Products

LB017 is a flexible and adhesive paper RFID label.
Rectangular in shape, it measures 20 mm x 10 mm. Ideal for all types of non-metal surfaces, it can be customised using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints only. LB017 is available in white and in HF with the FM11RF08 chip, which can be read up to a distance of 5 cm.

LB018 is an RFID label made of PVC, a ductile and flexible thermoplastic material.
Round in shape, it has a diameter of 30 mm and is suitable for non-metal surfaces, with application using a special adhesive. It can be customised using offset or inkjet technology for colour or black-and-white prints, or thermographic printing for black-and-white prints only. LB018 is white and available in HF with the MIFARE CLASSIC 1K EV1 S50 chip.

LB019 is a flexible and adhesive coated paper RFID label.
Round in shape, it has a diameter of 30 mm, while the engraved aluminium inlay or antenna has a diameter of 27 mm. It can be applied to non-metal surfaces and is resistant to high temperatures. Indeed, it can tolerate up to 80°C during operation. White in colour, it is available in HF. With the MIFARE CLASSIC 1K EV1 S50 chip, it is suitable for proximity readings from 3 to 6 cm. 

LB020 is an RFID tag made of PET, a flexible thermoplastic material that is resistant to cuts, atmospheric changes and high temperatures. Indeed, this label can tolerate up to 70°C in operation and storage. Rectangular in shape, it measures 106.5 mm x 28.5 mm; the antenna has the following dimensions: 95 mm x 12 mm. LB020 is applied to non-metal materials by means of an adhesive backing. Printing and numbering can be carried out using offset or inkjet technology for colour or black-and-white prints, and thermographic printing for black and white. It is white and available in UHF with UCODE 8 chips, with both European and US frequencies.

LB021 is an adhesive RFID tag made of coated paper.
Rectangular in shape, it measures 73 mm x 17 mm, while the antenna inlay is 70 mm x 14 mm.
LB021 can be applied to non-metals with an adhesive backing. It can be customised using offset or inkjet technology for colour or black-and-white prints, and thermographic printing for black and white. It is white and available in UHF, with the MONZA M730 chip.

LB022 is an adhesive RFID label made of coated paper. 
Rectangular in shape, it measures 60 mm x 32 mm and features a high temperature resistance, high solvent resistance, high viscosity relative to HSE parameters, and low styrene emissions (LSE).
LB022 can be applied to all metal and non-metal surfaces by means of an adhesive backing. 
This label can be customised using offset or inkjet technology for colour or black-and-white prints, and thermographic printing for black-and-white prints. It is white and operates in HF with a NTAG213 chip, an NFC Forum Type 2 technology.

LB023 is an adhesive paper RFID label.
Square in shape, it measures 40 x 40 mm with an inlay of 22.5 x 22.5 mm and can be applied to non-metal surfaces, via adhesive support.
This label can be customised by offset or inkjet printing, if in colour or black and white, and with a thermographic printer, if in black
and white.
It is white in colour with UHF frequency and HIGGS3 chip.

LB024 is a coated paper adhesive RFID label, rectangular in shape. It measures 54 x 34 mm, the inlay measures 50 x 30 mm.
It reads up to 8 metres, guarantees excellent performance operating in the UHF frequency with the UCODE 9 chip.
LB024 is applied to non-metal surfaces, via adhesive.
This label can be customised with offset or inkjet printing, if in colour or black and white, and with a thermographic printer, if in black and white.

LB025 is an adhesive RFID label in synthetic paper or in PET, rectangular in shape. It measures 53 x 33 mm, the inlay measures 50 x 30 mm.
LB025  can  be  applied  to non-metallic surfaces by means of the adhesive. In addition, it can be customised with offset or inkjet, for colour and black and white prints, and with thermography, for black and white prints. White, it is available in the UHF frequency, with the UCODE8 chip.

LB026 is a PET RFID label, rectangular in shape, measuring 60 x 12 x 0.9 mm and weighing only 0.5 grams. 
It is a transverse smart label: it is applied to both metals and non-metals by means of an adhesive, adapting perfectly to the shape of the surface. 
White in colour, it is available in the UHF frequency with the MONZA R6P chip, with a reading distance that can be adjusted according to the environment, the reader used and the application.
It withstands the harshest conditions thanks to its IP68 rating and can be customised using offset or inkjet, colour and black and white, and thermographic printing.

LB027 is a synthetic paper RFID tag available in UHF with the HIGGS-EC chip.
It measures 100 x 32 mm and is readable up to 10 m with a fixed reader. 
The special feature of the LB027 RFID smart label is its tamper-proof design.
In addition, it can be applied to non-metallic surfaces, more precisely glass, by means of an adhesive.
LB027 can be customised by offset or inkjet, for colour and black and white prints, and by thermography, for black and white prints.

LB028 is a PET adhesive RFID label, rectangular in shape.
It measures 85 x 65 mm, with an inlay of 70 x 17 mm. 
It reads up to 6 meters, ensures excellent performance by operating in the UHF frequency with UCODE 9 and HIGGS 9 chips. 
LB028 is applied by adhesive to glass and non-metallic surfaces.
Printing and numbering is done by offset or inkjet, for color and black-and-white prints, and by thermography, for black-and-white prints.

LB029, is an adhesive RFID tag made of PET, round. 
Due to its special strength and thickness, it has a high resistance to water and environmental stress. 
It has a diameter of 25 mm, its inlay measures 21 mm and is applied to non-metallic surfaces by means of adhesive. 
LB029 is an NFC label that operates at a frequency of 13.56 Mhz in HF, High Frequency, with the NTAG 213 chip.
LB029 can be printed using offset or inkjet techniques in both color and black and white, and with thermography only in black and white.

LB031 is a square RFID tag made of coated paper. It measures 25 x 25 mm and can be applied by adhesive to non-metallic surfaces.
Printing and numbering is done by offset and inkjet for colour or black-and-white prints, and by thermography for black-and-white only.
LB031 is a white NFC tag, with HF frequency and NTAG213 chip.

LB032 is an adhesive RFID tag made of PET, rectangular in shape. 
It measures 64 x 28 mm and operates in the UHF frequency with the MONZA M730 chip. LB032 is applied by adhesive to non-metallic surfaces.
Offset or inkjet printing is suitable for both colour and black-and-white prints, while thermography is used specifically for black-and-white prints.

LT007 is an RFID label made of soft fabric. Rectangular in shape, it can be sewn into the garment.
Available in two sizes — 70 mm x 15 mm x 1.6 mm and 86 mm x 16 mm x 1 mm — it is white and can be customised using a thermographic printer. During washing, it resists up to 90°C for 15 minutes; during pre-drying, it resists up to 180°C for thirty minutes 200 times, while during ironing, it withstands up to 180°C for ten seconds for 200 times. Finally, when subjected to disinfection, it withstands 135°C for 20 minutes.
LT007 operates in UHF with the UCODE 7, UCODE 8, MONZA R6P chips.

LT008 is an RFID tag composed of a fabric part and a silicone part. Rectangular in shape, it is sewn into the seam of the garment to be identified. Its dimensions are 65 x 16 x 2.7 mm, its colour is white and it is customizable with thermography. LT008 can withstand up to 200 washes and can tolerate: a temperature of 90°C for fifteen minutes, drying treatment up to 160°C for thirty minutes, and ironing up to 200°C for a maximum of ten seconds. Furthermore, if this tag is inserted in the finishing tunnel, it can tolerate up to 185°C for half an hour, and if it is placed in the industrial extractor, it can withstand a pressure of 60 Bar, equivalent to 600 N/cm². 
Finally, the LT008 tag - available in UHF, with MONZA 4QT and MONZA 4E chips - has a reading distance of five metres when read by a fixed reader and two and a half metres when read by a handheld reader.

The LT009 is a fabric and silicone RFID tag with a rectangular shape. It can be sewn into the seam of the garment to be identified. Measuring 68 x 26 mm, it's white and customizable through thermography.
The LT009 can withstand up to 200 washes and operates in the following conditions: washing at 90°C for 15 minutes, drying at up to 160°C for 30 minutes, ironing at 200°C for 10 seconds, finishing tunnel up to 185°C for 30 minutes, and industrial extractor up to 60 Bar (600 N/cm²). The UHF tag is available with MONZA 4QT and MONZA 4E chips and offers a read range of five metres with a fixed reader and two and a half metres with a handheld reader.

LT010 is an RFID tag made of fabric.
Rectangular in shape, it is applied by attaching it inside the seam of the identified garment.
Its dimensions are 68 x 20 x 1.6 mm, it is white and is customisable with thermographic printing.
The LT010 label withstands a maximum of 200 washes and, at an operational level, maintains its integrity if the following conditions are met: washing at 90°C for 15 minutes, drying at 160°C for half an hour, ironing at 200°C for 10 seconds, finishing tunnel at 185°C for 30 minutes and industrial extraction at 60 Bar, which is 600 N/cm2.
LT010 has the UHF frequency and has the MONZA 4QT chip.
It can be read by a fixed RFID reader up to a distance of four and a half metres and by a handheld RFID reader up to 2.5 metres.

LT011 is a fabric RFID tag. Rectangular in appearance, it can be applied by inserting it into the seam of the garment to be identified. It measures 55 x 12 x 1.6 mm, weighs 1.1 gram, is white and can be customised with thermography.
LT011 is a label designed for industrial laundries and is resistant to up to 200 washes. Operationally, it is washable at a temperature of 90°C for fifteen minutes, in the dryer it resists at 160°C for thirty minutes and is ironable at 200°C for ten seconds. Finally, it tolerates the finishing tunnel at up to 185°C for half an hour and the industrial extractor at up to 60 Bar, i.e. 600 N/cm2.
LT011 is available with two UHF chips: MONZA 4QT and UCODE 8.
Furthermore, if this tag is read by a fixed RFID reader it reaches a distance of two metres, while if it is identified by a handheld RFID it reaches one metre.

LT012 is a fabric RFID tag. Rectangular in shape, it is applied to the garment to be identified by heat-sealing at 200°C, with a pressure of 2 Kg/cm2 for 30 seconds.
Its dimensions measure 70 x 15 x 1.6 mm and its weight is equivalent to 1.3 grams. Available in white, the customisation of this label is done by thermographic printing technique.
The LT012 was created for industrial laundries and has specific features that make it ideal for all typical operations in this sector.
Its life cycle lasts up to 200 washes, during which it withstands a temperature of 90°C for fifteen minutes. Then, when subjected to drying it tolerates up to 160°C for half an hour and ironing is applicable up to 200°C for 10 seconds. Finally, it withstands up to 185°C for half an hour inside the finishing tunnel and withstands industrial stretching up to 60 Bar, i.e. 600 N/cm2.
The LT012 is available in the catalogue with the UHF chips: MONZA 4QT, UCODE 7, UCODE 8 and UCODE 9.
Furthermore, it can be read by a fixed RFID reader up to 5 metres, and by a handheld RFID reader up to a distance of two and a half metres.

Mifare Classic cards are the most popular contactless RFID cards operating in the 13.56 MHz frequency range.

These RFID cards have a special anti-collision function, which allows several cards to be used simultaneously in the same field without interference.

Mifare Classic cards have both read and write capability, and are compliant with the ISO 14443 A standard. They have paved the way for several applications such as access control at hotels and companies, attendance control at schools and businesses, ticketing for public transport, car park management and electronic toll collection. 

They are available in PVC, PETG and wood, in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood. The following types of Mifare Classic chips are available: Mifare Classic 1K EV1 (in 4-byte IUD and 7-byte UID versions), Mifare Classic 4K EV1.

Mifare DESFire cards are RFID cards operating in high frequency, at 13.56 MHz. The high performance offered by these cards is already clear from their name. Indeed, ‘DES’ indicates the high level of security tied to the 3DES or AES hardware encryption engine used to encrypt data contained in the chip, while ‘Fire’ refers to its speed and reliability.

The data transmission mode of DESFire cards is read/write. In addition, they are equipped with an anti-collision function, which allows multiple cards to be used simultaneously within the same range of the reader without interference. 

Compliant with standard ISO 14443, these cards are also NFC Forum Type 4 compliant and therefore fully interoperable with NFC readers for Mifare transponders. 

Given their security and flexibility, Mifare DESFire cards are used in a wide range of applications, such as access control at hospitality facilities, schools and universities; ticketing for public transport; micropayments and loyalty programmes; tolls and parking; event ticketing.  

They are available in PVC, PETG and wood, with the following dimensions: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood. 

The following Mifare DESFire chips are available: Mifare DESFire EV1 2K, 4K, 8K; Mifare DESFire EV2 2K, 4K, 8K; Mifare DESFire EV3 2K, 4K, 8K; Mifare DESFire Light.

Mifare Plus cards are contactless RFID cards operating in the HF band at 13.56 MHz. They transmit data in read/write mode and comply with standard ISO 14443, which defines the operation of contactless smart cards in identification, access control and ticketing systems.

Mifare Plus RFID cards present an anti-collision feature, which allows multiple cards to be used simultaneously in the same field, ensuring that each transaction is carried out correctly, without interference. Furthermore, the integrity of the transmitted data is guaranteed by a three-pass mutual authentication algorithm.

With their high level of security, Mifare Plus cards are ideal for various applications in smart cities, such as access control and identification at hospitality facilities, schools and universities; loyalty cards and programmes; car parks; electronic toll collection, and micropayments.

They are available in three different materials (PVC, PETG and wood), in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood. The following types of Mifare Plus chips are available: Mifare Plus SE; Mifare Plus EV2 2K and 4K.

Mifare Ultralight cards are high-frequency contactless RFID cards operating at 13.56 MHz. Data transmission takes place in read/write mode.

These cards operate in accordance with standard ISO 14443 A with regard to the operation of contactless badges for identification, access control and electronic ticketing systems. In addition, they are compliant with the NFC Forum Type 2 protocol. The anti-collision algorithm allows several cards to be used in the same magnetic field, avoiding mutual interference.

Mifare Ultralight cards are widely used for identification in public transport, event ticketing and loyalty projects. 

They are available in three materials (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood. The following types of Mifare Ultralight chips are available: Mifare Ultralight EV1-1; Mifare Ultralight EV1-2; Mifare Ultralight C.

MIM1024/Prime cards are contactless, high-frequency RFID cards operating at 13.56 MHz. The variable memory segmentation and protected read/write programmability make them remarkably flexible! MIM1024/Prime RFID cards comply with protocol ISO 14443 A and ensure high security standards with the ‘Master-Token’ system, which automatically manages the keys. The data collected can be transferred in encrypted mode. Excellent for any ticketing operation, these cards are also used for loyalty projects, access control and biometric data storage. Finally, MIM1024/Prime RFID cards are produced in PVC, PETG materials with dimensions 86 mm x 54 mm x 0.86 mm, while the dimensions for wood are 86 mm x 54 mm x 1.3 mm.

MIM256/Prime cards are contactless RFID cards operating at 13.56 MHz, i.e. HF. They feature special memory flexibility with variable segments, and can be programmed with protected read/write. Equipped with protocol ISO 14443 A, MIM256/Prime RFID cards have a ‘Master-Token’ function, which enables automatic key management. Moreover, the information collected by these badges is transferred in encrypted form. Finally, MIM256/Prime cards are used in ticketing for local public transport and events, loyalty projects, access control, and biometric data collection. They are available in PVC and PETG with dimensions 86 mm x 54 mm x 0.86 mm, while they are available in wood with dimensions 86 mm x 54 mm x 1.3 mm.

NTAG 210 cards are contactless cards operating at 13.56 MHz, i.e. high frequency. They comply with the ISO 14443 A standard, which regulates the operation of contactless smart cards, and with the NFC Forum Type 2 protocol. They have a memory of 48 bytes and a unique identifier, together with a programmable read-only lock function. Equipped with an anti-collision function, NTAG 210 cards can read and write up to a distance of 10 cm. They are particularly used for loyalty projects. NTAG 210 cards are available in PVC, PETG and wood, in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

NTAG 413 DNA cards are high-frequency contactless RFID cards operating at 13.56 MHz. They comply with the ISO/IEC 14443 A standard, which regulates the operation of proximity cards, and with the NFC Forum Type 4 protocol. Data security with NTAG 413 DNA cards is ensured by three-step mutual authentication and the Secure Unique NFC Message (SUN) function, which enables communication dedicated to each user based on established criteria. The applications of NTAG 413 DNA cards include access control and electronic vouchers. These badges are available in PVC, PETG and wood, in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

NTAG 424 DNA cards are contactless RFID badges that operate in the HF-band at 13.56 MHz. They follow standard ISO 14443 A for proximity cards. They also offer maximum interoperability in the NFC infrastructure, thanks to compliance with the Near Field Communication Forum Type 4 protocol. They are equipped with the Secure Unique NFC (SUN) message authentication mechanism, which is enabled for every reading performed by NFC devices. Furthermore, data protection is guaranteed by crypto-secure authorisations. NTAG 424 DNA cards are suitable for several applications in smart cities, including attendance control at companies, document authentication and loyalty programmes. They are available in PVC, PETG and wood, in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

Ntag213 RFID cards are contactless HF cards operating at 13.56 MHz. They are compliant with the NFC Forum Type 2 protocol. They follow the ISO 14443 A protocol and feature an anti-collision algorithm, which allows several tags to be read simultaneously in the same magnetic field. Ntag213 cards can be read up to a distance of 10 cm, depending on magnetic fields, the environment and application.NTag213 cards are mainly used foridentification, even in the industrial sector. They measure 86 mm x 54 mm x 0.86 mm for PVC and PETG, and 86 mm x 54 mm x 1.3 mm for wood.

Ntag215 RFID contactless cards operating in HF, 13.56 MHz, and in compliance with the NFC Forum Type 2 protocol. Compliant with standard ISO 14443 A, they feature an anti-collision function, which allows multiple tags to be read simultaneously in the same field, thus eliminating margins of error when reading. Ntag215 cards cover a reading distance of 10 cm depending on the context of application, magnetism and environmental conditions. They are also suitable for identification projects in various fields, including industry and retail. Finally, Ntag215 cards are available in PVC and PETG with dimensions 86 mm x 54 mm x 0.86 mm, and in wood with dimensions 86 mm x 54 mm x 1.3 mm.

Ntag216 cards are HF contactless cards operating at a frequency of 13.56 MHz. Manufactured according to standard ISO 14443, they have NFC Forum Type 2 technology and feature an anti-collision algorithm, which allows multiple tags to be read simultaneously in the same magnetic environment, avoiding errors.  Furthermore, Ntag216 cards are capable of being read up to a distance of 10 cm depending on the context, magnetism and reader used. As for applications, Ntag216 cards are also ideal for identification in industry and retail settings. Their dimensions vary depending on the material chosen. They measure 86 mm x 54 mm x 0.86 mm in PVC or PETG and 86 mm x 54 mm x 1.3 mm in wood.

Q5 cards or 5555 cards are LF-band contactless RFID cards operating at 125 kHz. The data transmission mode is read/write.  They have a 33-byte memory and UID (unique identifier). In particular, the memory can be programmed to be read-only. The mode of operation is by password or direct access. Applications of the Q5 or 5555 cards include access control and identification at hotels, campsites and hospitality facilities, companies, schools and universities, as well as attendance control at companies. Q5 or 5555 cards are available in three types of material (PVC, PETG and wood), measuring 86 mm x 54 mm x 0.86 mm (PVC and PETG) and 86 mm x 54 mm x 1.3 mm (wood).

RF005 cards are contactless cards operating in HF at 13.56 MHz. They comply with the ISO/IEC 14443 A standard and transmit data in read/write mode.Equipped with a 512-bit (64 bytes) EEPROM memory and a unique identifier, these cards also have a programmable read-only block, offering high levels of security.RF005 cards have anti-collision functionality and can be read at up to 10 cm, which varies depending on the antenna geometry, reader, environment and type of application. Applications include: access control at hotels, companies and educational facilities, and ticketing for public transport. They are available in three different materials (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

RF32 cards are high-frequency contactless cards operating at 13.56 MHz. Compliant with ISO standard 14443 A, they are particularly secure, requiringthree-step authentication before reading or writing.

The chip in these cards is equipped with an anti-collision algorithm, which allows multiple cards to be used simultaneously within the same reader range, and cyclic redundancy checks (CRC) for error detection, which makes RF32 cards highly reliable. 

RF32 cards have a reading distance of up to 10 cm, which varies depending on the antenna geometry, reader, environment and type of application. They are ideal for ticketing in the public transport sector and other similar applications.

They are available in three types of material (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

HP034 is an RFID key fob made of PVC, a ductile thermoplastic material resistant to both very high and low temperatures. Designed with a hole for a string and a distinctive teardrop shape, the entire surface can be customised using offset and pad printing, while serial numbering can be applied using laser and inkjet techniques. HP034 is available in LF, HF and combo (LF+HF) frequencies and comes in white.

HP035 is an RFID key fob made of PVC, whose thermoplastic properties ensure good resistance to very high and low temperatures. It features two rectangular holes to easily insert a ribbon or string. It is rectangular in shape with rounded edges. The entire surface can be customised using offset and pad printing techniques. Serial numbering can be applied using laser or inkjet printing. HP035 can be ordered in LF, HF and combo (LF+HF) frequencies and comes in white.

HP038 is an RFID key fob made of PVC, a ductile thermoplastic material with high resistance to very high and low temperatures. Designed with a hole for a string, it is rectangular in shape and the entire surface can be customised using offset or pad printing and epoxy printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies and comes in white.

HP039 is an RFID key fob made of PVC, a thermoplastic material distinguished by its elasticity and resistance to very low and very high temperatures. 
Rectangular in shape, it has a lanyard hole and can be customised over the entire surface using offset, pad printing and epoxy printing techniques. While serialisation is possible with laser and inkjet.
It is available in white, LF, HF and combo (LF+HF) frequencies.

KF001 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties such as good rigidity and hardness, resistance to high and low temperatures, impacts and scratches. KF001 features a teardrop design and a double metal hook-and-loop fastener for dual attachment. It can be customised using silkscreen printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF (with a EM4200, ATA5577 or T5567, EM4550 or TITAN chip) and HF (with the MIFARE CLASSIC 1K EV1 S50 chip) in the following colours: grey, yellow, red, green, purple and blue.

KF002 is an RFID key fob made of ABS, a thermoplastic material featuring good rigidity, high and low temperature resistance, impact resistance and water resistance. It shows refined workmanship on both the front and back.
With a metal ring clasp and teardrop design, KF002 can be customised with silkscreen and pad printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies, and in the following colours: blue, black, green, grey, yellow, red and white. 

KF003 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties such as good rigidity and hardness, impact resistance and water resistance. With a metal ring and teardrop shape, it is available in two options, one more resistant to high temperatures (-T) and the other less resistant (-R). It can be customised using screen and pad printing, while serial numbering can be applied using laser technology. KF003 is available in LF, HF and combo (LF+HF) frequencies, in the following colours: blue, black, green, grey, yellow, red and orange. It can also be ordered in combinations with a white cover and housing in black, red, yellow, green or blue.

KF007 is an RFID key fob made of PA6, a nylon with excellent mechanical properties, which is resistant to traction and compression, wear and atmospheric agents. With its characteristic teardrop shape and smooth surface, this keyfob has a hole for inserting a lanyard.

KF007 can be personalised using pad printing, while serial numbering can be applied using laser, inkjet and UV inkjet technologies. It is available in LF, HF, UHF and combined LF+HF and HF+UHF frequencies, in ten colours: red, orange, yellow, green, blue, navy blue, purple, white, grey, black.

KF008 is an RFID key fob made of PA6 (nylon), a plastic material with excellent mechanical properties. Resistant to tensile stress and compression, it is also wear-resistant and weatherproof. Teardrop-shaped and featuring a lanyard hole, it can be customised using silkscreen printing, while serial numbering can be applied using laser and inkjet technology. KF008 is available in LF, HF and combined (LF+HF) frequencies and in the following colours: black, white, red, blue, green, yellow and orange.

KF009 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties such as rigidity, hardness, impact resistance and water resistance. Rectangular in shape, it has a metal ring and customisable label housed within a transparent body. Available in UHF — European and US — with the HIGGS 3 chip, KF009 reads up to a distance of 70 cm. KF009 can be customised using offset or silkscreen printing, while serial numbering is applied using laser or inkjet technology.

KF010 is an RFID key fob with an ABS housing and stainless steel frame, which makes it rigid and durable, resistant to both water and high temperatures.Featuring a refined rounded shape, it has a ring built into the body of the key fob, and can be customised using silkscreen and pad printing. serial numbering can be applied using laser and inkjet technology. It is available in LF, HF and combo (LF+HF) frequencies, in the following colours: black, white and blue.