-
HP096 hard tags
€0.00HP096 is a hard tag made of PVC, a flexible and ductile thermoplastic with elevated resistance to high and low temperatures. Rectangular in shape, it measures 100 mm x 24.5 mm x 1.5 mm and weighs 5 grams. It can be applied to non-metal surfaces and to metal surfaces on request. It is equipped with two holes for anchoring to objects using screws. White in colour and available in LF, HF and UHF, it can be customised with a logo using offset or pad printing, while numbering can be applied using laser or inkjet technology.
-
HT016 Hard tag
€0.00HT016 is an RFID hard tag made of 90% PCB, resistant to extremely high temperatures.
Square in shape, this tag measures 6.7 x 6.7 x 0.75 mm and weighs 0.4 grams. It can be applied by adhesive and embedded inside plastics.
It is suitable for the identification - also with NFC readers - of medical devices and instruments that need to be sterilised at high temperatures.
In fact, it peaks at 250°C for 24 hours! It is a two-colour tag - blue and black - in HF frequency with the ICODE SLIX and ST25TB02K chips.
Both logo customisation and numbering can be carried out using laser technology. -
HT065 hard tags
€0.00HT065 is an RFID hard tag made of ferrite, a ceramic-like material with excellent magnetic and electrical insulation properties. With such features, this material is used in electrical engineering, radio technology and electronics.
Rectangular in shape, HT065 is small and compact, and it is designed for embedding in non-metal objects, thus enhancing their NFC capabilities. It is also designed to withstand extreme conditions, so it is resistant to high temperatures of up to 200°C and low temperatures down to -60°C! Tiny and very light — measuring 4.9 mm x 3 mm x 2.5 mm in just 0.5 grams — it is available in HF with the ICODE SLIX chip and NFC technology. -
HT066 hard tags
€0.00HT066 is an RFID hard tag made of ferrite, a ceramic-like material with very good magnetic and electrical insulation properties.
Rectangular in shape, HT066 is very small and light — measuring 4 mm x 2 mm x 2 mm and just 0.3 grams — it is designed for embedding in metal objects, thus enhancing their NFC technology. It is also designed to withstand harsh environments, tolerating temperatures up to 200°C and down to -60°C! This hard tag is available in HF with the ICODE SLIX chip and NFC technology. -
HT083 hard tags
€0.00HT083 is a cable tie tag made of PA66, a nylon featuring hardness, rigidity and resistance to wear, heat and abrasion. It measures 198.5 mm x 9 mm x 8 mm and weighs 2 grams. With to its special cable tie shape, it can be firmly anchored to objects for identification purposes. Designed for application on non-metal surfaces, HT083 is available in black in HF with the ICODE SLIX and NTAG213 chips. Printing and serial numbering can be applied using laser technology.
-
HT084 hard tags
€0.00HT084 is a ‘Seal tag’ — as it is typically used — made of nylon 66 (PA66), a plastic material resistant to impacts, wear and weather.
With its excellent abrasion resistance, flexibility and compactness, it is therefore ideal where durable, secure and fast application of cable tie tags are required for non-metal surfaces.
It measures 348 mm x 28 mm x 4 mm, weighs 6 grams and is available in three frequencies: LF, HF, UHF. Black or green, it can be customised with a logo using silkscreen printing, while numbering is applied using laser technology. -
HT085 hard tags
€0.00HT085 is a ‘sleeve tag’ or ‘tag anchored to objects using a cable tie’ made of PA6, an ultrasound-sealed nylon that provides good thermal protection and perfect resistance to impacts, pressure and other mechanical stresses. Rectangular in shape — 27 mm x 20.7 mm x 9.6 mm — and weighing 4.7 grams, this tag can be anchored to metal surfaces by means of plastic or metal cable ties. It is available in LF with the EM4200 chip, in HF with the ICODE SLIX and NTAG216 chips, and in UHF (European and US frequencies) with the HIGGS 3 chip. It is produced in red, yellow, green, blue, black. HT085 can be customised with a logo using silkscreen printing, while serial numbering is applied using laser technology.
-
LB002 RFID label
€0.00LB002 is a flexible and adhesive paper RFID label. Rectangular in shape, it measures 40 mm x 19.5 mm x 0.25 mm and can be applied to non-metal surfaces. Printing and serial numbering are applied using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. LB002 is available in white and in HF, with the ICODE SLIX chip.
-
LB008 RFID label
€0.00LB008 is a flexible and adhesive paper RFID label. Rectangular in shape, it measures 85 mm x 54 mm x 0.43 mm and can be applied to non-metal surfaces. Printing and serial numbering are applied using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. White in colour, it is available in HF with the MIFARE CLASSIC 1K EV1 S50 chip.
-
LB017 RFID label
€0.00LB017 is a flexible and adhesive paper RFID label.
Rectangular in shape, it measures 20 mm x 10 mm. Ideal for all types of non-metal surfaces, it can be customised using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints only. LB017 is available in white and in HF with the FM11RF08 chip, which can be read up to a distance of 5 cm. -
LB022 RFID label
€0.00LB022 is an adhesive RFID label made of coated paper.
Rectangular in shape, it measures 60 mm x 32 mm and features a high temperature resistance, high solvent resistance, high viscosity relative to HSE parameters, and low styrene emissions (LSE).
LB022 can be applied to all metal and non-metal surfaces by means of an adhesive backing.
This label can be customised using offset or inkjet technology for colour or black-and-white prints, and thermographic printing for black-and-white prints. It is white and operates in HF with a NTAG213 chip, an NFC Forum Type 2 technology. -
LB031 RFID label
€0.00LB031 is a square RFID tag made of coated paper. It measures 25 x 25 mm and can be applied by adhesive to non-metallic surfaces.
Printing and numbering is done by offset and inkjet for colour or black-and-white prints, and by thermography for black-and-white only.
LB031 is a white NFC tag, with HF frequency and NTAG213 chip. -
WT006 RFID wet inlay
€0.00WT006 is a wet inlay made of PET, a flexible thermoplastic material that is resistant to cutting and thermal shock.
Rectangular in shape, it measures 86 x 46 mm and has an inlay of 75 x 45 mm. Transparent in colour, it can be applied to non-metallic surfaces by means of adhesive.
This wet inlay is an NFC tag available in the HF frequency, with the ICODE SLIX chip.
Toggle Nav
Search
Language
Products
Configure
