Products

ATC1024 cards are contactless RFID cards operating in HF at 13.56 MHz. 

They comply with the ISO 15693 standard, which regulates the operation of so-called vicinity cards, contactless cards capable of being read at long distances. Indeed, ATC1024 cards offer a read/write distance of up to 70 cm, which also depends on the reader, environment and type of application. 

Equipped with a memory of about 1 kB and a UID, they are very safe, because the chip protects the stored data using three encryption keys (3DES, DES, LEGIC). 

ATC1024 cards are used for several projects concerning access control and identification. 

They are available in three different materials (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

ATC256 cards are HF RFID cards operating at 13.56 MHz. Their use is regulated by the ISO 15693 standard, which regulates the operation of vicinity cards, that is, contactless cards that can be read at greater distances than proximity cards. In particular, the operating distance of ATC256 cards can reach up to 70 cm depending on the reader, environment and type of application. 

These cards have a dynamically segmented 224-byte memory, and a unique identifier. Three encryption keys (AES 128/256 bits, 3DES, Legic) offer high levels of security.

ATC256 cards are ideal for access control at hospitality facilities and ticketing (events and public transport). 

They are available in three materials (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

ATC4096 cards are contactless cards operating in HF at 13.56 MHz. They comply with the ISO 14443 A standard, which defines the operation of cards used for electronic ticketing, access control, identification and payment systems.

Equipped with a dynamically segmented memory of 4096 bytes and a unique identifier, these cards can hold as many as 127 applications on a single chip. Their operating distance (read/write) is 10 cm.

ATC4096 cards offer high security standards. Indeed, the chip protects stored data using four different cryptographic keys (128/256-bit AES, 3DES, DES or Legic). 

They are ideal for all applications concerning access control, attendance control, payments and ticketing.

ATC4096 cards are available in three different materials (PVC, PETG and wood) in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

CL001 is a ‘clear disk’ tag, a special disc-shaped RFID tag consisting of a laminate or PVC layer enclosed between two transparent PET sheets. The CL001 hard tag is a semi-finished product that provides basic protection against mechanical damage. With its small size, minimal weight — it has a diameter of 20 mm, a thickness of 0.5 mm and weighs just 0.16 grams — and special design, it is ideal for embedding in a wide range of non-metal surfaces, and can be applied quickly and easily using the convenient adhesive film. Transparent and available in LF and HF, it can be customised with a logo using offset and silkscreen printing, while serial numbering can be applied using inkjet technology. 

CL002 is, a ‘clear disk’ tag, a special disc-shaped hard tag consisting of a laminate or PVC layer sandwiched between two transparent PET sheets. Semi-finished, CL002 offers basic protection against mechanical damage. Large and thin — with a diameter of 144.7 mm, 1-mm thickness and weighing 4.6 grams — its special design fits in with a wide range of non-metal surfaces, with easy application by means of the special adhesive film. Transparent, it is available in LF and HF, and can be customised with a logo using offset and silkscreen printing, while numbering is applied using inkjet technology.

CTC4096 cards are RFID cards operating in high frequency at 13.56 MHz. Compliant with the ISO 14443 A standard, they allow up to 127 applications for a single card using only one antenna, thus reducing costs. 

Equipped with a 4-kB memory and UID, they have an operating distance (read/write) of up to 25 cm, which can vary depending on the reader, environment and application.

Data storage is protected by four different encryption keys (128/256-bit AES, 3DES, DES or Legic), ensuring high security standards.

CTC4096 cards are suitable for several applications, such as access control and electronic ticketing, identification of people and merchandise, and payment systems.

They are available in PVC, PETG and wood, in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood. The chip types available for CTC4096 are the following: CTC4096-MP410, CTC4096-MM410.

EM4233 cards are contactless RFID cards operating in HF at 13.56 MHz. They comply with the ISO 15693 standard, which defines the operation of so-called vicinity cards, which are capable of reading and writing at greater distances than proximity cards.

Equipped with a 2-kilobit memory (256 bytes) and a unique identifier (UID), these cards offer high data protection against theft. This is ensured by an encryption engine implemented in the chip, combined with a random generator and a 96-bit secret key. 

EM4233 cards are ideal for access control applications (hotels and hospitality, companies, schools and universities, gyms).

They are available in different materials — PVC, PETG and wood — in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

FM11RF08 cards are contactless RFID cards operating in HF at 13.56 MHz. They transmit data in read/writemode and comply with standard ISO 14443 A. With regard to security, these cards guarantee excellent performance. Indeed, they require three-step authentication before the read/write operation.

RFID FM11RF08 cards have an anti-collision feature, which allows multiple cards to be used simultaneously in the same magnetic field. They can be read up to a distance of 10 cm, depending on the antenna geometry, reader, environment and type of application. 

They are used for ticketing in public transport and for other similar applications.FM11RF08 cards are available in three different materials (PVC, PETG and wood), in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

HT072 is an RFID hard tag made of PEEK, a thermoplastic material with reduced wear sensitivity, as well as with high impact and high temperature resistance. Rectangular in shape, it measures 41 x 29 x 9 mm, weighs 15 grams and can be screwed through four holes with a diameter of 2.3 mm on metal surfaces.  
Its physical characteristics allow it to support very high standards, reaching peak temperatures at: 

• 300°C for 100 hours;
• 280°C for 1000 hours;
• 260°C for 2000 hours;

In addition, HT072 is available in black, with UHF frequency - both European and US - and UCODE 8 chip. Therefore, due to these technical specifications, this RFID hard tag achieves large reading ranges: up to 6 metres with a fixed reader and up to 3.5 metres with a handheld device.
Both the printing and numbering of HT072 are done using laser technology.

Higgs 3 cards are contactless RFID cards operating in UHF at 868 MHz. They are manufactured according to EPC global Gen2 and ISO/IEC 18000-6C standards, and have a low power consumption during both programming and reading. In the latter case, these cards can be read over large distances, reaching up to 10 metres, depending on magnetic fields, the environment and type of application!

In addition, Higgs 3 cards can be programmed at low RF power and, in combination with customised ‘LoadImage’ commands, can be quickly configured.

As for applications, Higgs 3 cards are also well suited to industrial identification. They are available in PVC and PETG, measuring 86 mm x 54 mm x 0.86 mm, and in wood, measuring 86 mm x 54 mm x 1.3 mm.

Higgs 4 cards are contactless RFID cards operating in UHF at 868 MHz. Manufactured according to EPCglobal Gen2 and ISO/IEC 18000-6C standards, they operate at low power for reading and programming. Higgs 4 RFID cards can be read up to a distance of 11 metres, which varies depending on the antenna, environment and application.

These cards are ideal for all long-range identification operations, even in industry.

Finally, Higgs 4 cards are available in PVC and PETG with dimensions 86 mm x 54 mm x 0.86 mm and in wood with dimensions 86 mm x 54 mm x 1.3 mm.

HP001 is a flexible and ductile PVC hard tag. Round in shape, thin and lightweight — with a 15-mm diameter and 1-mm thickness, it weighs only 1 gram — HP001 can be easily glued onto metal and non-metal surfaces. It is available in white in HF with the MIFARE DESFIRE EV1 2K chip, and can be customised with logos using offset or pad printing, while serial numbering is applied using laser or inkjet printing.

HP037 is a hard tag made of PVC, a flexible and ductile thermoplastic material that is resistant to high and low temperatures. Round in shape, it has an external diameter of 146 mm and an internal diameter of 100 mm, with a 1.1-mm thickness. It can be glued onto non-metal surfaces and, on request, to metal surfaces. Available in white in LF and HF, it can be customised with a logo using offset or pad printing, while numbering can be applied using laser or inkjet technology. 

HP095 is a hard tag made of PVC, a ductile plastic featuring flexibility and an elevated resistance to high and low temperatures. Rectangular in shape, this tag measures 130 mm x 15 mm x 1 mm. It can be anchored to non-metal and metal surfaces — the latter on request — by inserting screws through the two misaligned holes on the surface. White in colour, it is available in UHF — both European and US frequencies — with the UCODE 9 chip, offering a reading distance of up to 8 metres.
HP095 can be customised with a logo using offset or pad printing. Numbering can be applied using laser or inkjet technology.

HP096 is a hard tag made of PVC, a flexible and ductile thermoplastic with elevated resistance to high and low temperatures. Rectangular in shape, it measures 100 mm x 24.5 mm x 1.5 mm and weighs 5 grams. It can be applied to non-metal surfaces and to metal surfaces on request. It is equipped with two holes for anchoring to objects using screws. White in colour and available in LF, HF and UHF, it can be customised with a logo using offset or pad printing, while numbering can be applied using laser or inkjet technology.

HP097 is a hard tag made of PVC, a flexible and ductile thermoplastic that is very resistant to high and low temperatures. Rectangular in appearance, it measures 120 mm x 20 mm x 1.1 mm. It has two side holes measuring 4 mm in diameter, and it weighs 3.8 grams. It can be applied to non-metal surfaces and is anchored using screws inserted in the two holes or with adhesive backing. Available in European and US UHF with the UCODE 9 chip, it can be read at a distance of 8 metres. White in colour, it can be customised with a logo using offset or pad printing, while numbering can be applied using laser or inkjet technology.

HP098 is a hard tag made of PVC, a flexible, ductile and temperature-resistant thermoplastic. Rectangular in shape, it measures 120 mm x 30 mm, and it has two side holes with a diameter of 4 mm. It is affixed to non-metals either by screwing through the two holes or with adhesive backing. Available in UHF, both European and US, with the HIGGS 9 chip, it is white in colour. In addition, it can be customised with logos using offset or pad printing processes, while numbering is applied using laser or inkjet technology. 

HT001 is an RFID hard tag made of PPA (polyphthalamide), a thermoplastic material with a high resistance to chemicals, moisture and very high temperatures. It also possesses good mechanical properties, which ensure excellent dimensional stability and high resistance to breakage and deformation. With its IP69 rating, HT001 is resistant to both water and dust.
The hole is used to apply the tag to non-metal surfaces using a screw or with adhesive backing.
Round in shape, it has a 50-mm diameter and can be customised using silkscreen printing and pad printing, while serial numbering can be applied using laser technology. It is black and available in LF with the EM4200 chip and in HF with the ICODE SLIX2 chip.

HT002 is an RFID hard tag made of PPA (polyphthalamide), a thermoplastic material featuring a high resistance to chemicals, moisture and very high temperatures, as well as good mechanical properties that ensure excellent dimensional stability and resistance to breakage and deformation. What’s more, the IP68 rating makes it resistant to water and dust. HT002 can be applied to non-metal surfaces by screwing through the existing hole or using an adhesive backing. Round in shape, it has a diameter of 30 mm and can be customised using silkscreen and pad printing, while serial numbering can be applied using laser technology. It is black and available in HF with the ICODE SLIX2 chip.

HT003 is an RFID hard tag made of ABS, a thermoplastic polymer featuring a high resistance to impact and both high and low temperatures. In fact, HT003 can reach a maximum temperature of 80°C during storage. This RFID hard tag is applied to non-metal surfaces by screwing through the two side holes, or using an adhesive backing. 
Rectangular in shape, it measures 78.7 mm x 30.8 mm x 9.2 mm, and is customised using silkscreen printing and pad printing. Serial numbering is applied using laser technology. It is available in dark grey in UHF, both European and US, with the HIGGS 3 chip.

HT004 is an RFID bin tag made of PA6 (nylon), a plastic material resistant to tensile stress and compression, wear, and weather. The resin coating is made of PUR or polyurethane, which features good resistance to water, salt and moisture. 
Round in shape, the bin tag is designed for application on waste-collection bins. Its standard size — 30.5 mm in diameter — makes it easy to install and integrate into plastic containers. The special screw structure prevents tampering and theft. HT004 can be customised with embossing and is available in LF — with SIC279 and EM4200 chips — in black and red, and in UHF, both European and US, with the HIGGS 3 chip, in black.

HT005 is a high performance, engineering plastic RFID hard tag that is resistant to mechanical stress, chemicals and high and low temperatures. Rectangular in shape, this tag measures 103 mm x 25 mm x 6.8 mm and can be applied to metal surfaces or other materials using screws or an adhesive backing. In particular, if the HT005 tag is affixed to metal, it can be read up to a distance of 5 metres, while if it is attached to plastic materials, it can be read up to a distance of 3 metres. In all the cases described above, the reading of the tag depends on the reader, environmental conditions and type of application. Available in UHF — both European and US — with the UCODE 8, MONZA RP6, HIGGS 9 chips, this hard tag is dark grey and light grey in colour. It can be customised using laser technology.

HT006 is an RFID hard tag made of ABS, a thermoplastic material with very good mechanical properties, such as stiffness, hardness and impact and water resistance.
Rectangular in shape, this tag is specially designed for outdoor industrial asset management. It can be used on metal and non-metal surfaces. It measures 85 mm x 20 mm x 11 mm, and can be applied using rivets, screws or adhesive. Available in UHF, both European and US, it is manufactured with the HIGGS 9 chip. It has a large reading distance which, with the European frequency and on metal surfaces, can reach up to 6 metres. On non-metals it reaches up to 6.5 metres. When the tag with US frequency is applied to metals, it can be read up to a distance of 12 m, while on non-metals the reading distance can reach up to 7 m. Note that the tag reading depends on the reader, environment and application. It is also available in grey, and can be customised using laser technology.

HT007 is an RFID hard tag made of ABS, a thermoplastic material that has a high resistance to chemicals, moisture and very high temperatures. It also possesses good mechanical properties, which ensure excellent dimensional stability and high resistance to breakage and deformation. With its IP69 rating, HT007 is resistant to water and dust. The 3 mm hole is used for application on non-metal surfaces using screws or an adhesive backing. Round in shape, it has a 30-mm diameter and can be customised using silkscreen printing and pad printing, while serial numbering can be applied using laser technology. It is available in black in LF with the EM4200 chip and in HF with the ICODE SLIX2 chip.

HT008 is an RFID hard tag made of polycarbonate, a thermoplastic material featuring elevated heat and fire resistance, hardness and impact resistance, as well as good dimensional stability.
Suitable for harsh outdoor environments, it can only be applied to metal using screws or an adhesive backing. Rectangular in shape, it measures 130.4 mm x 42 mm x 10.3 mm. It is available in black, and can be customised using laser printing.
With the HIGGS 3 chip in UHF, it reaches very large reading distances: up to 18 metres with the European frequency and up to 30 metres with the US frequency! Reading depends on the reader, the environment and the application.

HT009 is an RFID tag made of PPS, a material that is resistant to very high temperatures - up to 260°C for 30 minutes and 180°C for 120 minutes - and can be applied to metal surfaces. 
HT009 is available with the UHF chip, UCODE 8, and can be read up to 6 meters away with a fixed reader. In black color, it measures 40 x 15 x 10 mm and weighs 6 grams. 
It can be attached by screwing - because of the two ø 2.5 mm holes - or with adhesive. It also resists weather and chemical agents, dust and dirt due to its IP68 rating.

HT014 is an RFID hard tag made of PCB, an extremely corrosion- and temperature-resistant material. Ideal for interconnecting electronic components, it is snap-on and traces tubes and cables.
It has a ring shape, a diameter of ø 30 mm and is available in white.
Operating in the UHF frequency with the Ucode 8 chip, it covers high reading distances that depend on the RFID reader, the environment and the application.

HT015 is an hard tag of PCB, a very robust material that resists at corrosion and at high temperatures, and is ideal for identifying the authenticity of equipment in consumer electronics.
Round, ultra-thin and small in size - its diameter is 6 mm by 0.9 mm thick and weighing just 0.3 grams! -, this RFID tag is designed to be affixed to metal objects by means of an adhesive. 
HT015 is available in HF frequency, with the ICODE SLIX and ST25TV02K chips, in black; the logo and numbering can be applied by laser printing.

HT016 is an RFID hard tag made of 90% PCB, resistant to extremely high temperatures.
Square in shape, this tag measures 6.7 x 6.7 x 0.75 mm and weighs 0.4 grams. It can be applied by adhesive and embedded inside plastics.
It is suitable for the identification - also with NFC readers - of medical devices and instruments that need to be sterilised at high temperatures.
In fact, it peaks at 250°C for 24 hours! It is a two-colour tag - blue and black - in HF frequency with the ICODE SLIX and ST25TB02K chips.
Both logo customisation and numbering can be carried out using laser technology.

HT017 is an RFID hard tag made of nylon, ultra light material fiber, which responds well to damage due to wear, traction, chemical agents, mold and bacteria. Designed to be incorporated into metal surfaces, its shape is cylindrical, it is ultra light - it weighs only 0.25 grams! - with a diameter of 6.8 mm and a height of 4 mm. Available in yellow, this tag is personalised through laserization. In addition, the HT017 hard tag is equipped with ICODE SLIX2 chip, with HF frequency, at 13.56 MHz.

HT018 is an RFID hard tag made of nylon, a plastic material resistant to impacts and atmospheric agents. Designed for application on metal surfaces using screws, it is cylindrical in shape, very light and very small. With a diameter of 10 mm, it is 6 mm high and weighs just 0.33 grams. It is available in black, and can be customised using laser printing. 
The HT018 hard tag is produced with the MB89R118 chip in HF. 

HT020 is a ‘PCB tag’ featuring a PCB (printed circuit board) substrate, an insulating printed circuit board that connects various electronic components. It is protected by a fibreglass plate covered with a light layer of metal applied using high-temperature pressing following the lamination process.
Round, remarkably small and very light — it has a diameter of just 6.9 mm and a height of 0.94 mm, with a weight of just 0.5 grams! — HT020 is designed for smart management of projects requiring a small, discreet tag that can be applied to non-metal surfaces. It is applied using adhesive and is available in HF with the ICODE SLIX chip.

HT021 is a ‘PCB tag’ comprising a printed circuit board (PCB) substrate, an insulating printed circuit board that connects several electronic components, protected by fibreglass. This layer is covered by thin metal applied via high-temperature rolling. Finally, the tag surface features a thin polycarbonate plate.
Round in shape, small in size and lightweight —  with a diameter of just 7.9 mm, 0.9 mm in height and weighing 0.5 grams — HT021 is designed for application on metal objects  requiring non-invasive tags. It can be affixed with an adhesive backing or via an insert moulding process, and is available in HF with the ICODE SLIX chip.

HT022 is an RFID hard tag made of PA9T nylon resin, a special polyphthalamide with outstanding properties in terms of dimensional stability, fluidity and thermal, chemical and abrasion resistance. 
Round in shape, it has a slim but robust housing. With a 22-mm diameter, 3-mm thickness, and 3.1-mm central hole, HT022 is designed to withstand harsh conditions. It can be applied to metal, either using an adhesive backing or inserting a screw through the hole. Available in black in HF, with the ICODE SLIX chip, it can be customised with a logo using pad or laser printing. Numbering is applied using laser technology.

HT023 is a ‘button tag’ — it resembles a button — made of nylon, an ultra light material that is resistant to wear, tensile stress and chemicals, as well as mould and bacteria.
Round, very small and very light — with a diameter of 10 mm, it is 1.9 mm thick and weighs only 0.3 grams! — HT023 is designed for application in small spaces on non-metal objects using an adhesive backing. Available in black in HF with the ICODE SLIX chip, a logo can be applied to the button tag using pad and laser printing, while numbering is always applied using laser technology.

HT024 is an RFID hard tag made of nylon, a thin, robust material that is lightweight and extremely resistant to impacts, chemicals, mould and bacteria.
Circular in shape, it has a slim but robust housing, and is available in two sizes: a 30- or 50-mm diameter with 3-mm thickness and 5.2-mm central hole. HT024 has excellent resistance to critical working conditions and is designed for non-metal surfaces, with application via adhesive backing or screws. Available in black in HF with the ICODE SLIX chip, the tag can be customised with a logo using pad or laser printing. Numbering is applied using laser technology.

HT025 is a ‘button tag’ made of nylon, a material that is both thin and strong, while offering high resistance to impacts, chemicals and bacteria. Round, ultra thin and ultra small — 16.2 mm in diameter, 1.35 mm thick and weighing just 0.3 grams — this RFID tag is designed for application on small, non-metal objects using an adhesive backing. HT025 is available in black in HF with the ICODE SLIX chip. A logo can be applied to the button tag using pad or laser printing, while numbering is applied using laser technology.

HT028 is a ‘button tag’ — it resembles a button — made of nylon featuring robustness and resistance to impacts, chemicals, mould and bacteria.
Circular in shape, it is very small and thin, as well as being very light. It is available in two sizes: 12.4 mm in diameter with a 2-mm thickness, and 14.5 mm in diameter with a 3-mm thickness. This discreet RFID tag is designed for application on small, non-metal surfaces via an adhesive backing. HT028 is available in black in HF with the ICODE SLIX chip. In addition, it can be customised with a logo using pad or laser printing, while numbering is applied using laser technology.

HT032 is a ‘mould tag’, a special RFID tag that is embedded into the product via injection moulding during production. It is made of FPC (flexible printed circuit), a printed circuit consisting of a polyamide or polyester film which is extremely light, thin and flexible. Yellow in colour and rectangular in shape, it measures 70 mm x 11 mm x 0.6 mm. Weighing just 0.2 grams, it is designed to be embedded in non-metal objects. HT032 is resistant to very high temperatures. The HIGGS 3 chip operates in UHF (European and US frequencies) and can be read at a distance of up to 9 metres.

HT033 is an RFID hard tag made of PA6+30GF, a polyamide consisting of 30% fibreglass, which makes the nylon more rigid, resistant to compression and dimensionally stable. Rectangular in shape — measuring 52.8 mm x 44 mm x 11 mm and weighing 28 grams — this robust RFID tag is designed to be screwed onto metal objects. Available in grey in UHF (both European and US frequencies) with the UCODE 8 chip, it can be customised with a logo using pad and laser printing, while serial numbering is applied using laser technology. 

HT034 is an RFID hard tag made of a state-of-the-art engineering plastic that is resistant to chemicals and very high temperatures.
Square in shape, this tag measures 26.24 mm x 26.24 mm x 5.40 mm and weighs 6 grams. Its special design makes it ideal for application on metal surfaces in industrial settings exposed to extreme heat, reaching a maximum of 220°C!
Available in dark grey and in UHF — both European and US frequencies — with the HIGGS 3 chip, HT034 can be read up to a distance of 2.5 metres. Customisation with either a logo or numbering can be carried out using laser technology.

HT040 is an RFID hard tag made of polycarbonate, a thermoplastic material with excellent temperature and flame resistance, while also featuring hardness, impact resistance and good dimensional stability.
Rectangular in shape, this small, lightweight tag — measuring 37.7 mm x 13.7 mm x 4.85 mm and weighing 2.2 g — can be applied to all types of surfaces by means of an adhesive or cord. It is designed for IT asset management. Available in both European and US UHF, with the MONZA R6P and MONZA 4QT chips, its reading range extends up to 5 metres.
Black in colour, the customisable part of HT040 is white and can be printed using an RFID thermal transfer printer.

HT058 is an RFID hard tag made of TPV (thermoplastic vulcanisate), an elastomer combining the advantages of thermoplastic materials with those of rubber. It retains good dimensional stability at high temperatures and is resistant to tensile stress and breakage, UV aging, ozone and weather. Rectangular in shape, it measures 83 mm x 26 mm x 2.6 mm and weighs 5 grams. With its flexibility, HT058 perfectly adapts to irregular and curved surfaces, and can be attached to metal and non-metal objects using the holes provided and a Panduit cable tie. This application prevents tampering. Available in yellow, in both European and US UHF with the MONZA 4QT chip, it offers a large reading distance of up to 9 metres. It can be customised with a logo or barcode engraving, which can be applied using pad or laser printing. Numbering is applied using laser technology.

HT059 is a nylon ‘button tag’ — it resembles a button. Small and robust, it is resistant to impacts, chemicals, mould and bacteria.
Round in shape, it is exceptionally small, thin and lightweight, with a 10-mm diameter, 2.6-mm thickness and weight of 0.4 grams!
Designed for application on metal surfaces used in harsh environments, HT059 is either applied via an adhesive backing or embedded inside the item. Also available in black and in HF with the ICODE SLIX chip, it can be customised with application of a logo using pad or laser printing, while numbering can be applied using laser technology.

HT060 is an RFID hard tag made of FR4 (flame resistant), a material made of fibreglass with an epoxy resin matrix, which makes it flame retardant. It has a high electrical resistance and very low degree of moisture absorption.
Round in shape, it is available in two sizes — a 5- or 6-mm diameter, a thickness of 4 mm and a central hole of 2 mm — and is very light, weighing just 0.5 grams. Available in black and yellow, it can be either screwed or glued onto the surface or in the cavities of metal objects. It is produced in European and US UHF, with the HIGGS 3 chip.

HT061 is an RFID hard tag made of FR4 (flame resistant), a material consisting essentially of fibreglass and a flame-retardant epoxy resin. With high electrical resistance, this material absorbs very little moisture. It is also resistant to acids and alkaline substances.
Rectangular in shape, it measures 95 mm x 25 mm x 4 mm and weighs 15 grams. It is designed for application on metal surfaces by means of adhesive backing or screws using the two 4-mm diameter holes on the sides. It is resistant to very low temperatures — down to -60°C — and even very high temperatures reaching 230°C! Black or white in colour, HT061 is available with European and US UHF with the MONZA 4QT chip, and can be customised with a logo using pad or laser printing, while numbering can only be applied using laser technology.