Products

KF011 is a fully waterproof and durable faux leather RFID key fob with a metal ring. With its exclusive and sophisticated rectangular design, it can be customised using pad printing, while serial numbering can be applied using laser technology. KF011 is available in elegant colours: dark purple, dark blue, light blue, red, white, grey and black, in LF (chips: EM4200, EM4550 or TITAN, ATA5577 or T5567, HITAG2), HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE CLASSIC 4K EV1 S70,  MIFARE DESFIRE EV2 4K, MIFARE DESFIRE EV3 2K/4K/8K, MIM1024/PRIME, NTAG213) and COMBO LF+HF (chips: MIFARE CLASSIC 1K EV1 S50 + EM4200, MIFARE CLASSIC 1K EV1 S50 + T5567, MIFARE DESFIRE 4K/8K EV3 + EM4200, MIFARE DESFIRE 4K EV3 + ATA5577) frequencies.

KF012 is an RFID key fob made of PVC, a flexible and ductile thermoplastic material with high resistance to very high and low temperatures. Designed with a hole for a string, it is rectangular and the entire surface can be customised using offset and pad printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies and comes in white.

KF013 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties, such as good rigidity and hardness, impact resistance and water resistance. Designed with a hole for a string, it has a fresh and lively teardrop design enhanced by bright, attractive colours in the following combinations: black and white, white and grey, white and blue, white and purple, white and red, white and orange, white and pink, white and green, white and yellow. In addition, KF013 can be customised using inkjet printing, and serial numbering can be applied using laser technology. It is available in LF (chip: ATA5577 or T5567, EM4200) and HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE DESFIRE EV2 2K/4K/8K).

KF014 is an RFID key fob made of nylon and metal, materials that withstand high and low temperatures, chemicals and mechanical stress. Rectangular in shape, with a ring closure, it combines the robustness of the upper metal housing with the elegance of the matt texture. It can be customised using pad printing, while serial numbering can be applied using laser technology. RFID key fob KF014 is available in colours: white, black, grey, red, dark blue, light blue, purple. It works at LF (chips: EM4200, EM4550 or TITAN, ATA5577 or T5567, HITAG2), HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE CLASSIC 4K EV1 S70,  MIFARE DESFIRE EV2 4K, MIFARE DESFIRE EV3 2K/4K/8K, MIM1024/PRIME, NTAG213) and COMBO LF+HF (chips: MIFARE CLASSIC 1K EV1 S50 + EM4200, MIFARE CLASSIC 1K EV1 S50 + T5567, MIFARE DESFIRE 4K/8K EV3 + EM4200, MIFARE DESFIRE 4K EV3 + ATA5577) frequencies.

ST25TB02K cards are high-frequency contactless RFID cards operating at 13.56 MHz (carrier frequency) and 847 kHz (subcarrier frequency). They comply with the ISO 14443 B international standard, which regulates the operation of proximity cards. 

Equipped with a 256-byte EEPROM memory with write-protection and a unique identifier (UID), these cards have anti-collision functionality and as many as 1 million program/erase resistance cycles.

They are ideal for short-range applications in several areas, such as access control and personal identification, attendance control and electronic wallets for self-service machines.ST25TB02K cardsare available in PVC, PETG and wood, in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

ST25TB04K cards are contactless RFID cards operating in HF at 13.56 MHz (carrier frequency) and 847 kHz (subcarrier frequency). They are designed in accordance with standard ISO 14443 B, with respect to parts 2 (for RF signal strength) and 3 (for anti-collision filtering). The anti-collision algorithm is particularly important because it allows tags present in the same magnetic field to be identified at the same time.

ST25TB04K RFID cards are designed for multiple applications, such as access control, attendance control, identification and as electronic wallets.

Finally, all ST25TB04K cards are available with dimensions 86 mm x 54 mm x 0.86 mm for PVC and PETG, and 86 mm x 54 mm x 1.3 mm for wood.

ST25TB512 cards are HF contactless cards operating at a frequency of 13.56 MHz (carrier) and 847 kHz (subcarrier). They operate in accordance with standard ISO 14443 Type B, referring to parts 2 — for power and radio frequency — and 3 — for initialisation and anti-collision features. The latter feature allows several tags to be read in the same magnetic field, avoiding errors.

Designed for short-range reading applications, ST25TB512 cards are ideal for access control, personal identification and as electronic wallets.

Finally, ST25TB512 cards are available in wood, measuring 86 mm x 54 mm x 1.3 mm, and in PVC and PETG, measuring 86 mm x 54 mm x 0.86 mm.

Tag-IT cards are contactless RFID cards operating in high frequency at 13.56 MHz. They comply with the ISO 15693 standard, which regulates the operation of contactless integrated circuit cards (vicinity cards) capable of being read at long distances.

Tag-IT cards read and store user data in a non-volatile EEPROM user memory of 32 bytes (256 bits) or 256 bytes (2 kilobits). Equipped with a unique identifier (UID), they have an anti-collision mechanism, which allows multiple cards to be used without interference in the same reader range.

Tag-IT cards are used in electronic ticketing systems and for access control in buildings.

They are available in three types of material — PVC, PETG, wood — in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood. 

The chip types available for Tag-IT are the following: Tag-IT 256, Tag-IT 2K.

WB001 is a unisex RFID wristband with a nylon strap and adjustable adhesive Velcro fastener with plastic loop. It features a PVC dial and ABS case. The white dial with black case can be customised using silkscreen printing, while serial numbering can be applied using laser or inkjet techniques. The strap comes in three colours: yellow/black, red/black and blue/black. The wristbands are available in LF, HF and UHF.

WB002 is an RFID wristband for women, entirely Made in Italy using polyurethane, a material resistant to water, salt and moisture. Featuring an open cuff, the dial of this wristband is white and can be customised using offset and resin printing, while serial numbering can be applied using laser or inkjet technology. These wristbands are available in LF (EM4200, ATA5577 or T5567, EM4550 or TITAN, HITAG2, HITAG S 2048, HITAG S 256) and HF (MIFARE CLASSIC 1K EV1 S50, MIFARE CLASSIC 4K EV1 S70, MIFARE ULTRALIGHT EV1-1, MIFARE ULTRALIGHT EV1-2, MIFARE ULTRALIGHT C, TAG-IT 256, TAG-IT 2K), and in the following colours: black, blue, pink and yellow. 

WB003 is an RFID wristband for men entirely Made in Italy using polyurethane, a material resistant to water, salt and moisture. Featuring an open cuff, the dial of this wristband is white and can be customised using offset and resin printing, while serial numbering can be applied using laser or inkjet technology. The wristband is available in LF (EM4200, ATA5577 or T5567, EM4550 or TITAN, HITAG1, HITAG2, HITAG S 2048, HITAG S 256) and HF (MIFARE CLASSIC 1K EV1 S50, MIFARE CLASSIC 4K EV1 S70, MIFARE ULTRALIGHT EV1-1, MIFARE ULTRALIGHT EV1-2, MIFARE ULTRALIGHT C, TAG-IT 256, TAG-IT 2K), and in the following colours: black, blue, pink and yellow.

WB004 is a unisex RFID wristband made of silicone, a flexible, waterproof material that retains its elasticity even at very low temperatures, with good resistance to higher temperatures and weathering. Available in two sizes, it has a fixed clasp. The dial and strap can be customised using pad printing, while serial numbering can be applied using laser technology. The wristband is available in LF, HF and UHF, in the following colours: red, green, light blue, dark blue and black.

WB005 is a unisex RFID wristband made of silicone, a flexible, waterproof material that retains its elasticity even at low temperatures, with good resistance to high temperatures and weathering. Available in three sizes, it has a fixed clasp. The dial and strap can be customised using pad printing, while serial numbering can be applied using laser technology. The wristband is available in LF (chips: EM4200, ATA5577 or T5567) and HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE CLASSIC 4K EV1 S70, MIFARE ULTRALIGHT EV1-1, MIFARE ULTRALIGHT C, NTAG213), in the following colours: black, blue, orange, yellow, red, grey.

WB006 is a unisex wristband, Made in Italy using PVC, a versatile material give its resistance to water, wear, chemicals, fungi and bacteria.
Equipped with a tear-proof, non-allergenic metal snap fastener, special microwave welding and sweat-proof knurling, this wristband is designed for heightened comfort.
The dial and strap can be customised using pad printing, while serial numbering can be applied using laser technology. WB006 is available in LF with the EM4200  chip and in HF with the MIFARE CLASSIC 1K EV1 S50 chip. It comes in red, orange, yellow, green, light blue, blue, purple (strap) and black (dial).

WB007 is a unisex RFID wristband made of silicone, a flexible, waterproof material that retains its elasticity even at very low temperatures, with good resistance to higher temperatures. Ergonomic and easy to wear, with adjustable clasp. The dial and strap can be customised using silkscreen printing, while serial numbering can be applied using laser technology.  WB007 is available in both LF and HF, in the following colours: red, yellow, green, blue and others on request.

WB010 is a unisex RFID wristband with a nylon strap and adjustable Velcro fastener. The dial is made of a printable ABS and is available only in solid black. It can be customised using pad printing; serial numbering is applied using laser technology. With European and US UHF and UCODE 8 chip, this wristband can be read up to a distance of 3 metres!

WB011 is a unisex RFID wristband made of silicone, a flexible material that retains its elasticity at very low temperatures while being resistant to high temperatures, especially in hot, damp environments. Equipped with a non-allergenic metal snap, it stands out with its elegant design and rounded edges, ensuring high comfort and a pleasant feel. The strap can be customised using silkscreen printing; serial numbering can be applied using laser technology. It is available in high and low frequencies, in the following colours: red, yellow, green, blue and others on request.

WB014 is a unisex RFID wristband made of polyester fabric, which is resistant to tears, wear and abrasion, as well as mould and bacteria, which make the wristband reusable. With a fixed fastener, it is elastic and lightweight, for comfortable wear. The dial and strap can be customised using digital printing in several colours, while serial numbering is applied using thermographic printing. WB014 is available in HF with the MIFARE CLASSIC 1K EV1 S50 chip. 

WB101 is a unisex RFID wristband made of PET, a material that offers excellent resistance to high temperatures, weathering, cuts and abrasions. It has a snap fastener. The dial and strap can be customised using offset printing, while serial numbering can be applied using thermographic printing; barcodes or QR/data matrix codes can also be printed. Available in HF, with a MIFARE CLASSIC 1K EV1 S50 chip; available in white.

WT001 is a wet inlay made of PET, a flexible, cut- and weather-resistant thermoplastic material. Rectangular in shape, it measures 100 mm x 12 mm x 0.10 mm and can be applied to non-metal surfaces by means of an adhesive backing. Transparent in colour, it is available in UHF with the HIGGS 3 chip.

WT002 is a wet inlay made of PET. It is flexible, cut- and weather-resistant.  Rectangular in shape, it measures 36 mm x 22 mm x 0.23 mm and can be applied to non-metal materials by means of a special adhesive. It has a transparent surface, and is available in UHF with the MONZA R5 chip.

WT003 is a wet inlay made of PET, a material featuring flexibility and resistance to cuts and thermal shocks. Rectangular in shape, it is adhesive and flexible, andmeasures 64 mm x 6 mm.
It has a transparent surface, is applied using an adhesive and is suitable for non-metal materials. WT003 is available in UHF with the UCODE 8 chip in both European and US frequencies.

WT004 is a wet inlay made of PET, a flexible thermoplastic material resistant to cuts and thermal shock. Round in shape, it has a diameter of 22 mm and a thickness of 0.2 mm. It is transparent and is applied to non-metal surfaces by means of a special adhesive. This wet inlayis available in HF with the NTAG213 chip.

WT005 is a wet inlay made of PET, a type of thermoplastic material featuring flexibility, cut resistance and resistance to temperature changes.
Square in shape, it is adhesive and flexible; it measures 48 mm x 48 mm, and has a transparent surface. Suitable for non-metal surfaces, it is available in UHF with a KX2005XG-B chip (compatible with MONZA 4QT).

WT006 is a wet inlay made of PET, a flexible thermoplastic material that is resistant to cutting and thermal shock.
Rectangular in shape, it measures 86 x 46 mm and has an inlay of 75 x 45 mm. Transparent in colour, it can be applied to non-metallic surfaces by means of adhesive.
This wet inlay is an NFC tag available in the HF frequency, with the ICODE SLIX chip.