-
RFID Key Fobs KF007
€0.00KF007 is an RFID key fob made of PA6, a nylon with excellent mechanical properties, which is resistant to traction and compression, wear and atmospheric agents. With its characteristic teardrop shape and smooth surface, this keyfob has a hole for inserting a lanyard.
KF007 can be personalised using pad printing, while serial numbering can be applied using laser, inkjet and UV inkjet technologies. It is available in LF, HF, UHF and combined LF+HF and HF+UHF frequencies, in ten colours: red, orange, yellow, green, blue, navy blue, purple, white, grey, black.
-
RFID key fobs KF008
€0.00KF008 is an RFID key fob made of PA6 (nylon), a plastic material with excellent mechanical properties. Resistant to tensile stress and compression, it is also wear-resistant and weatherproof. Teardrop-shaped and featuring a lanyard hole, it can be customised using silkscreen printing, while serial numbering can be applied using laser and inkjet technology. KF008 is available in LF, HF and combined (LF+HF) frequencies and in the following colours: black, white, red, blue, green, yellow and orange.
-
RFID key fobs KF009
€0.00KF009 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties such as rigidity, hardness, impact resistance and water resistance. Rectangular in shape, it has a metal ring and customisable label housed within a transparent body. Available in UHF — European and US — with the HIGGS 3 chip, KF009 reads up to a distance of 70 cm. KF009 can be customised using offset or silkscreen printing, while serial numbering is applied using laser or inkjet technology.
-
RFID key fobs KF010
€0.00KF010 is an RFID key fob with an ABS housing and stainless steel frame, which makes it rigid and durable, resistant to both water and high temperatures.Featuring a refined rounded shape, it has a ring built into the body of the key fob, and can be customised using silkscreen and pad printing. serial numbering can be applied using laser and inkjet technology. It is available in LF, HF and combo (LF+HF) frequencies, in the following colours: black, white and blue.
-
RFID key fobs KF011
€0.00KF011 is a fully waterproof and durable faux leather RFID key fob with a metal ring. With its exclusive and sophisticated rectangular design, it can be customised using pad printing, while serial numbering can be applied using laser technology. KF011 is available in elegant colours: dark purple, dark blue, light blue, red, white, grey and black, in LF (chips: EM4200, EM4550 or TITAN, ATA5577 or T5567, HITAG2), HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE CLASSIC 4K EV1 S70, MIFARE DESFIRE EV2 4K, MIFARE DESFIRE EV3 2K/4K/8K, MIM1024/PRIME, NTAG213) and COMBO LF+HF (chips: MIFARE CLASSIC 1K EV1 S50 + EM4200, MIFARE CLASSIC 1K EV1 S50 + T5567, MIFARE DESFIRE 4K/8K EV3 + EM4200, MIFARE DESFIRE 4K EV3 + ATA5577) frequencies.
-
RFID key fobs KF012
€0.00KF012 is an RFID key fob made of PVC, a flexible and ductile thermoplastic material with high resistance to very high and low temperatures. Designed with a hole for a string, it is rectangular and the entire surface can be customised using offset and pad printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies and comes in white.
-
RFID key fobs KF013
€0.00KF013 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties, such as good rigidity and hardness, impact resistance and water resistance. Designed with a hole for a string, it has a fresh and lively teardrop design enhanced by bright, attractive colours in the following combinations: black and white, white and grey, white and blue, white and purple, white and red, white and orange, white and pink, white and green, white and yellow. In addition, KF013 can be customised using inkjet printing, and serial numbering can be applied using laser technology. It is available in LF (chip: ATA5577 or T5567, EM4200) and HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE DESFIRE EV2 2K/4K/8K).
-
RFID Key Fobs KF014
€0.00KF014 is an RFID key fob made of nylon and metal, materials that withstand high and low temperatures, chemicals and mechanical stress. Rectangular in shape, with a ring closure, it combines the robustness of the upper metal housing with the elegance of the matt texture. It can be customised using pad printing, while serial numbering can be applied using laser technology. RFID key fob KF014 is available in colours: white, black, grey, red, dark blue, light blue, purple. It works at LF (chips: EM4200, EM4550 or TITAN, ATA5577 or T5567, HITAG2), HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE CLASSIC 4K EV1 S70, MIFARE DESFIRE EV2 4K, MIFARE DESFIRE EV3 2K/4K/8K, MIM1024/PRIME, NTAG213) and COMBO LF+HF (chips: MIFARE CLASSIC 1K EV1 S50 + EM4200, MIFARE CLASSIC 1K EV1 S50 + T5567, MIFARE DESFIRE 4K/8K EV3 + EM4200, MIFARE DESFIRE 4K EV3 + ATA5577) frequencies.
-
WT001 RFID wet inlay
€0.00WT001 is a wet inlay made of PET, a flexible, cut- and weather-resistant thermoplastic material. Rectangular in shape, it measures 100 mm x 12 mm x 0.10 mm and can be applied to non-metal surfaces by means of an adhesive backing. Transparent in colour, it is available in UHF with the HIGGS 3 chip.
-
WT002 RFID wet inlay
€0.00WT002 is a wet inlay made of PET. It is flexible, cut- and weather-resistant. Rectangular in shape, it measures 36 mm x 22 mm x 0.23 mm and can be applied to non-metal materials by means of a special adhesive. It has a transparent surface, and is available in UHF with the MONZA R5 chip.
-
WT003 RFID wet inlay
€0.00WT003 is a wet inlay made of PET, a material featuring flexibility and resistance to cuts and thermal shocks. Rectangular in shape, it is adhesive and flexible, andmeasures 64 mm x 6 mm.
It has a transparent surface, is applied using an adhesive and is suitable for non-metal materials. WT003 is available in UHF with the UCODE 8 chip in both European and US frequencies. -
WT004 RFID wet inlay
€0.00WT004 is a wet inlay made of PET, a flexible thermoplastic material resistant to cuts and thermal shock. Round in shape, it has a diameter of 22 mm and a thickness of 0.2 mm. It is transparent and is applied to non-metal surfaces by means of a special adhesive. This wet inlayis available in HF with the NTAG213 chip.
-
WT005 RFID wet inlay
€0.00WT005 is a wet inlay made of PET, a type of thermoplastic material featuring flexibility, cut resistance and resistance to temperature changes.
Square in shape, it is adhesive and flexible; it measures 48 mm x 48 mm, and has a transparent surface. Suitable for non-metal surfaces, it is available in UHF with a KX2005XG-B chip (compatible with MONZA 4QT). -
WT006 RFID wet inlay
€0.00WT006 is a wet inlay made of PET, a flexible thermoplastic material that is resistant to cutting and thermal shock.
Rectangular in shape, it measures 86 x 46 mm and has an inlay of 75 x 45 mm. Transparent in colour, it can be applied to non-metallic surfaces by means of adhesive.
This wet inlay is an NFC tag available in the HF frequency, with the ICODE SLIX chip.
Toggle Nav
Search
Language
Products
Configure
