Products

GT001 is a ‘glass tag’ made of biocompatible glass, a transparent, chemically stable and versatile material. Cylindrical in shape,  it measures 3.85 mm x 32 mm. It is uniquely designed for the needs of any contactless RFID application in pet, farm and laboratory animal management. This glass tag can be applied via ingestion — it is housed inside a ceramic envelope that is easily ingested by animals — or embedded into rings tied to the legs of birds, or even injected into the ear lobe. This highly durable tag protects the electronic components from exposure to aggressive chemicals, ensuring high readability and excellent stability at variable temperatures. Transparent in colour, it is available in LF with the SIC279 chip (HDX compatible), and can be customised using laser technology.

GT003 is a ‘glass tag’, thus made of glass, a transparent material with a stable and versatile chemical structure. Cylinder-shaped, it measures ø 4 mm x 32 mm. This tag can be embedded in non-metal surfaces. The GT003 glass tag is a ferrite-based transponder embedded in an industrial glass vial, which safely protects it from exposure to chemicals and high temperatures. Transparent, it is available in LF with the SIC279 chip, and it can be customised using laser technology.

HT016 is an RFID hard tag made of 90% PCB, resistant to extremely high temperatures.
Square in shape, this tag measures 6.7 x 6.7 x 0.75 mm and weighs 0.4 grams. It can be applied by adhesive and embedded inside plastics.
It is suitable for the identification - also with NFC readers - of medical devices and instruments that need to be sterilised at high temperatures.
In fact, it peaks at 250°C for 24 hours! It is a two-colour tag - blue and black - in HF frequency with the ICODE SLIX and ST25TB02K chips.
Both logo customisation and numbering can be carried out using laser technology.

HT019 is an RFID hard tag made of epoxy resin, a thermosetting polymer that is resistant to liquids, impacts and abrasion, extreme temperatures, weather and acids. Compliant with standard RFID readers and modules, it is ATEX certified for safe use in potentially explosive environments.
Round in shape and small in size and weight — it weighs 1 gram with a 16-mm diameter and 3-mm height! — this tag can be discreetly applied — sewn, embedded or glued — to non-metal surfaces. It is black, available in LF with the EM4200 chip and can be customised with a logo using pad printing.

HT020 is a ‘PCB tag’ featuring a PCB (printed circuit board) substrate, an insulating printed circuit board that connects various electronic components. It is protected by a fibreglass plate covered with a light layer of metal applied using high-temperature pressing following the lamination process.
Round, remarkably small and very light — it has a diameter of just 6.9 mm and a height of 0.94 mm, with a weight of just 0.5 grams! — HT020 is designed for smart management of projects requiring a small, discreet tag that can be applied to non-metal surfaces. It is applied using adhesive and is available in HF with the ICODE SLIX chip.

HT082 is an RFID hard tag made of TPU, thermoplastic polyurethane, a non-toxic polymer featuring elasticity, flexibility, oil and abrasion resistance, as well as being water and gas proof.
With its distinctive funnel shape, HT082 is a tag for animals, thus for non-metal surfaces, comprising a ‘male’ part — 100 mm x 75 mm x 13 mm — and a ‘female’ part — ø 29 mm x 23 mm. These two components are attached to the ears of cattle on breeding farms by means of an interlocking device. In addition, the HT082 weighs 16 grams and covers large reading distances: up to 6 metres when read from a fixed device, and up to 3 metres when using a handheld reader. Available in UHF — both European and US frequencies — with the UCODE 8 chip, it comes in yellow, orange and blue. Finally, numbering can be applied using laser or inkjet technology.

HT086 is a hard ceramic tag featuring low electrical conductivity and resistance to high temperatures. Rectangular, small and thin — measuring 10 mm x 5 mm x 3 mm — it is ideal for small spaces and can be glued to the surface of metal objects. HT086 is yellow and available in European and US UHF with the UCODE 8 chip.

HT090 is a ‘button tag’ made of nylon, a plastic resistant to impacts, wear and weather that is industrially hardened via overmoulding.
Round in shape, this small, lightweight ‘button tag’ — 12.4 mm by 2 mm and only 0.3 grams! — is designed for tracking small objects or for incorporation using an adhesive backing in confined spaces within items to be identified. Suitable for application on non-metal materials, it is available in LF with the EM4200 chip and comes in black. In addition, it can be customised with logos using pad or laser printing, while numbering is only applied using laser technology.

LB007 is an RFID label made of PET, a plastic material resistant to cuts, weather and high temperatures. It can tolerate up to 85°C during operation. 
Rectangular in shape, it comes in two sizes: 64 mm x 6 mm x 0.74 mm and 64 mm x 18 mm x 0.74 mm. LB007 can be applied to metal surfaces by means of the special permanent adhesive. It can be customised using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. White in colour, it is available in UHF with the UCODE 8 chip.

LB009 is a flexible and adhesive paper RFID label. It is rectangular in shape and measures 45 mm x 22 mm x 0.3 mm. It is applied to non-metal materials by means of an adhesive. It can be customised using offset or inkjet technology in colour and black and white, and thermographic printing in black and white. White in colour, LB009 is available in  UHF, with the MONZA R6 chip, and can be read over large distances, which vary depending on the environment, application and reader.

LB012 is an RFID label made of PET, a thermoplastic material featuring flexibility, resistance to cuts, weather and high temperatures. It can tolerate up to 85°C during operation. Rectangular in shape, it is covered with a layer of semi-gloss paper and measures 73 mm x 17.6 mm x 0.3 mm. LB012 is designed for adhesive application on non-metal materials that are hard to label, such as cardboard and plastic. It can be customised using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. It is white and available in  UHF with the UCODE 8 chip.

LB020 is an RFID tag made of PET, a flexible thermoplastic material that is resistant to cuts, atmospheric changes and high temperatures. Indeed, this label can tolerate up to 70°C in operation and storage. Rectangular in shape, it measures 106.5 mm x 28.5 mm; the antenna has the following dimensions: 95 mm x 12 mm. LB020 is applied to non-metal materials by means of an adhesive backing. Printing and numbering can be carried out using offset or inkjet technology for colour or black-and-white prints, and thermographic printing for black and white. It is white and available in UHF with UCODE 8 chips, with both European and US frequencies.

LB023 is an adhesive paper RFID label.
Square in shape, it measures 40 x 40 mm with an inlay of 22.5 x 22.5 mm and can be applied to non-metal surfaces, via adhesive support.
This label can be customised by offset or inkjet printing, if in colour or black and white, and with a thermographic printer, if in black
and white.
It is white in colour with UHF frequency and HIGGS3 chip.

LB032 is an adhesive RFID tag made of PET, rectangular in shape. 
It measures 64 x 28 mm and operates in the UHF frequency with the MONZA M730 chip. LB032 is applied by adhesive to non-metallic surfaces.
Offset or inkjet printing is suitable for both colour and black-and-white prints, while thermography is used specifically for black-and-white prints.

LT007 is an RFID label made of soft fabric. Rectangular in shape, it can be sewn into the garment.
Available in two sizes — 70 mm x 15 mm x 1.6 mm and 86 mm x 16 mm x 1 mm — it is white and can be customised using a thermographic printer. During washing, it resists up to 90°C for 15 minutes; during pre-drying, it resists up to 180°C for thirty minutes 200 times, while during ironing, it withstands up to 180°C for ten seconds for 200 times. Finally, when subjected to disinfection, it withstands 135°C for 20 minutes.
LT007 operates in UHF with the UCODE 7, UCODE 8, MONZA R6P chips.

LT008 is an RFID tag composed of a fabric part and a silicone part. Rectangular in shape, it is sewn into the seam of the garment to be identified. Its dimensions are 65 x 16 x 2.7 mm, its colour is white and it is customizable with thermography. LT008 can withstand up to 200 washes and can tolerate: a temperature of 90°C for fifteen minutes, drying treatment up to 160°C for thirty minutes, and ironing up to 200°C for a maximum of ten seconds. Furthermore, if this tag is inserted in the finishing tunnel, it can tolerate up to 185°C for half an hour, and if it is placed in the industrial extractor, it can withstand a pressure of 60 Bar, equivalent to 600 N/cm². 
Finally, the LT008 tag - available in UHF, with MONZA 4QT and MONZA 4E chips - has a reading distance of five metres when read by a fixed reader and two and a half metres when read by a handheld reader.

The LT009 is a fabric and silicone RFID tag with a rectangular shape. It can be sewn into the seam of the garment to be identified. Measuring 68 x 26 mm, it's white and customizable through thermography.
The LT009 can withstand up to 200 washes and operates in the following conditions: washing at 90°C for 15 minutes, drying at up to 160°C for 30 minutes, ironing at 200°C for 10 seconds, finishing tunnel up to 185°C for 30 minutes, and industrial extractor up to 60 Bar (600 N/cm²). The UHF tag is available with MONZA 4QT and MONZA 4E chips and offers a read range of five metres with a fixed reader and two and a half metres with a handheld reader.

LT010 is an RFID tag made of fabric.
Rectangular in shape, it is applied by attaching it inside the seam of the identified garment.
Its dimensions are 68 x 20 x 1.6 mm, it is white and is customisable with thermographic printing.
The LT010 label withstands a maximum of 200 washes and, at an operational level, maintains its integrity if the following conditions are met: washing at 90°C for 15 minutes, drying at 160°C for half an hour, ironing at 200°C for 10 seconds, finishing tunnel at 185°C for 30 minutes and industrial extraction at 60 Bar, which is 600 N/cm2.
LT010 has the UHF frequency and has the MONZA 4QT chip.
It can be read by a fixed RFID reader up to a distance of four and a half metres and by a handheld RFID reader up to 2.5 metres.

LT011 is a fabric RFID tag. Rectangular in appearance, it can be applied by inserting it into the seam of the garment to be identified. It measures 55 x 12 x 1.6 mm, weighs 1.1 gram, is white and can be customised with thermography.
LT011 is a label designed for industrial laundries and is resistant to up to 200 washes. Operationally, it is washable at a temperature of 90°C for fifteen minutes, in the dryer it resists at 160°C for thirty minutes and is ironable at 200°C for ten seconds. Finally, it tolerates the finishing tunnel at up to 185°C for half an hour and the industrial extractor at up to 60 Bar, i.e. 600 N/cm2.
LT011 is available with two UHF chips: MONZA 4QT and UCODE 8.
Furthermore, if this tag is read by a fixed RFID reader it reaches a distance of two metres, while if it is identified by a handheld RFID it reaches one metre.

LT012 is a fabric RFID tag. Rectangular in shape, it is applied to the garment to be identified by heat-sealing at 200°C, with a pressure of 2 Kg/cm2 for 30 seconds.
Its dimensions measure 70 x 15 x 1.6 mm and its weight is equivalent to 1.3 grams. Available in white, the customisation of this label is done by thermographic printing technique.
The LT012 was created for industrial laundries and has specific features that make it ideal for all typical operations in this sector.
Its life cycle lasts up to 200 washes, during which it withstands a temperature of 90°C for fifteen minutes. Then, when subjected to drying it tolerates up to 160°C for half an hour and ironing is applicable up to 200°C for 10 seconds. Finally, it withstands up to 185°C for half an hour inside the finishing tunnel and withstands industrial stretching up to 60 Bar, i.e. 600 N/cm2.
The LT012 is available in the catalogue with the UHF chips: MONZA 4QT, UCODE 7, UCODE 8 and UCODE 9.
Furthermore, it can be read by a fixed RFID reader up to 5 metres, and by a handheld RFID reader up to a distance of two and a half metres.

HP034 is an RFID key fob made of PVC, a ductile thermoplastic material resistant to both very high and low temperatures. Designed with a hole for a string and a distinctive teardrop shape, the entire surface can be customised using offset and pad printing, while serial numbering can be applied using laser and inkjet techniques. HP034 is available in LF, HF and combo (LF+HF) frequencies and comes in white.

HP035 is an RFID key fob made of PVC, whose thermoplastic properties ensure good resistance to very high and low temperatures. It features two rectangular holes to easily insert a ribbon or string. It is rectangular in shape with rounded edges. The entire surface can be customised using offset and pad printing techniques. Serial numbering can be applied using laser or inkjet printing. HP035 can be ordered in LF, HF and combo (LF+HF) frequencies and comes in white.

HP038 is an RFID key fob made of PVC, a ductile thermoplastic material with high resistance to very high and low temperatures. Designed with a hole for a string, it is rectangular in shape and the entire surface can be customised using offset or pad printing and epoxy printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies and comes in white.

HP039 is an RFID key fob made of PVC, a thermoplastic material distinguished by its elasticity and resistance to very low and very high temperatures. 
Rectangular in shape, it has a lanyard hole and can be customised over the entire surface using offset, pad printing and epoxy printing techniques. While serialisation is possible with laser and inkjet.
It is available in white, LF, HF and combo (LF+HF) frequencies.

KF001 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties such as good rigidity and hardness, resistance to high and low temperatures, impacts and scratches. KF001 features a teardrop design and a double metal hook-and-loop fastener for dual attachment. It can be customised using silkscreen printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF (with a EM4200, ATA5577 or T5567, EM4550 or TITAN chip) and HF (with the MIFARE CLASSIC 1K EV1 S50 chip) in the following colours: grey, yellow, red, green, purple and blue.

KF002 is an RFID key fob made of ABS, a thermoplastic material featuring good rigidity, high and low temperature resistance, impact resistance and water resistance. It shows refined workmanship on both the front and back.
With a metal ring clasp and teardrop design, KF002 can be customised with silkscreen and pad printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies, and in the following colours: blue, black, green, grey, yellow, red and white. 

KF003 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties such as good rigidity and hardness, impact resistance and water resistance. With a metal ring and teardrop shape, it is available in two options, one more resistant to high temperatures (-T) and the other less resistant (-R). It can be customised using screen and pad printing, while serial numbering can be applied using laser technology. KF003 is available in LF, HF and combo (LF+HF) frequencies, in the following colours: blue, black, green, grey, yellow, red and orange. It can also be ordered in combinations with a white cover and housing in black, red, yellow, green or blue.

KF008 is an RFID key fob made of PA6 (nylon), a plastic material with excellent mechanical properties. Resistant to tensile stress and compression, it is also wear-resistant and weatherproof. Teardrop-shaped and featuring a lanyard hole, it can be customised using silkscreen printing, while serial numbering can be applied using laser and inkjet technology. KF008 is available in LF, HF and combined (LF+HF) frequencies and in the following colours: black, white, red, blue, green, yellow and orange.

KF009 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties such as rigidity, hardness, impact resistance and water resistance. Rectangular in shape, it has a metal ring and customisable label housed within a transparent body. Available in UHF — European and US — with the HIGGS 3 chip, KF009 reads up to a distance of 70 cm. KF009 can be customised using offset or silkscreen printing, while serial numbering is applied using laser or inkjet technology.

KF010 is an RFID key fob with an ABS housing and stainless steel frame, which makes it rigid and durable, resistant to both water and high temperatures.Featuring a refined rounded shape, it has a ring built into the body of the key fob, and can be customised using silkscreen and pad printing. serial numbering can be applied using laser and inkjet technology. It is available in LF, HF and combo (LF+HF) frequencies, in the following colours: black, white and blue.

KF011 is a fully waterproof and durable faux leather RFID key fob with a metal ring. With its exclusive and sophisticated rectangular design, it can be customised using pad printing, while serial numbering can be applied using laser technology. KF011 is available in elegant colours: dark purple, dark blue, light blue, red, white, grey and black, in LF (chips: EM4200, EM4550 or TITAN, ATA5577 or T5567, HITAG2), HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE CLASSIC 4K EV1 S70,  MIFARE DESFIRE EV2 4K, MIFARE DESFIRE EV3 2K/4K/8K, MIM1024/PRIME, NTAG213) and COMBO LF+HF (chips: MIFARE CLASSIC 1K EV1 S50 + EM4200, MIFARE CLASSIC 1K EV1 S50 + T5567, MIFARE DESFIRE 4K/8K EV3 + EM4200, MIFARE DESFIRE 4K EV3 + ATA5577) frequencies.

KF012 is an RFID key fob made of PVC, a flexible and ductile thermoplastic material with high resistance to very high and low temperatures. Designed with a hole for a string, it is rectangular and the entire surface can be customised using offset and pad printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies and comes in white.

KF013 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties, such as good rigidity and hardness, impact resistance and water resistance. Designed with a hole for a string, it has a fresh and lively teardrop design enhanced by bright, attractive colours in the following combinations: black and white, white and grey, white and blue, white and purple, white and red, white and orange, white and pink, white and green, white and yellow. In addition, KF013 can be customised using inkjet printing, and serial numbering can be applied using laser technology. It is available in LF (chip: ATA5577 or T5567, EM4200) and HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE DESFIRE EV2 2K/4K/8K).

KF014 is an RFID key fob made of nylon and metal, materials that withstand high and low temperatures, chemicals and mechanical stress. Rectangular in shape, with a ring closure, it combines the robustness of the upper metal housing with the elegance of the matt texture. It can be customised using pad printing, while serial numbering can be applied using laser technology. RFID key fob KF014 is available in colours: white, black, grey, red, dark blue, light blue, purple. It works at LF (chips: EM4200, EM4550 or TITAN, ATA5577 or T5567, HITAG2), HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE CLASSIC 4K EV1 S70,  MIFARE DESFIRE EV2 4K, MIFARE DESFIRE EV3 2K/4K/8K, MIM1024/PRIME, NTAG213) and COMBO LF+HF (chips: MIFARE CLASSIC 1K EV1 S50 + EM4200, MIFARE CLASSIC 1K EV1 S50 + T5567, MIFARE DESFIRE 4K/8K EV3 + EM4200, MIFARE DESFIRE 4K EV3 + ATA5577) frequencies.

WB101 is a unisex RFID wristband made of PET, a material that offers excellent resistance to high temperatures, weathering, cuts and abrasions. It has a snap fastener. The dial and strap can be customised using offset printing, while serial numbering can be applied using thermographic printing; barcodes or QR/data matrix codes can also be printed. Available in HF, with a MIFARE CLASSIC 1K EV1 S50 chip; available in white.

WT001 is a wet inlay made of PET, a flexible, cut- and weather-resistant thermoplastic material. Rectangular in shape, it measures 100 mm x 12 mm x 0.10 mm and can be applied to non-metal surfaces by means of an adhesive backing. Transparent in colour, it is available in UHF with the HIGGS 3 chip.

WT002 is a wet inlay made of PET. It is flexible, cut- and weather-resistant.  Rectangular in shape, it measures 36 mm x 22 mm x 0.23 mm and can be applied to non-metal materials by means of a special adhesive. It has a transparent surface, and is available in UHF with the MONZA R5 chip.

WT003 is a wet inlay made of PET, a material featuring flexibility and resistance to cuts and thermal shocks. Rectangular in shape, it is adhesive and flexible, andmeasures 64 mm x 6 mm.
It has a transparent surface, is applied using an adhesive and is suitable for non-metal materials. WT003 is available in UHF with the UCODE 8 chip in both European and US frequencies.

WT004 is a wet inlay made of PET, a flexible thermoplastic material resistant to cuts and thermal shock. Round in shape, it has a diameter of 22 mm and a thickness of 0.2 mm. It is transparent and is applied to non-metal surfaces by means of a special adhesive. This wet inlayis available in HF with the NTAG213 chip.

WT005 is a wet inlay made of PET, a type of thermoplastic material featuring flexibility, cut resistance and resistance to temperature changes.
Square in shape, it is adhesive and flexible; it measures 48 mm x 48 mm, and has a transparent surface. Suitable for non-metal surfaces, it is available in UHF with a KX2005XG-B chip (compatible with MONZA 4QT).