-
HT082 hard tags
€0.00HT082 is an RFID hard tag made of TPU, thermoplastic polyurethane, a non-toxic polymer featuring elasticity, flexibility, oil and abrasion resistance, as well as being water and gas proof.
With its distinctive funnel shape, HT082 is a tag for animals, thus for non-metal surfaces, comprising a ‘male’ part — 100 mm x 75 mm x 13 mm — and a ‘female’ part — ø 29 mm x 23 mm. These two components are attached to the ears of cattle on breeding farms by means of an interlocking device. In addition, the HT082 weighs 16 grams and covers large reading distances: up to 6 metres when read from a fixed device, and up to 3 metres when using a handheld reader. Available in UHF — both European and US frequencies — with the UCODE 8 chip, it comes in yellow, orange and blue. Finally, numbering can be applied using laser or inkjet technology. -
HT086 hard tags
€0.00HT086 is a hard ceramic tag featuring low electrical conductivity and resistance to high temperatures. Rectangular, small and thin — measuring 10 mm x 5 mm x 3 mm — it is ideal for small spaces and can be glued to the surface of metal objects. HT086 is yellow and available in European and US UHF with the UCODE 8 chip.
-
LB007 RFID label
€0.00LB007 is an RFID label made of PET, a plastic material resistant to cuts, weather and high temperatures. It can tolerate up to 85°C during operation.
Rectangular in shape, it comes in two sizes: 64 mm x 6 mm x 0.74 mm and 64 mm x 18 mm x 0.74 mm. LB007 can be applied to metal surfaces by means of the special permanent adhesive. It can be customised using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. White in colour, it is available in UHF with the UCODE 8 chip. -
LB009 RFID label
€0.00LB009 is a flexible and adhesive paper RFID label. It is rectangular in shape and measures 45 mm x 22 mm x 0.3 mm. It is applied to non-metal materials by means of an adhesive. It can be customised using offset or inkjet technology in colour and black and white, and thermographic printing in black and white. White in colour, LB009 is available in UHF, with the MONZA R6 chip, and can be read over large distances, which vary depending on the environment, application and reader.
-
LB012 RFID label
€0.00LB012 is an RFID label made of PET, a thermoplastic material featuring flexibility, resistance to cuts, weather and high temperatures. It can tolerate up to 85°C during operation. Rectangular in shape, it is covered with a layer of semi-gloss paper and measures 73 mm x 17.6 mm x 0.3 mm. LB012 is designed for adhesive application on non-metal materials that are hard to label, such as cardboard and plastic. It can be customised using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. It is white and available in UHF with the UCODE 8 chip.
-
LB020 RFID label
€0.00LB020 is an RFID tag made of PET, a flexible thermoplastic material that is resistant to cuts, atmospheric changes and high temperatures. Indeed, this label can tolerate up to 70°C in operation and storage. Rectangular in shape, it measures 106.5 mm x 28.5 mm; the antenna has the following dimensions: 95 mm x 12 mm. LB020 is applied to non-metal materials by means of an adhesive backing. Printing and numbering can be carried out using offset or inkjet technology for colour or black-and-white prints, and thermographic printing for black and white. It is white and available in UHF with UCODE 8 chips, with both European and US frequencies.
-
LB023 RFID label
€0.00LB023 is an adhesive paper RFID label.
Square in shape, it measures 40 x 40 mm with an inlay of 22.5 x 22.5 mm and can be applied to non-metal surfaces, via adhesive support.
This label can be customised by offset or inkjet printing, if in colour or black and white, and with a thermographic printer, if in black
and white.
It is white in colour with UHF frequency and HIGGS3 chip. -
LB032 RFID label
€0.00LB032 is an adhesive RFID tag made of PET, rectangular in shape.
It measures 64 x 28 mm and operates in the UHF frequency with the MONZA M730 chip. LB032 is applied by adhesive to non-metallic surfaces.
Offset or inkjet printing is suitable for both colour and black-and-white prints, while thermography is used specifically for black-and-white prints. -
RFID Key Fobs KF007
€0.00KF007 is an RFID key fob made of PA6, a nylon with excellent mechanical properties, which is resistant to traction and compression, wear and atmospheric agents. With its characteristic teardrop shape and smooth surface, this keyfob has a hole for inserting a lanyard.
KF007 can be personalised using pad printing, while serial numbering can be applied using laser, inkjet and UV inkjet technologies. It is available in LF, HF, UHF and combined LF+HF and HF+UHF frequencies, in ten colours: red, orange, yellow, green, blue, navy blue, purple, white, grey, black.
-
RFID key fobs KF009
€0.00KF009 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties such as rigidity, hardness, impact resistance and water resistance. Rectangular in shape, it has a metal ring and customisable label housed within a transparent body. Available in UHF — European and US — with the HIGGS 3 chip, KF009 reads up to a distance of 70 cm. KF009 can be customised using offset or silkscreen printing, while serial numbering is applied using laser or inkjet technology.
-
WB001 RFID wristbands
€0.00WB001 is a unisex RFID wristband with a nylon strap and adjustable adhesive Velcro fastener with plastic loop. It features a PVC dial and ABS case. The white dial with black case can be customised using silkscreen printing, while serial numbering can be applied using laser or inkjet techniques. The strap comes in three colours: yellow/black, red/black and blue/black. The wristbands are available in LF, HF and UHF.
-
WB004 RFID wristbands
€0.00WB004 is a unisex RFID wristband made of silicone, a flexible, waterproof material that retains its elasticity even at very low temperatures, with good resistance to higher temperatures and weathering. Available in two sizes, it has a fixed clasp. The dial and strap can be customised using pad printing, while serial numbering can be applied using laser technology. The wristband is available in LF, HF and UHF, in the following colours: red, green, light blue, dark blue and black.
-
WB010 RFID wristbands
€0.00WB010 is a unisex RFID wristband with a nylon strap and adjustable Velcro fastener. The dial is made of a printable ABS and is available only in solid black. It can be customised using pad printing; serial numbering is applied using laser technology. With European and US UHF and UCODE 8 chip, this wristband can be read up to a distance of 3 metres!
-
WT001 RFID wet inlay
€0.00WT001 is a wet inlay made of PET, a flexible, cut- and weather-resistant thermoplastic material. Rectangular in shape, it measures 100 mm x 12 mm x 0.10 mm and can be applied to non-metal surfaces by means of an adhesive backing. Transparent in colour, it is available in UHF with the HIGGS 3 chip.
-
WT002 RFID wet inlay
€0.00WT002 is a wet inlay made of PET. It is flexible, cut- and weather-resistant. Rectangular in shape, it measures 36 mm x 22 mm x 0.23 mm and can be applied to non-metal materials by means of a special adhesive. It has a transparent surface, and is available in UHF with the MONZA R5 chip.
-
WT003 RFID wet inlay
€0.00WT003 is a wet inlay made of PET, a material featuring flexibility and resistance to cuts and thermal shocks. Rectangular in shape, it is adhesive and flexible, andmeasures 64 mm x 6 mm.
It has a transparent surface, is applied using an adhesive and is suitable for non-metal materials. WT003 is available in UHF with the UCODE 8 chip in both European and US frequencies. -
WT005 RFID wet inlay
€0.00WT005 is a wet inlay made of PET, a type of thermoplastic material featuring flexibility, cut resistance and resistance to temperature changes.
Square in shape, it is adhesive and flexible; it measures 48 mm x 48 mm, and has a transparent surface. Suitable for non-metal surfaces, it is available in UHF with a KX2005XG-B chip (compatible with MONZA 4QT).
Toggle Nav
Search
Language
Products
Configure
