-
HT006 hard tags
€0.00HT006 is an RFID hard tag made of ABS, a thermoplastic material with very good mechanical properties, such as stiffness, hardness and impact and water resistance.
Rectangular in shape, this tag is specially designed for outdoor industrial asset management. It can be used on metal and non-metal surfaces. It measures 85 mm x 20 mm x 11 mm, and can be applied using rivets, screws or adhesive. Available in UHF, both European and US, it is manufactured with the HIGGS 9 chip. It has a large reading distance which, with the European frequency and on metal surfaces, can reach up to 6 metres. On non-metals it reaches up to 6.5 metres. When the tag with US frequency is applied to metals, it can be read up to a distance of 12 m, while on non-metals the reading distance can reach up to 7 m. Note that the tag reading depends on the reader, environment and application. It is also available in grey, and can be customised using laser technology. -
HT008 hard tags
€0.00HT008 is an RFID hard tag made of polycarbonate, a thermoplastic material featuring elevated heat and fire resistance, hardness and impact resistance, as well as good dimensional stability.
Suitable for harsh outdoor environments, it can only be applied to metal using screws or an adhesive backing. Rectangular in shape, it measures 130.4 mm x 42 mm x 10.3 mm. It is available in black, and can be customised using laser printing.
With the HIGGS 3 chip in UHF, it reaches very large reading distances: up to 18 metres with the European frequency and up to 30 metres with the US frequency! Reading depends on the reader, the environment and the application. -
HT017 Hard tag
€0.00HT017 is an RFID hard tag made of nylon, ultra light material fiber, which responds well to damage due to wear, traction, chemical agents, mold and bacteria. Designed to be incorporated into metal surfaces, its shape is cylindrical, it is ultra light - it weighs only 0.25 grams! - with a diameter of 6.8 mm and a height of 4 mm. Available in yellow, this tag is personalised through laserization. In addition, the HT017 hard tag is equipped with ICODE SLIX2 chip, with HF frequency, at 13.56 MHz.
-
HT018 hard tags
€0.00HT018 is an RFID hard tag made of nylon, a plastic material resistant to impacts and atmospheric agents. Designed for application on metal surfaces using screws, it is cylindrical in shape, very light and very small. With a diameter of 10 mm, it is 6 mm high and weighs just 0.33 grams. It is available in black, and can be customised using laser printing.
The HT018 hard tag is produced with the MB89R118 chip in HF. -
HT022 hard tags
€0.00HT022 is an RFID hard tag made of PA9T nylon resin, a special polyphthalamide with outstanding properties in terms of dimensional stability, fluidity and thermal, chemical and abrasion resistance.
Round in shape, it has a slim but robust housing. With a 22-mm diameter, 3-mm thickness, and 3.1-mm central hole, HT022 is designed to withstand harsh conditions. It can be applied to metal, either using an adhesive backing or inserting a screw through the hole. Available in black in HF, with the ICODE SLIX chip, it can be customised with a logo using pad or laser printing. Numbering is applied using laser technology. -
HT034 hard tags
€0.00HT034 is an RFID hard tag made of a state-of-the-art engineering plastic that is resistant to chemicals and very high temperatures.
Square in shape, this tag measures 26.24 mm x 26.24 mm x 5.40 mm and weighs 6 grams. Its special design makes it ideal for application on metal surfaces in industrial settings exposed to extreme heat, reaching a maximum of 220°C!
Available in dark grey and in UHF — both European and US frequencies — with the HIGGS 3 chip, HT034 can be read up to a distance of 2.5 metres. Customisation with either a logo or numbering can be carried out using laser technology. -
HT058 hard tags
€0.00HT058 is an RFID hard tag made of TPV (thermoplastic vulcanisate), an elastomer combining the advantages of thermoplastic materials with those of rubber. It retains good dimensional stability at high temperatures and is resistant to tensile stress and breakage, UV aging, ozone and weather. Rectangular in shape, it measures 83 mm x 26 mm x 2.6 mm and weighs 5 grams. With its flexibility, HT058 perfectly adapts to irregular and curved surfaces, and can be attached to metal and non-metal objects using the holes provided and a Panduit cable tie. This application prevents tampering. Available in yellow, in both European and US UHF with the MONZA 4QT chip, it offers a large reading distance of up to 9 metres. It can be customised with a logo or barcode engraving, which can be applied using pad or laser printing. Numbering is applied using laser technology.
-
HT059 hard tags
€0.00HT059 is a nylon ‘button tag’ — it resembles a button. Small and robust, it is resistant to impacts, chemicals, mould and bacteria.
Round in shape, it is exceptionally small, thin and lightweight, with a 10-mm diameter, 2.6-mm thickness and weight of 0.4 grams!
Designed for application on metal surfaces used in harsh environments, HT059 is either applied via an adhesive backing or embedded inside the item. Also available in black and in HF with the ICODE SLIX chip, it can be customised with application of a logo using pad or laser printing, while numbering can be applied using laser technology. -
HT060 hard tags
€0.00HT060 is an RFID hard tag made of FR4 (flame resistant), a material made of fibreglass with an epoxy resin matrix, which makes it flame retardant. It has a high electrical resistance and very low degree of moisture absorption.
Round in shape, it is available in two sizes — a 5- or 6-mm diameter, a thickness of 4 mm and a central hole of 2 mm — and is very light, weighing just 0.5 grams. Available in black and yellow, it can be either screwed or glued onto the surface or in the cavities of metal objects. It is produced in European and US UHF, with the HIGGS 3 chip. -
HT061 hard tags
€0.00HT061 is an RFID hard tag made of FR4 (flame resistant), a material consisting essentially of fibreglass and a flame-retardant epoxy resin. With high electrical resistance, this material absorbs very little moisture. It is also resistant to acids and alkaline substances.
Rectangular in shape, it measures 95 mm x 25 mm x 4 mm and weighs 15 grams. It is designed for application on metal surfaces by means of adhesive backing or screws using the two 4-mm diameter holes on the sides. It is resistant to very low temperatures — down to -60°C — and even very high temperatures reaching 230°C! Black or white in colour, HT061 is available with European and US UHF with the MONZA 4QT chip, and can be customised with a logo using pad or laser printing, while numbering can only be applied using laser technology. -
HT064 hard tags
€0.00HT064 is a nylon RFID hard tag resistant to impacts, tensile stress and chemicals. Rectangular in shape — measuring 52 mm x 23 mm x 5.5 mm and weighing 11 grams — this robust RFID tag guarantees optimised reading performance in metal-dense environments. It is resistant to very high temperatures, with a maximum temperature of +200°C for one hour. HT064 is particularly designed to be read on the back of metal objects, which the tag can be affixed to using adhesive backing or screws, offering an alternative to readings from the front. It is available in yellow in UHF (European and US frequencies) with the MONZA R6P chip, and can be customised with a logo using pad or laser printing. Numbering is applied using laser technology.
-
HT069 hard tags
€0.00HT069 is an RFID hard tag made of PPS, a thermoplastic polymer with excellent resistance to chemicals, mechanical stress and high temperatures.
Rectangular in shape, it weighs 8 grams and measures 60.20 mm x 19.15 mm x 5.27 mm. Suitable for application on metal by means of adhesive backing or screws, it features high resistance to heat, withstanding up to 230°C during operation!
Available in European and US UHF with a HIGGS 4 chip, its reading distance reaches 6.5 metres. Black in colour, it can be customised using laser or pad printing, while numbering is applied using laser technology. -
HT085 hard tags
€0.00HT085 is a ‘sleeve tag’ or ‘tag anchored to objects using a cable tie’ made of PA6, an ultrasound-sealed nylon that provides good thermal protection and perfect resistance to impacts, pressure and other mechanical stresses. Rectangular in shape — 27 mm x 20.7 mm x 9.6 mm — and weighing 4.7 grams, this tag can be anchored to metal surfaces by means of plastic or metal cable ties. It is available in LF with the EM4200 chip, in HF with the ICODE SLIX and NTAG216 chips, and in UHF (European and US frequencies) with the HIGGS 3 chip. It is produced in red, yellow, green, blue, black. HT085 can be customised with a logo using silkscreen printing, while serial numbering is applied using laser technology.
Toggle Nav
Search
Language
Products
Configure
