Products

ATA5577 cards, or T5567 cards, are contactless RFID cards operating in low frequency, 125 kHz. The data transmission mode of these cards is read/write.

ATA5577 or T5567 cards have a password-protected memory of 36 bytes and a unique identifier (UID). Furthermore, when programmed, the card memory becomes read-only.

They are used for access control and identification at hotels and hospitality facilities, companies, schools and universities; attendance control at companies; and in waste management for opening access-controlled bins using RFID cards.

ATA5577 or T5567 cards are available in three different materials (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood. 

CL001 is a ‘clear disk’ tag, a special disc-shaped RFID tag consisting of a laminate or PVC layer enclosed between two transparent PET sheets. The CL001 hard tag is a semi-finished product that provides basic protection against mechanical damage. With its small size, minimal weight — it has a diameter of 20 mm, a thickness of 0.5 mm and weighs just 0.16 grams — and special design, it is ideal for embedding in a wide range of non-metal surfaces, and can be applied quickly and easily using the convenient adhesive film. Transparent and available in LF and HF, it can be customised with a logo using offset and silkscreen printing, while serial numbering can be applied using inkjet technology. 

CL002 is, a ‘clear disk’ tag, a special disc-shaped hard tag consisting of a laminate or PVC layer sandwiched between two transparent PET sheets. Semi-finished, CL002 offers basic protection against mechanical damage. Large and thin — with a diameter of 144.7 mm, 1-mm thickness and weighing 4.6 grams — its special design fits in with a wide range of non-metal surfaces, with easy application by means of the special adhesive film. Transparent, it is available in LF and HF, and can be customised with a logo using offset and silkscreen printing, while numbering is applied using inkjet technology.

EM4100 cards are contactless RFID cards operating in LF at 125 kHz. They have read-only memory and a unique identifier (UID).

EM4100 read-only cards are widely used for access control and identification at hotels and hospitality facilities, companies, schools and universities.

Available in different materials — PVC, PETG, wood — they come in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

EM4102 cards operate at a low frequency, 125 kHz. These are contactless RFID cards equipped with a read-only memory, and unique identifier (UID).

EM4102 read-only cards are among the most widely used for personal identification and access control in the hospitality sector, at companies, schools and universities, and for attendance at companies.

They are available in PVC, PETG and wood, with the following dimensions: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

EM4200 cards are contactless RFID cards operating at a low frequency of 125 kHz. They have read-only memory and a unique identifier (UID).

EM4200 read-only badges offer high performance in several applications, such as access control and identification at hotels and campsites; waste management (opening of access-controlled bins using RFID cards); loyalty programmes; and as electronic wallets for payments at laundromats, vending machines and self-service car washes. 

EM4200 cards are available in three different materials (PVC, PETG and wood), in the following dimensions: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

EM4305 cards are contactless RFID cards operating in the low-frequency band at 125 kHz. They transmit data in read/write mode, have a 64-byte memory and a unique identifier (UID). The memory is password-protected in read/write operations.

EM4305 cards are used for access control and identification in the hospitality industry, corporate and educational settings, and also in the waste-management sector for opening access-controlled bins using RFID cards.

They are available in three different materials (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

EM4550 cards, or TITAN cards, are contactless RFID cards operating in LF at 125 kHz. Equipped with read/write data transmission modes, they contain 1 kilobit of EEPROM memory, which can be password protected, and a UID (unique identifier). 

They are used for various applications such as ticketing, identification and access control at hospitality facilities and companies, loyalty programmes and as virtual wallets for self-service machines (car washes, vending machines, laundromats).

EM4550 cards are available in PVC, PETG and wood, in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

GT001 is a ‘glass tag’ made of biocompatible glass, a transparent, chemically stable and versatile material. Cylindrical in shape,  it measures 3.85 mm x 32 mm. It is uniquely designed for the needs of any contactless RFID application in pet, farm and laboratory animal management. This glass tag can be applied via ingestion — it is housed inside a ceramic envelope that is easily ingested by animals — or embedded into rings tied to the legs of birds, or even injected into the ear lobe. This highly durable tag protects the electronic components from exposure to aggressive chemicals, ensuring high readability and excellent stability at variable temperatures. Transparent in colour, it is available in LF with the SIC279 chip (HDX compatible), and can be customised using laser technology.

GT002 is a ‘glass tag’, thus made of glass, a transparent, chemically stable and versatile material. Cylindrical in shape, it is available in two sizes: ø 2.12 mm x 12 mm and ø 3 mm x 13 mm. This small size allows the tag to be easily embedded in any surface, whether metal or non-metal (plastic, wood, paper, water). Furthermore, the high resistance of glass protects the electronic components from exposure to aggressive chemicals, ensuring that readability remains unaffected even when immersed in liquids, and providing excellent stability at variable temperatures. Transparent in colour, GT002 is available in LF with the EM4200 chip, and can be customised using laser technology.

GT003 is a ‘glass tag’, thus made of glass, a transparent material with a stable and versatile chemical structure. Cylinder-shaped, it measures ø 4 mm x 32 mm. This tag can be embedded in non-metal surfaces. The GT003 glass tag is a ferrite-based transponder embedded in an industrial glass vial, which safely protects it from exposure to chemicals and high temperatures. Transparent, it is available in LF with the SIC279 chip, and it can be customised using laser technology.

Hitag1 cards are low-frequency contactless RFID cards operating at 125 kHz. They transmit data in read/write mode and have a memory of 2 kbits, or 256 bytes. 

The memory is equipped with a selective content protection feature. In addition, a smart anti-collision algorithm allows several cards to be used simultaneously in the same magnetic field.

Hitag1 cards are used for various applications, such as access control, virtual wallets for self-service and vending machines and attendance control. 

They are available in three materials (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

Hitag2 cards are contactless cards operating at a low frequency, 125 kHz. The data transmission mode is read/write.

These RFID cards have a memory of 32 bytes. Moreover, the memory has a selective content protection feature.

Hitag2 badges are suitable for multiple applications, such as identifying people and access control at hospitality facilities, offices, universities and schools; as electronic wallets for self-service and vending machines; and attendance control at companies. 

They are available in three different materials (PVC, PETG and wood), in the following dimensions: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

HitagS cards are contactless RFID cards operating in the LF band at 125 kHz. They have a read/write data transmission mode. In addition, they are equipped with a smart anti-collision feature, which allows several cards to be used simultaneously in the same field without interference. 

The memory of these cards has a lock function, which enhances data protection.

HitagS cards are used for applications in several areas, such as access control and identification; attendance control; loyalty cards and programmes; virtual wallets for self-service machines; and waste management, specifically the use of RFID cards to open access-controlled bins.

They are available in PVC, PETG and wood, in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood. The following types of HitagS chips are available: HitagS 256, HitagS 2048.

HP037 is a hard tag made of PVC, a flexible and ductile thermoplastic material that is resistant to high and low temperatures. Round in shape, it has an external diameter of 146 mm and an internal diameter of 100 mm, with a 1.1-mm thickness. It can be glued onto non-metal surfaces and, on request, to metal surfaces. Available in white in LF and HF, it can be customised with a logo using offset or pad printing, while numbering can be applied using laser or inkjet technology. 

HP096 is a hard tag made of PVC, a flexible and ductile thermoplastic with elevated resistance to high and low temperatures. Rectangular in shape, it measures 100 mm x 24.5 mm x 1.5 mm and weighs 5 grams. It can be applied to non-metal surfaces and to metal surfaces on request. It is equipped with two holes for anchoring to objects using screws. White in colour and available in LF, HF and UHF, it can be customised with a logo using offset or pad printing, while numbering can be applied using laser or inkjet technology.

HT001 is an RFID hard tag made of PPA (polyphthalamide), a thermoplastic material with a high resistance to chemicals, moisture and very high temperatures. It also possesses good mechanical properties, which ensure excellent dimensional stability and high resistance to breakage and deformation. With its IP69 rating, HT001 is resistant to both water and dust.
The hole is used to apply the tag to non-metal surfaces using a screw or with adhesive backing.
Round in shape, it has a 50-mm diameter and can be customised using silkscreen printing and pad printing, while serial numbering can be applied using laser technology. It is black and available in LF with the EM4200 chip and in HF with the ICODE SLIX2 chip.

HT004 is an RFID bin tag made of PA6 (nylon), a plastic material resistant to tensile stress and compression, wear, and weather. The resin coating is made of PUR or polyurethane, which features good resistance to water, salt and moisture. 
Round in shape, the bin tag is designed for application on waste-collection bins. Its standard size — 30.5 mm in diameter — makes it easy to install and integrate into plastic containers. The special screw structure prevents tampering and theft. HT004 can be customised with embossing and is available in LF — with SIC279 and EM4200 chips — in black and red, and in UHF, both European and US, with the HIGGS 3 chip, in black.

HT007 is an RFID hard tag made of ABS, a thermoplastic material that has a high resistance to chemicals, moisture and very high temperatures. It also possesses good mechanical properties, which ensure excellent dimensional stability and high resistance to breakage and deformation. With its IP69 rating, HT007 is resistant to water and dust. The 3 mm hole is used for application on non-metal surfaces using screws or an adhesive backing. Round in shape, it has a 30-mm diameter and can be customised using silkscreen printing and pad printing, while serial numbering can be applied using laser technology. It is available in black in LF with the EM4200 chip and in HF with the ICODE SLIX2 chip.

HT019 is an RFID hard tag made of epoxy resin, a thermosetting polymer that is resistant to liquids, impacts and abrasion, extreme temperatures, weather and acids. Compliant with standard RFID readers and modules, it is ATEX certified for safe use in potentially explosive environments.
Round in shape and small in size and weight — it weighs 1 gram with a 16-mm diameter and 3-mm height! — this tag can be discreetly applied — sewn, embedded or glued — to non-metal surfaces. It is black, available in LF with the EM4200 chip and can be customised with a logo using pad printing.

HT084 is a ‘Seal tag’ — as it is typically used — made of nylon 66 (PA66), a plastic material resistant to impacts, wear and weather. 
With its excellent abrasion resistance, flexibility and compactness, it is therefore ideal where durable, secure and fast application of cable tie tags are required for non-metal surfaces.
It measures 348 mm x 28 mm x 4 mm, weighs 6 grams and is available in three frequencies: LF, HF, UHF. Black or green, it can be customised with a logo using silkscreen printing, while numbering is applied using laser technology.

HT085 is a ‘sleeve tag’ or ‘tag anchored to objects using a cable tie’ made of PA6, an ultrasound-sealed nylon that provides good thermal protection and perfect resistance to impacts, pressure and other mechanical stresses. Rectangular in shape — 27 mm x 20.7 mm x 9.6 mm — and weighing 4.7 grams, this tag can be anchored to metal surfaces by means of plastic or metal cable ties. It is available in LF with the EM4200 chip, in HF with the ICODE SLIX and NTAG216 chips, and in UHF (European and US frequencies) with the HIGGS 3 chip. It is produced in red, yellow, green, blue, black. HT085 can be customised with a logo using silkscreen printing, while serial numbering is applied using laser technology.

HT090 is a ‘button tag’ made of nylon, a plastic resistant to impacts, wear and weather that is industrially hardened via overmoulding.
Round in shape, this small, lightweight ‘button tag’ — 12.4 mm by 2 mm and only 0.3 grams! — is designed for tracking small objects or for incorporation using an adhesive backing in confined spaces within items to be identified. Suitable for application on non-metal materials, it is available in LF with the EM4200 chip and comes in black. In addition, it can be customised with logos using pad or laser printing, while numbering is only applied using laser technology.

Q5 cards or 5555 cards are LF-band contactless RFID cards operating at 125 kHz. The data transmission mode is read/write.  They have a 33-byte memory and UID (unique identifier). In particular, the memory can be programmed to be read-only. The mode of operation is by password or direct access. Applications of the Q5 or 5555 cards include access control and identification at hotels, campsites and hospitality facilities, companies, schools and universities, as well as attendance control at companies. Q5 or 5555 cards are available in three types of material (PVC, PETG and wood), measuring 86 mm x 54 mm x 0.86 mm (PVC and PETG) and 86 mm x 54 mm x 1.3 mm (wood).

HP034 is an RFID key fob made of PVC, a ductile thermoplastic material resistant to both very high and low temperatures. Designed with a hole for a string and a distinctive teardrop shape, the entire surface can be customised using offset and pad printing, while serial numbering can be applied using laser and inkjet techniques. HP034 is available in LF, HF and combo (LF+HF) frequencies and comes in white.

HP035 is an RFID key fob made of PVC, whose thermoplastic properties ensure good resistance to very high and low temperatures. It features two rectangular holes to easily insert a ribbon or string. It is rectangular in shape with rounded edges. The entire surface can be customised using offset and pad printing techniques. Serial numbering can be applied using laser or inkjet printing. HP035 can be ordered in LF, HF and combo (LF+HF) frequencies and comes in white.

HP038 is an RFID key fob made of PVC, a ductile thermoplastic material with high resistance to very high and low temperatures. Designed with a hole for a string, it is rectangular in shape and the entire surface can be customised using offset or pad printing and epoxy printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies and comes in white.

HP039 is an RFID key fob made of PVC, a thermoplastic material distinguished by its elasticity and resistance to very low and very high temperatures. 
Rectangular in shape, it has a lanyard hole and can be customised over the entire surface using offset, pad printing and epoxy printing techniques. While serialisation is possible with laser and inkjet.
It is available in white, LF, HF and combo (LF+HF) frequencies.

KF001 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties such as good rigidity and hardness, resistance to high and low temperatures, impacts and scratches. KF001 features a teardrop design and a double metal hook-and-loop fastener for dual attachment. It can be customised using silkscreen printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF (with a EM4200, ATA5577 or T5567, EM4550 or TITAN chip) and HF (with the MIFARE CLASSIC 1K EV1 S50 chip) in the following colours: grey, yellow, red, green, purple and blue.

KF002 is an RFID key fob made of ABS, a thermoplastic material featuring good rigidity, high and low temperature resistance, impact resistance and water resistance. It shows refined workmanship on both the front and back.
With a metal ring clasp and teardrop design, KF002 can be customised with silkscreen and pad printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies, and in the following colours: blue, black, green, grey, yellow, red and white. 

KF003 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties such as good rigidity and hardness, impact resistance and water resistance. With a metal ring and teardrop shape, it is available in two options, one more resistant to high temperatures (-T) and the other less resistant (-R). It can be customised using screen and pad printing, while serial numbering can be applied using laser technology. KF003 is available in LF, HF and combo (LF+HF) frequencies, in the following colours: blue, black, green, grey, yellow, red and orange. It can also be ordered in combinations with a white cover and housing in black, red, yellow, green or blue.

KF007 is an RFID key fob made of PA6, a nylon with excellent mechanical properties, which is resistant to traction and compression, wear and atmospheric agents. With its characteristic teardrop shape and smooth surface, this keyfob has a hole for inserting a lanyard.

KF007 can be personalised using pad printing, while serial numbering can be applied using laser, inkjet and UV inkjet technologies. It is available in LF, HF, UHF and combined LF+HF and HF+UHF frequencies, in ten colours: red, orange, yellow, green, blue, navy blue, purple, white, grey, black.

KF008 is an RFID key fob made of PA6 (nylon), a plastic material with excellent mechanical properties. Resistant to tensile stress and compression, it is also wear-resistant and weatherproof. Teardrop-shaped and featuring a lanyard hole, it can be customised using silkscreen printing, while serial numbering can be applied using laser and inkjet technology. KF008 is available in LF, HF and combined (LF+HF) frequencies and in the following colours: black, white, red, blue, green, yellow and orange.

KF010 is an RFID key fob with an ABS housing and stainless steel frame, which makes it rigid and durable, resistant to both water and high temperatures.Featuring a refined rounded shape, it has a ring built into the body of the key fob, and can be customised using silkscreen and pad printing. serial numbering can be applied using laser and inkjet technology. It is available in LF, HF and combo (LF+HF) frequencies, in the following colours: black, white and blue.

KF012 is an RFID key fob made of PVC, a flexible and ductile thermoplastic material with high resistance to very high and low temperatures. Designed with a hole for a string, it is rectangular and the entire surface can be customised using offset and pad printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies and comes in white.

KF013 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties, such as good rigidity and hardness, impact resistance and water resistance. Designed with a hole for a string, it has a fresh and lively teardrop design enhanced by bright, attractive colours in the following combinations: black and white, white and grey, white and blue, white and purple, white and red, white and orange, white and pink, white and green, white and yellow. In addition, KF013 can be customised using inkjet printing, and serial numbering can be applied using laser technology. It is available in LF (chip: ATA5577 or T5567, EM4200) and HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE DESFIRE EV2 2K/4K/8K).

KF014 is an RFID key fob made of nylon and metal, materials that withstand high and low temperatures, chemicals and mechanical stress. Rectangular in shape, with a ring closure, it combines the robustness of the upper metal housing with the elegance of the matt texture. It can be customised using pad printing, while serial numbering can be applied using laser technology. RFID key fob KF014 is available in colours: white, black, grey, red, dark blue, light blue, purple. It works at LF (chips: EM4200, EM4550 or TITAN, ATA5577 or T5567, HITAG2), HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE CLASSIC 4K EV1 S70,  MIFARE DESFIRE EV2 4K, MIFARE DESFIRE EV3 2K/4K/8K, MIM1024/PRIME, NTAG213) and COMBO LF+HF (chips: MIFARE CLASSIC 1K EV1 S50 + EM4200, MIFARE CLASSIC 1K EV1 S50 + T5567, MIFARE DESFIRE 4K/8K EV3 + EM4200, MIFARE DESFIRE 4K EV3 + ATA5577) frequencies.

WB001 is a unisex RFID wristband with a nylon strap and adjustable adhesive Velcro fastener with plastic loop. It features a PVC dial and ABS case. The white dial with black case can be customised using silkscreen printing, while serial numbering can be applied using laser or inkjet techniques. The strap comes in three colours: yellow/black, red/black and blue/black. The wristbands are available in LF, HF and UHF.

WB002 is an RFID wristband for women, entirely Made in Italy using polyurethane, a material resistant to water, salt and moisture. Featuring an open cuff, the dial of this wristband is white and can be customised using offset and resin printing, while serial numbering can be applied using laser or inkjet technology. These wristbands are available in LF (EM4200, ATA5577 or T5567, EM4550 or TITAN, HITAG2, HITAG S 2048, HITAG S 256) and HF (MIFARE CLASSIC 1K EV1 S50, MIFARE CLASSIC 4K EV1 S70, MIFARE ULTRALIGHT EV1-1, MIFARE ULTRALIGHT EV1-2, MIFARE ULTRALIGHT C, TAG-IT 256, TAG-IT 2K), and in the following colours: black, blue, pink and yellow. 

WB003 is an RFID wristband for men entirely Made in Italy using polyurethane, a material resistant to water, salt and moisture. Featuring an open cuff, the dial of this wristband is white and can be customised using offset and resin printing, while serial numbering can be applied using laser or inkjet technology. The wristband is available in LF (EM4200, ATA5577 or T5567, EM4550 or TITAN, HITAG1, HITAG2, HITAG S 2048, HITAG S 256) and HF (MIFARE CLASSIC 1K EV1 S50, MIFARE CLASSIC 4K EV1 S70, MIFARE ULTRALIGHT EV1-1, MIFARE ULTRALIGHT EV1-2, MIFARE ULTRALIGHT C, TAG-IT 256, TAG-IT 2K), and in the following colours: black, blue, pink and yellow.

WB004 is a unisex RFID wristband made of silicone, a flexible, waterproof material that retains its elasticity even at very low temperatures, with good resistance to higher temperatures and weathering. Available in two sizes, it has a fixed clasp. The dial and strap can be customised using pad printing, while serial numbering can be applied using laser technology. The wristband is available in LF, HF and UHF, in the following colours: red, green, light blue, dark blue and black.

WB005 is a unisex RFID wristband made of silicone, a flexible, waterproof material that retains its elasticity even at low temperatures, with good resistance to high temperatures and weathering. Available in three sizes, it has a fixed clasp. The dial and strap can be customised using pad printing, while serial numbering can be applied using laser technology. The wristband is available in LF (chips: EM4200, ATA5577 or T5567) and HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE CLASSIC 4K EV1 S70, MIFARE ULTRALIGHT EV1-1, MIFARE ULTRALIGHT C, NTAG213), in the following colours: black, blue, orange, yellow, red, grey.

WB006 is a unisex wristband, Made in Italy using PVC, a versatile material give its resistance to water, wear, chemicals, fungi and bacteria.
Equipped with a tear-proof, non-allergenic metal snap fastener, special microwave welding and sweat-proof knurling, this wristband is designed for heightened comfort.
The dial and strap can be customised using pad printing, while serial numbering can be applied using laser technology. WB006 is available in LF with the EM4200  chip and in HF with the MIFARE CLASSIC 1K EV1 S50 chip. It comes in red, orange, yellow, green, light blue, blue, purple (strap) and black (dial).

WB007 is a unisex RFID wristband made of silicone, a flexible, waterproof material that retains its elasticity even at very low temperatures, with good resistance to higher temperatures. Ergonomic and easy to wear, with adjustable clasp. The dial and strap can be customised using silkscreen printing, while serial numbering can be applied using laser technology.  WB007 is available in both LF and HF, in the following colours: red, yellow, green, blue and others on request.

WB010 is a unisex RFID wristband with a nylon strap and adjustable Velcro fastener. The dial is made of a printable ABS and is available only in solid black. It can be customised using pad printing; serial numbering is applied using laser technology. With European and US UHF and UCODE 8 chip, this wristband can be read up to a distance of 3 metres!

WB011 is a unisex RFID wristband made of silicone, a flexible material that retains its elasticity at very low temperatures while being resistant to high temperatures, especially in hot, damp environments. Equipped with a non-allergenic metal snap, it stands out with its elegant design and rounded edges, ensuring high comfort and a pleasant feel. The strap can be customised using silkscreen printing; serial numbering can be applied using laser technology. It is available in high and low frequencies, in the following colours: red, yellow, green, blue and others on request.