Products

LB006 is a flexible RFID label made of PP (polypropylene), a ductile thermoplastic material with a high resistance to impacts and high temperatures. This label can tolerate up to 100°C during operation! 
Rectangular in shape, it measures 110 mm x 38 mm x 0.35 mm and is suitable for application on glass and other non-metal surfaces via an adhesive backing. Printing and numbering are applied using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. LB006 is white and available in UHF, with MONZA 4E and MONZA 4QT chips. The reading distance is large and depends on the reader, environment and application.

LB008 is a flexible and adhesive paper RFID label. Rectangular in shape, it measures 85 mm x 54 mm x 0.43 mm and can be applied to non-metal surfaces. Printing and serial numbering are applied using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. White in colour, it is available in HF with the  MIFARE CLASSIC 1K EV1 S50 chip.

LB009 is a flexible and adhesive paper RFID label. It is rectangular in shape and measures 45 mm x 22 mm x 0.3 mm. It is applied to non-metal materials by means of an adhesive. It can be customised using offset or inkjet technology in colour and black and white, and thermographic printing in black and white. White in colour, LB009 is available in  UHF, with the MONZA R6 chip, and can be read over large distances, which vary depending on the environment, application and reader.

LB010 is an RFID label made of PP (polypropylene) rectangular in shape, which measures 9 x 6 mm.
Applicable by adhesive on glass and non-metallic surfaces, it can be customised by offset or inkjet, in colour and black and white, and by thermography, also in black and white. LB010 operates in the HF frequency with the RF81 chip and is available in white.

LB011 is a flexible and adhesive paper RFID label. Rectangular in shape, it measures 110 mm x 35 mm x 0.25 mm, while the antenna inlay is 100 mm x 12 mm. It is suitable for application on non-metal materials with an adhesive backing. Printing and numbering are carried out using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. White in colour, it operates in the UHF band with the HIGGS 3 chip.

LB013 is a flexible and adhesive paper RFID label. Rectangular in shape, it measures 54 mm x 34 mm x 0.2 mm, while the antenna inlay is 50 mm x 30 mm. It is ideal for application on non-metals by means of an adhesive backing. It can be customised using offset or inkjet technology in colour and black and white, and thermographic printing in black and white. White in colour, it is available in UHF with the MONZA R6P chip, with a reading distance that can be adjusted depending on the environment, reader and application.

LB014 is an RFID label made of PET, a flexible, cut- and weather-resistant thermoplastic material. It is rectangular and measures 54 mm x 34 mm x 0.24 mm. LB014 can be applied to non-metal surfaces using a special adhesive. Printing and serial numbering are applied using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black and white only. White in colour, it is available in UHF with the UCODE 7 chip. The reading distance depends on the environment, reader and application.

LB015 is an RFID label made of PET, a flexible plastic that is resistant to cut and weather. Rectangular in shape, it measures 44 mm x 19 mm x 0.2 mm and can be applied to non-metal surfaces using a special adhesive. Printing and serial numbering can be performed using offset or inkjet technology in colour and black and white, and thermographic printing for black and white only. LB015 is white and available in UHF with the UCODE 8 chip.

LB016 is a flexible and adhesive RFID label made of coated paper. Round in shape, it has a diameter of 17 mm, while the engraved aluminium inlay or antenna has a diameter of 15 mm. It can be applied to non-metal surfaces and resists at high temperatures of up to 80°C during operation. It can be customised using offset or inkjet technology in colour and black and white, and thermographic printing in black and white. White in colour, this label is available in HF with the FM11RF08 chip, which can be read at a distance of 1–5 cm.

LB017 is a flexible and adhesive paper RFID label.
Rectangular in shape, it measures 20 mm x 10 mm. Ideal for all types of non-metal surfaces, it can be customised using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints only. LB017 is available in white and in HF with the FM11RF08 chip, which can be read up to a distance of 5 cm.

LB018 is an RFID label made of PVC, a ductile and flexible thermoplastic material.
Round in shape, it has a diameter of 30 mm and is suitable for non-metal surfaces, with application using a special adhesive. It can be customised using offset or inkjet technology for colour or black-and-white prints, or thermographic printing for black-and-white prints only. LB018 is white and available in HF with the MIFARE CLASSIC 1K EV1 S50 chip.

LB019 is a flexible and adhesive coated paper RFID label.
Round in shape, it has a diameter of 30 mm, while the engraved aluminium inlay or antenna has a diameter of 27 mm. It can be applied to non-metal surfaces and is resistant to high temperatures. Indeed, it can tolerate up to 80°C during operation. White in colour, it is available in HF. With the MIFARE CLASSIC 1K EV1 S50 chip, it is suitable for proximity readings from 3 to 6 cm. 

LB020 is an RFID tag made of PET, a flexible thermoplastic material that is resistant to cuts, atmospheric changes and high temperatures. Indeed, this label can tolerate up to 70°C in operation and storage. Rectangular in shape, it measures 106.5 mm x 28.5 mm; the antenna has the following dimensions: 95 mm x 12 mm. LB020 is applied to non-metal materials by means of an adhesive backing. Printing and numbering can be carried out using offset or inkjet technology for colour or black-and-white prints, and thermographic printing for black and white. It is white and available in UHF with UCODE 8 chips, with both European and US frequencies.

LB021 is an adhesive RFID tag made of coated paper.
Rectangular in shape, it measures 73 mm x 17 mm, while the antenna inlay is 70 mm x 14 mm.
LB021 can be applied to non-metals with an adhesive backing. It can be customised using offset or inkjet technology for colour or black-and-white prints, and thermographic printing for black and white. It is white and available in UHF, with the MONZA M730 chip.

LB022 is an adhesive RFID label made of coated paper. 
Rectangular in shape, it measures 60 mm x 32 mm and features a high temperature resistance, high solvent resistance, high viscosity relative to HSE parameters, and low styrene emissions (LSE).
LB022 can be applied to all metal and non-metal surfaces by means of an adhesive backing. 
This label can be customised using offset or inkjet technology for colour or black-and-white prints, and thermographic printing for black-and-white prints. It is white and operates in HF with a NTAG213 chip, an NFC Forum Type 2 technology.

LB024 is a coated paper adhesive RFID label, rectangular in shape. It measures 54 x 34 mm, the inlay measures 50 x 30 mm.
It reads up to 8 metres, guarantees excellent performance operating in the UHF frequency with the UCODE 9 chip.
LB024 is applied to non-metal surfaces, via adhesive.
This label can be customised with offset or inkjet printing, if in colour or black and white, and with a thermographic printer, if in black and white.

LB025 is an adhesive RFID label in synthetic paper or in PET, rectangular in shape. It measures 53 x 33 mm, the inlay measures 50 x 30 mm.
LB025  can  be  applied  to non-metallic surfaces by means of the adhesive. In addition, it can be customised with offset or inkjet, for colour and black and white prints, and with thermography, for black and white prints. White, it is available in the UHF frequency, with the UCODE8 chip.

LB027 is a synthetic paper RFID tag available in UHF with the HIGGS-EC chip.
It measures 100 x 32 mm and is readable up to 10 m with a fixed reader. 
The special feature of the LB027 RFID smart label is its tamper-proof design.
In addition, it can be applied to non-metallic surfaces, more precisely glass, by means of an adhesive.
LB027 can be customised by offset or inkjet, for colour and black and white prints, and by thermography, for black and white prints.

LB028 is a PET adhesive RFID label, rectangular in shape.
It measures 85 x 65 mm, with an inlay of 70 x 17 mm. 
It reads up to 6 meters, ensures excellent performance by operating in the UHF frequency with UCODE 9 and HIGGS 9 chips. 
LB028 is applied by adhesive to glass and non-metallic surfaces.
Printing and numbering is done by offset or inkjet, for color and black-and-white prints, and by thermography, for black-and-white prints.

LB029, is an adhesive RFID tag made of PET, round. 
Due to its special strength and thickness, it has a high resistance to water and environmental stress. 
It has a diameter of 25 mm, its inlay measures 21 mm and is applied to non-metallic surfaces by means of adhesive. 
LB029 is an NFC label that operates at a frequency of 13.56 Mhz in HF, High Frequency, with the NTAG 213 chip.
LB029 can be printed using offset or inkjet techniques in both color and black and white, and with thermography only in black and white.

LB031 is a square RFID tag made of coated paper. It measures 25 x 25 mm and can be applied by adhesive to non-metallic surfaces.
Printing and numbering is done by offset and inkjet for colour or black-and-white prints, and by thermography for black-and-white only.
LB031 is a white NFC tag, with HF frequency and NTAG213 chip.

HP034 is an RFID key fob made of PVC, a ductile thermoplastic material resistant to both very high and low temperatures. Designed with a hole for a string and a distinctive teardrop shape, the entire surface can be customised using offset and pad printing, while serial numbering can be applied using laser and inkjet techniques. HP034 is available in LF, HF and combo (LF+HF) frequencies and comes in white.

HP035 is an RFID key fob made of PVC, whose thermoplastic properties ensure good resistance to very high and low temperatures. It features two rectangular holes to easily insert a ribbon or string. It is rectangular in shape with rounded edges. The entire surface can be customised using offset and pad printing techniques. Serial numbering can be applied using laser or inkjet printing. HP035 can be ordered in LF, HF and combo (LF+HF) frequencies and comes in white.

HP038 is an RFID key fob made of PVC, a ductile thermoplastic material with high resistance to very high and low temperatures. Designed with a hole for a string, it is rectangular in shape and the entire surface can be customised using offset or pad printing and epoxy printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies and comes in white.

HP039 is an RFID key fob made of PVC, a thermoplastic material distinguished by its elasticity and resistance to very low and very high temperatures. 
Rectangular in shape, it has a lanyard hole and can be customised over the entire surface using offset, pad printing and epoxy printing techniques. While serialisation is possible with laser and inkjet.
It is available in white, LF, HF and combo (LF+HF) frequencies.

KF001 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties such as good rigidity and hardness, resistance to high and low temperatures, impacts and scratches. KF001 features a teardrop design and a double metal hook-and-loop fastener for dual attachment. It can be customised using silkscreen printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF (with a EM4200, ATA5577 or T5567, EM4550 or TITAN chip) and HF (with the MIFARE CLASSIC 1K EV1 S50 chip) in the following colours: grey, yellow, red, green, purple and blue.

KF002 is an RFID key fob made of ABS, a thermoplastic material featuring good rigidity, high and low temperature resistance, impact resistance and water resistance. It shows refined workmanship on both the front and back.
With a metal ring clasp and teardrop design, KF002 can be customised with silkscreen and pad printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies, and in the following colours: blue, black, green, grey, yellow, red and white. 

KF003 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties such as good rigidity and hardness, impact resistance and water resistance. With a metal ring and teardrop shape, it is available in two options, one more resistant to high temperatures (-T) and the other less resistant (-R). It can be customised using screen and pad printing, while serial numbering can be applied using laser technology. KF003 is available in LF, HF and combo (LF+HF) frequencies, in the following colours: blue, black, green, grey, yellow, red and orange. It can also be ordered in combinations with a white cover and housing in black, red, yellow, green or blue.

KF008 is an RFID key fob made of PA6 (nylon), a plastic material with excellent mechanical properties. Resistant to tensile stress and compression, it is also wear-resistant and weatherproof. Teardrop-shaped and featuring a lanyard hole, it can be customised using silkscreen printing, while serial numbering can be applied using laser and inkjet technology. KF008 is available in LF, HF and combined (LF+HF) frequencies and in the following colours: black, white, red, blue, green, yellow and orange.

KF009 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties such as rigidity, hardness, impact resistance and water resistance. Rectangular in shape, it has a metal ring and customisable label housed within a transparent body. Available in UHF — European and US — with the HIGGS 3 chip, KF009 reads up to a distance of 70 cm. KF009 can be customised using offset or silkscreen printing, while serial numbering is applied using laser or inkjet technology.

KF010 is an RFID key fob with an ABS housing and stainless steel frame, which makes it rigid and durable, resistant to both water and high temperatures.Featuring a refined rounded shape, it has a ring built into the body of the key fob, and can be customised using silkscreen and pad printing. serial numbering can be applied using laser and inkjet technology. It is available in LF, HF and combo (LF+HF) frequencies, in the following colours: black, white and blue.

KF011 is a fully waterproof and durable faux leather RFID key fob with a metal ring. With its exclusive and sophisticated rectangular design, it can be customised using pad printing, while serial numbering can be applied using laser technology. KF011 is available in elegant colours: dark purple, dark blue, light blue, red, white, grey and black, in LF (chips: EM4200, EM4550 or TITAN, ATA5577 or T5567, HITAG2), HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE CLASSIC 4K EV1 S70,  MIFARE DESFIRE EV2 4K, MIFARE DESFIRE EV3 2K/4K/8K, MIM1024/PRIME, NTAG213) and COMBO LF+HF (chips: MIFARE CLASSIC 1K EV1 S50 + EM4200, MIFARE CLASSIC 1K EV1 S50 + T5567, MIFARE DESFIRE 4K/8K EV3 + EM4200, MIFARE DESFIRE 4K EV3 + ATA5577) frequencies.

KF012 is an RFID key fob made of PVC, a flexible and ductile thermoplastic material with high resistance to very high and low temperatures. Designed with a hole for a string, it is rectangular and the entire surface can be customised using offset and pad printing, while serial numbering can be applied using laser and inkjet techniques. It is available in LF, HF and combo (LF+HF) frequencies and comes in white.

KF013 is an RFID key fob made of ABS, a thermoplastic material with excellent mechanical properties, such as good rigidity and hardness, impact resistance and water resistance. Designed with a hole for a string, it has a fresh and lively teardrop design enhanced by bright, attractive colours in the following combinations: black and white, white and grey, white and blue, white and purple, white and red, white and orange, white and pink, white and green, white and yellow. In addition, KF013 can be customised using inkjet printing, and serial numbering can be applied using laser technology. It is available in LF (chip: ATA5577 or T5567, EM4200) and HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE DESFIRE EV2 2K/4K/8K).

KF014 is an RFID key fob made of nylon and metal, materials that withstand high and low temperatures, chemicals and mechanical stress. Rectangular in shape, with a ring closure, it combines the robustness of the upper metal housing with the elegance of the matt texture. It can be customised using pad printing, while serial numbering can be applied using laser technology. RFID key fob KF014 is available in colours: white, black, grey, red, dark blue, light blue, purple. It works at LF (chips: EM4200, EM4550 or TITAN, ATA5577 or T5567, HITAG2), HF (chips: MIFARE CLASSIC 1K EV1 S50, MIFARE CLASSIC 4K EV1 S70,  MIFARE DESFIRE EV2 4K, MIFARE DESFIRE EV3 2K/4K/8K, MIM1024/PRIME, NTAG213) and COMBO LF+HF (chips: MIFARE CLASSIC 1K EV1 S50 + EM4200, MIFARE CLASSIC 1K EV1 S50 + T5567, MIFARE DESFIRE 4K/8K EV3 + EM4200, MIFARE DESFIRE 4K EV3 + ATA5577) frequencies.

WT001 is a wet inlay made of PET, a flexible, cut- and weather-resistant thermoplastic material. Rectangular in shape, it measures 100 mm x 12 mm x 0.10 mm and can be applied to non-metal surfaces by means of an adhesive backing. Transparent in colour, it is available in UHF with the HIGGS 3 chip.

WT002 is a wet inlay made of PET. It is flexible, cut- and weather-resistant.  Rectangular in shape, it measures 36 mm x 22 mm x 0.23 mm and can be applied to non-metal materials by means of a special adhesive. It has a transparent surface, and is available in UHF with the MONZA R5 chip.

WT003 is a wet inlay made of PET, a material featuring flexibility and resistance to cuts and thermal shocks. Rectangular in shape, it is adhesive and flexible, andmeasures 64 mm x 6 mm.
It has a transparent surface, is applied using an adhesive and is suitable for non-metal materials. WT003 is available in UHF with the UCODE 8 chip in both European and US frequencies.

WT004 is a wet inlay made of PET, a flexible thermoplastic material resistant to cuts and thermal shock. Round in shape, it has a diameter of 22 mm and a thickness of 0.2 mm. It is transparent and is applied to non-metal surfaces by means of a special adhesive. This wet inlayis available in HF with the NTAG213 chip.

WT005 is a wet inlay made of PET, a type of thermoplastic material featuring flexibility, cut resistance and resistance to temperature changes.
Square in shape, it is adhesive and flexible; it measures 48 mm x 48 mm, and has a transparent surface. Suitable for non-metal surfaces, it is available in UHF with a KX2005XG-B chip (compatible with MONZA 4QT).

WT006 is a wet inlay made of PET, a flexible thermoplastic material that is resistant to cutting and thermal shock.
Rectangular in shape, it measures 86 x 46 mm and has an inlay of 75 x 45 mm. Transparent in colour, it can be applied to non-metallic surfaces by means of adhesive.
This wet inlay is an NFC tag available in the HF frequency, with the ICODE SLIX chip.