-
HT016 Hard tag
€0.00HT016 is an RFID hard tag made of 90% PCB, resistant to extremely high temperatures.
Square in shape, this tag measures 6.7 x 6.7 x 0.75 mm and weighs 0.4 grams. It can be applied by adhesive and embedded inside plastics.
It is suitable for the identification - also with NFC readers - of medical devices and instruments that need to be sterilised at high temperatures.
In fact, it peaks at 250°C for 24 hours! It is a two-colour tag - blue and black - in HF frequency with the ICODE SLIX and ST25TB02K chips.
Both logo customisation and numbering can be carried out using laser technology. -
HT020 hard tags
€0.00HT020 is a ‘PCB tag’ featuring a PCB (printed circuit board) substrate, an insulating printed circuit board that connects various electronic components. It is protected by a fibreglass plate covered with a light layer of metal applied using high-temperature pressing following the lamination process.
Round, remarkably small and very light — it has a diameter of just 6.9 mm and a height of 0.94 mm, with a weight of just 0.5 grams! — HT020 is designed for smart management of projects requiring a small, discreet tag that can be applied to non-metal surfaces. It is applied using adhesive and is available in HF with the ICODE SLIX chip. -
HT082 hard tags
€0.00HT082 is an RFID hard tag made of TPU, thermoplastic polyurethane, a non-toxic polymer featuring elasticity, flexibility, oil and abrasion resistance, as well as being water and gas proof.
With its distinctive funnel shape, HT082 is a tag for animals, thus for non-metal surfaces, comprising a ‘male’ part — 100 mm x 75 mm x 13 mm — and a ‘female’ part — ø 29 mm x 23 mm. These two components are attached to the ears of cattle on breeding farms by means of an interlocking device. In addition, the HT082 weighs 16 grams and covers large reading distances: up to 6 metres when read from a fixed device, and up to 3 metres when using a handheld reader. Available in UHF — both European and US frequencies — with the UCODE 8 chip, it comes in yellow, orange and blue. Finally, numbering can be applied using laser or inkjet technology. -
HT086 hard tags
€0.00HT086 is a hard ceramic tag featuring low electrical conductivity and resistance to high temperatures. Rectangular, small and thin — measuring 10 mm x 5 mm x 3 mm — it is ideal for small spaces and can be glued to the surface of metal objects. HT086 is yellow and available in European and US UHF with the UCODE 8 chip.
-
RFID key fobs HP034
€0.00HP034 is an RFID key fob made of PVC, a ductile thermoplastic material resistant to both very high and low temperatures. Designed with a hole for a string and a distinctive teardrop shape, the entire surface can be customised using offset and pad printing, while serial numbering can be applied using laser and inkjet techniques. HP034 is available in LF, HF and combo (LF+HF) frequencies and comes in white.
-
RFID key fobs HP035
€0.00HP035 is an RFID key fob made of PVC, whose thermoplastic properties ensure good resistance to very high and low temperatures. It features two rectangular holes to easily insert a ribbon or string. It is rectangular in shape with rounded edges. The entire surface can be customised using offset and pad printing techniques. Serial numbering can be applied using laser or inkjet printing. HP035 can be ordered in LF, HF and combo (LF+HF) frequencies and comes in white.
-
RFID key fobs HP038
€0.00HP038 is an RFID key fob made of PVC, a ductile thermoplastic material with high resistance to very high and low temperatures. Designed with a hole for a string, it is rectangular in shape and the entire surface can be customised using offset or pad printing and epoxy printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies and comes in white.
-
RFID key fobs HP039
€0.00HP039 is an RFID key fob made of PVC, a thermoplastic material distinguished by its elasticity and resistance to very low and very high temperatures.
Rectangular in shape, it has a lanyard hole and can be customised over the entire surface using offset, pad printing and epoxy printing techniques. While serialisation is possible with laser and inkjet.
It is available in white, LF, HF and combo (LF+HF) frequencies. -
RFID key fobs KF001
€0.00KF001 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties such as good rigidity and hardness, resistance to high and low temperatures, impacts and scratches. KF001 features a teardrop design and a double metal hook-and-loop fastener for dual attachment. It can be customised using silkscreen printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF (with a EM4200, ATA5577 or T5567, EM4550 or TITAN chip) and HF (with the MIFARE CLASSIC 1K EV1 S50 chip) in the following colours: grey, yellow, red, green, purple and blue.
-
RFID key fobs KF002
€0.00KF002 is an RFID key fob made of ABS, a thermoplastic material featuring good rigidity, high and low temperature resistance, impact resistance and water resistance. It shows refined workmanship on both the front and back.
With a metal ring clasp and teardrop design, KF002 can be customised with silkscreen and pad printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies, and in the following colours: blue, black, green, grey, yellow, red and white. -
RFID key fobs KF003
€0.00KF003 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties such as good rigidity and hardness, impact resistance and water resistance. With a metal ring and teardrop shape, it is available in two options, one more resistant to high temperatures (-T) and the other less resistant (-R). It can be customised using screen and pad printing, while serial numbering can be applied using laser technology. KF003 is available in LF, HF and combo (LF+HF) frequencies, in the following colours: blue, black, green, grey, yellow, red and orange. It can also be ordered in combinations with a white cover and housing in black, red, yellow, green or blue.
-
RFID key fobs KF008
€0.00KF008 is an RFID key fob made of PA6 (nylon), a plastic material with excellent mechanical properties. Resistant to tensile stress and compression, it is also wear-resistant and weatherproof. Teardrop-shaped and featuring a lanyard hole, it can be customised using silkscreen printing, while serial numbering can be applied using laser and inkjet technology. KF008 is available in LF, HF and combined (LF+HF) frequencies and in the following colours: black, white, red, blue, green, yellow and orange.
-
RFID key fobs KF009
€0.00KF009 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties such as rigidity, hardness, impact resistance and water resistance. Rectangular in shape, it has a metal ring and customisable label housed within a transparent body. Available in UHF — European and US — with the HIGGS 3 chip, KF009 reads up to a distance of 70 cm. KF009 can be customised using offset or silkscreen printing, while serial numbering is applied using laser or inkjet technology.
-
RFID key fobs KF010
€0.00KF010 is an RFID key fob with an ABS housing and stainless steel frame, which makes it rigid and durable, resistant to both water and high temperatures.Featuring a refined rounded shape, it has a ring built into the body of the key fob, and can be customised using silkscreen and pad printing. serial numbering can be applied using laser and inkjet technology. It is available in LF, HF and combo (LF+HF) frequencies, in the following colours: black, white and blue.
-
RFID key fobs KF011
€0.00KF011 is a fully waterproof and durable faux leather RFID key fob with a metal ring. With its exclusive and sophisticated rectangular design, it can be customised using pad printing, while serial numbering can be applied using laser technology. KF011 is available in elegant colours: dark purple, dark blue, light blue, red, white, grey and black, in LF (chips: EM4200, EM4550 or TITAN, ATA5577 or T5567, HITAG2), HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE CLASSIC 4K EV1 S70, MIFARE DESFIRE EV2 4K, MIFARE DESFIRE EV3 2K/4K/8K, MIM1024/PRIME, NTAG213) and COMBO LF+HF (chips: MIFARE CLASSIC 1K EV1 S50 + EM4200, MIFARE CLASSIC 1K EV1 S50 + T5567, MIFARE DESFIRE 4K/8K EV3 + EM4200, MIFARE DESFIRE 4K EV3 + ATA5577) frequencies.
-
RFID key fobs KF012
€0.00KF012 is an RFID key fob made of PVC, a flexible and ductile thermoplastic material with high resistance to very high and low temperatures. Designed with a hole for a string, it is rectangular and the entire surface can be customised using offset and pad printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies and comes in white.
-
RFID key fobs KF013
€0.00KF013 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties, such as good rigidity and hardness, impact resistance and water resistance. Designed with a hole for a string, it has a fresh and lively teardrop design enhanced by bright, attractive colours in the following combinations: black and white, white and grey, white and blue, white and purple, white and red, white and orange, white and pink, white and green, white and yellow. In addition, KF013 can be customised using inkjet printing, and serial numbering can be applied using laser technology. It is available in LF (chip: ATA5577 or T5567, EM4200) and HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE DESFIRE EV2 2K/4K/8K).
-
RFID Key Fobs KF014
€0.00KF014 is an RFID key fob made of nylon and metal, materials that withstand high and low temperatures, chemicals and mechanical stress. Rectangular in shape, with a ring closure, it combines the robustness of the upper metal housing with the elegance of the matt texture. It can be customised using pad printing, while serial numbering can be applied using laser technology. RFID key fob KF014 is available in colours: white, black, grey, red, dark blue, light blue, purple. It works at LF (chips: EM4200, EM4550 or TITAN, ATA5577 or T5567, HITAG2), HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE CLASSIC 4K EV1 S70, MIFARE DESFIRE EV2 4K, MIFARE DESFIRE EV3 2K/4K/8K, MIM1024/PRIME, NTAG213) and COMBO LF+HF (chips: MIFARE CLASSIC 1K EV1 S50 + EM4200, MIFARE CLASSIC 1K EV1 S50 + T5567, MIFARE DESFIRE 4K/8K EV3 + EM4200, MIFARE DESFIRE 4K EV3 + ATA5577) frequencies.
-
WB101 RFID wristbands
€0.00WB101 is a unisex RFID wristband made of PET, a material that offers excellent resistance to high temperatures, weathering, cuts and abrasions. It has a snap fastener. The dial and strap can be customised using offset printing, while serial numbering can be applied using thermographic printing; barcodes or QR/data matrix codes can also be printed. Available in HF, with a MIFARE CLASSIC 1K EV1 S50 chip; available in white.
Toggle Nav
Search
Language
Products
Configure
