-
HT017 Hard tag
€0.00HT017 is an RFID hard tag made of nylon, ultra light material fiber, which responds well to damage due to wear, traction, chemical agents, mold and bacteria. Designed to be incorporated into metal surfaces, its shape is cylindrical, it is ultra light - it weighs only 0.25 grams! - with a diameter of 6.8 mm and a height of 4 mm. Available in yellow, this tag is personalised through laserization. In addition, the HT017 hard tag is equipped with ICODE SLIX2 chip, with HF frequency, at 13.56 MHz.
-
HT018 hard tags
€0.00HT018 is an RFID hard tag made of nylon, a plastic material resistant to impacts and atmospheric agents. Designed for application on metal surfaces using screws, it is cylindrical in shape, very light and very small. With a diameter of 10 mm, it is 6 mm high and weighs just 0.33 grams. It is available in black, and can be customised using laser printing.
The HT018 hard tag is produced with the MB89R118 chip in HF. -
HT066 hard tags
€0.00HT066 is an RFID hard tag made of ferrite, a ceramic-like material with very good magnetic and electrical insulation properties.
Rectangular in shape, HT066 is very small and light — measuring 4 mm x 2 mm x 2 mm and just 0.3 grams — it is designed for embedding in metal objects, thus enhancing their NFC technology. It is also designed to withstand harsh environments, tolerating temperatures up to 200°C and down to -60°C! This hard tag is available in HF with the ICODE SLIX chip and NFC technology. -
HT085 hard tags
€0.00HT085 is a ‘sleeve tag’ or ‘tag anchored to objects using a cable tie’ made of PA6, an ultrasound-sealed nylon that provides good thermal protection and perfect resistance to impacts, pressure and other mechanical stresses. Rectangular in shape — 27 mm x 20.7 mm x 9.6 mm — and weighing 4.7 grams, this tag can be anchored to metal surfaces by means of plastic or metal cable ties. It is available in LF with the EM4200 chip, in HF with the ICODE SLIX and NTAG216 chips, and in UHF (European and US frequencies) with the HIGGS 3 chip. It is produced in red, yellow, green, blue, black. HT085 can be customised with a logo using silkscreen printing, while serial numbering is applied using laser technology.
-
LB022 RFID label
€0.00LB022 is an adhesive RFID label made of coated paper.
Rectangular in shape, it measures 60 mm x 32 mm and features a high temperature resistance, high solvent resistance, high viscosity relative to HSE parameters, and low styrene emissions (LSE).
LB022 can be applied to all metal and non-metal surfaces by means of an adhesive backing.
This label can be customised using offset or inkjet technology for colour or black-and-white prints, and thermographic printing for black-and-white prints. It is white and operates in HF with a NTAG213 chip, an NFC Forum Type 2 technology.
Toggle Nav
Search
Language
Products
Configure
