1 2K chip, and can be customised with logos using offset or pad printing, while serial numbering is applied using laser or inkjet printing.
-
HT004 hard tags
€0.00HT004 is an RFID bin tag made of PA6 (nylon), a plastic material resistant to tensile stress and compression, wear, and weather. The resin coating is made of PUR or polyurethane, which features good resistance to water, salt and moisture.
Round in shape, the bin tag is designed for application on waste-collection bins. Its standard size — 30.5 mm in diameter — makes it easy to install and integrate into metal or plastic containers. The special screw structure prevents tampering and theft. HT004 can be customised with embossing and is available in LF — with SIC279 and EM4200 chips — in black and red, and in UHF, both European and US, with the HIGGS 3 chip, in black. -
HT017 Hard tag
€0.00HT017 is an RFID hard tag made of nylon, ultra light material fiber, which responds well to damage due to wear, traction, chemical agents, mold and bacteria. Designed to be incorporated into metal surfaces, its shape is cylindrical, it is ultra light - it weighs only 0.25 grams! - with a diameter of 6.8 mm and a height of 4 mm. Available in yellow, this tag is personalised through laserization. In addition, the HT017 hard tag is equipped with ICODE SLIX2 chip, with HF frequency, at 13.56 MHz.
-
HT018 hard tags
€0.00HT018 is an RFID hard tag made of nylon, a plastic material resistant to impacts and atmospheric agents. Designed for application on metal surfaces using screws, it is cylindrical in shape, very light and very small. With a diameter of 10 mm, it is 6 mm high and weighs just 0.33 grams. It is available in black, and can be customised using laser printing.
The HT018 hard tag is produced with the MB89R118 chip in HF. -
HT021 hard tags
€0.00HT021 is a ‘PCB tag’ comprising a printed circuit board (PCB) substrate, an insulating printed circuit board that connects several electronic components, protected by fibreglass. This layer is covered by thin metal applied via high-temperature rolling. Finally, the tag surface features a thin polycarbonate plate.
Round in shape, small in size and lightweight — with a diameter of just 7.9 mm, 0.9 mm in height and weighing 0.5 grams — HT021 is designed for application on metal objects requiring non-invasive tags. It can be affixed with an adhesive backing or via an insert moulding process, and is available in HF with the ICODE SLIX chip. -
HT022 hard tags
€0.00HT022 is an RFID hard tag made of PA9T nylon resin, a special polyphthalamide with outstanding properties in terms of dimensional stability, fluidity and thermal, chemical and abrasion resistance.
Round in shape, it has a slim but robust housing. With a 22-mm diameter, 3-mm thickness, and 3.1-mm central hole, HT022 is designed to withstand harsh conditions. It can be applied to metal, either using an adhesive backing or inserting a screw through the hole. Available in black in HF, with the ICODE SLIX chip, it can be customised with a logo using pad or laser printing. Numbering is applied using laser technology. -
HT059 hard tags
€0.00HT059 is a nylon ‘button tag’ — it resembles a button. Small and robust, it is resistant to impacts, chemicals, mould and bacteria.
Round in shape, it is exceptionally small, thin and lightweight, with a 10-mm diameter, 2.6-mm thickness and weight of 0.4 grams!
Designed for application on metal surfaces used in harsh environments, HT059 is either applied via an adhesive backing or embedded inside the item. Also available in black and in HF with the ICODE SLIX chip, it can be customised with application of a logo using pad or laser printing, while numbering can be applied using laser technology. -
HT066 hard tags
€0.00HT066 is an RFID hard tag made of ferrite, a ceramic-like material with very good magnetic and electrical insulation properties.
Rectangular in shape, HT066 is very small and light — measuring 4 mm x 2 mm x 2 mm and just 0.3 grams — it is designed for embedding in metal objects, thus enhancing their NFC technology. It is also designed to withstand harsh environments, tolerating temperatures up to 200°C and down to -60°C! This hard tag is available in HF with the ICODE SLIX chip and NFC technology. -
HT085 hard tags
€0.00HT085 is a ‘sleeve tag’ or ‘tag anchored to objects using a cable tie’ made of PA6, an ultrasound-sealed nylon that provides good thermal protection and perfect resistance to impacts, pressure and other mechanical stresses. Rectangular in shape — 27 mm x 20.7 mm x 9.6 mm — and weighing 4.7 grams, this tag can be anchored to metal surfaces by means of plastic or metal cable ties. It is available in LF with the EM4200 chip, in HF with the ICODE SLIX and NTAG216 chips, and in UHF (European and US frequencies) with the HIGGS 3 chip. It is produced in red, yellow, green, blue, black. HT085 can be customised with a logo using silkscreen printing, while serial numbering is applied using laser technology.
Toggle Nav
Search
Language
Products
Configure
