Products

HT021 is a ‘PCB tag’ comprising a printed circuit board (PCB) substrate, an insulating printed circuit board that connects several electronic components, protected by fibreglass. This layer is covered by thin metal applied via high-temperature rolling. Finally, the tag surface features a thin polycarbonate plate.
Round in shape, small in size and lightweight —  with a diameter of just 7.9 mm, 0.9 mm in height and weighing 0.5 grams — HT021 is designed for application on metal objects  requiring non-invasive tags. It can be affixed with an adhesive backing or via an insert moulding process, and is available in HF with the ICODE SLIX chip.

HT022 is an RFID hard tag made of PA9T nylon resin, a special polyphthalamide with outstanding properties in terms of dimensional stability, fluidity and thermal, chemical and abrasion resistance. 
Round in shape, it has a slim but robust housing. With a 22-mm diameter, 3-mm thickness, and 3.1-mm central hole, HT022 is designed to withstand harsh conditions. It can be applied to metal, either using an adhesive backing or inserting a screw through the hole. Available in black in HF, with the ICODE SLIX chip, it can be customised with a logo using pad or laser printing. Numbering is applied using laser technology.

HT023 is a ‘button tag’ — it resembles a button — made of nylon, an ultra light material that is resistant to wear, tensile stress and chemicals, as well as mould and bacteria.
Round, very small and very light — with a diameter of 10 mm, it is 1.9 mm thick and weighs only 0.3 grams! — HT023 is designed for application in small spaces on non-metal objects using an adhesive backing. Available in black in HF with the ICODE SLIX chip, a logo can be applied to the button tag using pad and laser printing, while numbering is always applied using laser technology.

HT024 is an RFID hard tag made of nylon, a thin, robust material that is lightweight and extremely resistant to impacts, chemicals, mould and bacteria.
Circular in shape, it has a slim but robust housing, and is available in two sizes: a 30- or 50-mm diameter with 3-mm thickness and 5.2-mm central hole. HT024 has excellent resistance to critical working conditions and is designed for non-metal surfaces, with application via adhesive backing or screws. Available in black in HF with the ICODE SLIX chip, the tag can be customised with a logo using pad or laser printing. Numbering is applied using laser technology.

HT025 is a ‘button tag’ made of nylon, a material that is both thin and strong, while offering high resistance to impacts, chemicals and bacteria. Round, ultra thin and ultra small — 16.2 mm in diameter, 1.35 mm thick and weighing just 0.3 grams — this RFID tag is designed for application on small, non-metal objects using an adhesive backing. HT025 is available in black in HF with the ICODE SLIX chip. A logo can be applied to the button tag using pad or laser printing, while numbering is applied using laser technology.

HT028 is a ‘button tag’ — it resembles a button — made of nylon featuring robustness and resistance to impacts, chemicals, mould and bacteria.
Circular in shape, it is very small and thin, as well as being very light. It is available in two sizes: 12.4 mm in diameter with a 2-mm thickness, and 14.5 mm in diameter with a 3-mm thickness. This discreet RFID tag is designed for application on small, non-metal surfaces via an adhesive backing. HT028 is available in black in HF with the ICODE SLIX chip. In addition, it can be customised with a logo using pad or laser printing, while numbering is applied using laser technology.

HT032 is a ‘mould tag’, a special RFID tag that is embedded into the product via injection moulding during production. It is made of FPC (flexible printed circuit), a printed circuit consisting of a polyamide or polyester film which is extremely light, thin and flexible. Yellow in colour and rectangular in shape, it measures 70 mm x 11 mm x 0.6 mm. Weighing just 0.2 grams, it is designed to be embedded in non-metal objects. HT032 is resistant to very high temperatures. The HIGGS 3 chip operates in UHF (European and US frequencies) and can be read at a distance of up to 9 metres.

HT033 is an RFID hard tag made of PA6+30GF, a polyamide consisting of 30% fibreglass, which makes the nylon more rigid, resistant to compression and dimensionally stable. Rectangular in shape — measuring 52.8 mm x 44 mm x 11 mm and weighing 28 grams — this robust RFID tag is designed to be screwed onto metal objects. Available in grey in UHF (both European and US frequencies) with the UCODE 8 chip, it can be customised with a logo using pad and laser printing, while serial numbering is applied using laser technology. 

HT034 is an RFID hard tag made of a state-of-the-art engineering plastic that is resistant to chemicals and very high temperatures.
Square in shape, this tag measures 26.24 mm x 26.24 mm x 5.40 mm and weighs 6 grams. Its special design makes it ideal for application on metal surfaces in industrial settings exposed to extreme heat, reaching a maximum of 220°C!
Available in dark grey and in UHF — both European and US frequencies — with the HIGGS 3 chip, HT034 can be read up to a distance of 2.5 metres. Customisation with either a logo or numbering can be carried out using laser technology.

HT040 is an RFID hard tag made of polycarbonate, a thermoplastic material with excellent temperature and flame resistance, while also featuring hardness, impact resistance and good dimensional stability.
Rectangular in shape, this small, lightweight tag — measuring 37.7 mm x 13.7 mm x 4.85 mm and weighing 2.2 g — can be applied to all types of surfaces by means of an adhesive or cord. It is designed for IT asset management. Available in both European and US UHF, with the MONZA R6P and MONZA 4QT chips, its reading range extends up to 5 metres.
Black in colour, the customisable part of HT040 is white and can be printed using an RFID thermal transfer printer.

HT058 is an RFID hard tag made of TPV (thermoplastic vulcanisate), an elastomer combining the advantages of thermoplastic materials with those of rubber. It retains good dimensional stability at high temperatures and is resistant to tensile stress and breakage, UV aging, ozone and weather. Rectangular in shape, it measures 83 mm x 26 mm x 2.6 mm and weighs 5 grams. With its flexibility, HT058 perfectly adapts to irregular and curved surfaces, and can be attached to metal and non-metal objects using the holes provided and a Panduit cable tie. This application prevents tampering. Available in yellow, in both European and US UHF with the MONZA 4QT chip, it offers a large reading distance of up to 9 metres. It can be customised with a logo or barcode engraving, which can be applied using pad or laser printing. Numbering is applied using laser technology.

HT059 is a nylon ‘button tag’ — it resembles a button. Small and robust, it is resistant to impacts, chemicals, mould and bacteria.
Round in shape, it is exceptionally small, thin and lightweight, with a 10-mm diameter, 2.6-mm thickness and weight of 0.4 grams!
Designed for application on metal surfaces used in harsh environments, HT059 is either applied via an adhesive backing or embedded inside the item. Also available in black and in HF with the ICODE SLIX chip, it can be customised with application of a logo using pad or laser printing, while numbering can be applied using laser technology.

HT060 is an RFID hard tag made of FR4 (flame resistant), a material made of fibreglass with an epoxy resin matrix, which makes it flame retardant. It has a high electrical resistance and very low degree of moisture absorption.
Round in shape, it is available in two sizes — a 5- or 6-mm diameter, a thickness of 4 mm and a central hole of 2 mm — and is very light, weighing just 0.5 grams. Available in black and yellow, it can be either screwed or glued onto the surface or in the cavities of metal objects. It is produced in European and US UHF, with the HIGGS 3 chip.

HT061 is an RFID hard tag made of FR4 (flame resistant), a material consisting essentially of fibreglass and a flame-retardant epoxy resin. With high electrical resistance, this material absorbs very little moisture. It is also resistant to acids and alkaline substances.
Rectangular in shape, it measures 95 mm x 25 mm x 4 mm and weighs 15 grams. It is designed for application on metal surfaces by means of adhesive backing or screws using the two 4-mm diameter holes on the sides. It is resistant to very low temperatures — down to -60°C — and even very high temperatures reaching 230°C! Black or white in colour, HT061 is available with European and US UHF with the MONZA 4QT chip, and can be customised with a logo using pad or laser printing, while numbering can only be applied using laser technology.

HT063 is an RFID hard tag made of nylon, an industrial plastic resistant to tensile stress, wear and chemicals.
Robust, round in shape, it is 34 mm in diameter and 6 mm thick, with a 5-mm central hole, and weighing 7 grams. Designed to operate in harsh conditions and at very high temperatures — a maximum of +200°C for half an hour — this tag is optimised for metal surfaces, but can also be affixed on non-metal surfaces using an adhesive backing or screws.
It is available in European and US UHF with the MONZA 4QT chip and in HF with the MIFARE 1K CLASSIC EV1 S50 chip. Black in colour, it can be customised with a logo using pad or laser printing, while serial numbering can be applied using laser technology.

HT064 is a nylon RFID hard tag resistant to impacts, tensile stress and chemicals. Rectangular in shape — measuring 52 mm x 23 mm x 5.5 mm and weighing 11 grams — this robust RFID tag guarantees optimised reading performance in metal-dense environments. It is resistant to very high temperatures, with a maximum temperature of +200°C for one hour. HT064 is particularly designed to be read on the back of metal objects, which the tag can be affixed to using adhesive backing or screws, offering an alternative to readings from the front. It is available in yellow in UHF (European and US frequencies) with the MONZA R6P chip, and can be customised with a logo using pad or laser printing. Numbering is applied using laser technology.

HT065 is an RFID hard tag made of ferrite, a ceramic-like material with excellent magnetic and electrical insulation properties. With such features, this material is used in electrical engineering, radio technology and electronics.
Rectangular in shape, HT065 is small and compact, and it is designed for embedding in non-metal objects, thus enhancing their NFC capabilities. It is also designed to withstand extreme conditions, so it is resistant to high temperatures of up to 200°C and low temperatures down to -60°C! Tiny and very light — measuring 4.9 mm x 3 mm x 2.5 mm in just 0.5 grams — it is available in HF with the ICODE SLIX chip and NFC technology.

HT066 is an RFID hard tag made of ferrite, a ceramic-like material with very good magnetic and electrical insulation properties.
Rectangular in shape, HT066 is very small and light — measuring 4 mm x 2 mm x 2 mm and just 0.3 grams — it is designed for embedding in metal objects, thus enhancing their NFC technology. It is also designed to withstand harsh environments, tolerating temperatures up to 200°C and down to -60°C! This hard tag is available in HF with the ICODE SLIX chip and NFC technology.

HT067 is an RFID hard tag made of engineering plastic, whose high performance makes it resistant to mechanical impacts, chemical reagents and both high and low temperatures.
Rectangular in shape, HT067 weighs approximately 19 grams and measures 54 mm x 36 mm x 12.5 mm. Designed for application on dense metal surfaces using an adhesive backing or screws, it is available in European and US UHF with the UCODE 8 chip. Yellow in colour, this tag can be customised using laser technology.

HT068 is an RFID hard tag made of polycarbonate (PC), a thermoplastic material with high resistance to temperature changes and fire, with elevated hardness and stress resistance.
Rectangular in shape, HT068 weighs about 19 grams and measures 54 mm x 36 mm x 12.5 mm. Applicable to non-metal surfaces using an adhesive backing or screws, it is available in European and US UHF with the UCODE 8 chip. Available in blue, it can be customised using a laser printer.

HT069 is an RFID hard tag made of PPS, a thermoplastic polymer with excellent resistance to chemicals, mechanical stress and high temperatures. 
Rectangular in shape, it weighs 8 grams and measures 60.20 mm x 19.15 mm x 5.27 mm. Suitable for application on metal by means of adhesive backing or screws, it features high resistance to heat, withstanding up to 230°C during operation!
Available in European and US UHF with a HIGGS 4 chip, its reading distance reaches 6.5 metres. Black in colour, it can be customised using laser or pad printing, while numbering is applied using laser technology.

HT070 is a waterproof and extremely durable RFID hard tag in high-impact plastic that is resistant to impacts, cuts, high-pressure washing and high temperatures. Rectangular in shape, it weighs 15 grams and is available in two sizes — 97 mm x 27 mm x 15 mm and 97 mm x 27 mm x 10 mm. It allows for omnidirectional reading over long distances. The thinnest one — 10 mm — reaches 5 metres, while the thickest — 15 mm — reaches 8 metres. HT070 is configured for attachment via screws or welding on any material, whether metal or non-metal, such as plastic and wood. It is available in UHF — both European and US — with the MONZA 4QT chip. Produced in blue and grey, it can be customised with an embossed printed logo, while serial numbering can be applied using laser technology.

HT082 is an RFID hard tag made of TPU, thermoplastic polyurethane, a non-toxic polymer featuring elasticity, flexibility, oil and abrasion resistance, as well as being water and gas proof.
With its distinctive funnel shape, HT082 is a tag for animals, thus for non-metal surfaces, comprising a ‘male’ part — 100 mm x 75 mm x 13 mm — and a ‘female’ part — ø 29 mm x 23 mm. These two components are attached to the ears of cattle on breeding farms by means of an interlocking device. In addition, the HT082 weighs 16 grams and covers large reading distances: up to 6 metres when read from a fixed device, and up to 3 metres when using a handheld reader. Available in UHF — both European and US frequencies — with the UCODE 8 chip, it comes in yellow, orange and blue. Finally, numbering can be applied using laser or inkjet technology.

HT083 is a cable tie tag made of PA66, a nylon featuring hardness, rigidity and resistance to wear, heat and abrasion. It measures 198.5 mm x 9 mm x 8 mm and weighs 2 grams. With to its special cable tie shape, it can be firmly anchored to objects for identification purposes. Designed for application on non-metal surfaces, HT083 is available in black in HF with the ICODE SLIX and NTAG213 chips. Printing and serial numbering can be applied using laser technology. 

HT084 is a ‘Seal tag’ — as it is typically used — made of nylon 66 (PA66), a plastic material resistant to impacts, wear and weather. 
With its excellent abrasion resistance, flexibility and compactness, it is therefore ideal where durable, secure and fast application of cable tie tags are required for non-metal surfaces.
It measures 348 mm x 28 mm x 4 mm, weighs 6 grams and is available in three frequencies: LF, HF, UHF. Black or green, it can be customised with a logo using silkscreen printing, while numbering is applied using laser technology.

HT085 is a ‘sleeve tag’ or ‘tag anchored to objects using a cable tie’ made of PA6, an ultrasound-sealed nylon that provides good thermal protection and perfect resistance to impacts, pressure and other mechanical stresses. Rectangular in shape — 27 mm x 20.7 mm x 9.6 mm — and weighing 4.7 grams, this tag can be anchored to metal surfaces by means of plastic or metal cable ties. It is available in LF with the EM4200 chip, in HF with the ICODE SLIX and NTAG216 chips, and in UHF (European and US frequencies) with the HIGGS 3 chip. It is produced in red, yellow, green, blue, black. HT085 can be customised with a logo using silkscreen printing, while serial numbering is applied using laser technology.

HT086 is a hard ceramic tag featuring low electrical conductivity and resistance to high temperatures. Rectangular, small and thin — measuring 10 mm x 5 mm x 3 mm — it is ideal for small spaces and can be glued to the surface of metal objects. HT086 is yellow and available in European and US UHF with the UCODE 8 chip.

HT088 is a tag made of ABS, a material characterized by high resistance to shock and temperature changes. This hard RFID tag is characterized by its Metal pin, thanks to the metal cable and the magnetic lock.
The surface of this reusable tag - you can disassemble it and use it again after first use - measures 60 x 28 x 5 mm, the metal cord is 175 mm long and the magnetic pin has a diameter of 20 mm. Its weight is 9.5 grams.
HT088 is available in the European and US UHF frequency with the Monza R6P chip, in green and white, and is customizable with laser technology.

HT090 is a ‘button tag’ made of nylon, a plastic resistant to impacts, wear and weather that is industrially hardened via overmoulding.
Round in shape, this small, lightweight ‘button tag’ — 12.4 mm by 2 mm and only 0.3 grams! — is designed for tracking small objects or for incorporation using an adhesive backing in confined spaces within items to be identified. Suitable for application on non-metal materials, it is available in LF with the EM4200 chip and comes in black. In addition, it can be customised with logos using pad or laser printing, while numbering is only applied using laser technology.

Icode DNA cards are high-frequency contactless RFID cards operating at 13.56 MHz. They operate in accordance with the ISO 15693 standard, which regulates the operation of vicinity cards designed to read and write over large distances. Indeed, their operating distance reaches 1.5 m. 

Icode DNA cards have a 252-byte user memory, UID and an anti-collision algorithm. They offer high levels of security due to the EAS and AFI functions for anti-theft purposes, and the 128-bit AES data-encryption key. 

These features make them particularly suitable for ski ticketing. 

They are available in different materials — PVC, PETG and wood — in the following sizes: 86 mm x 54 mm x 0.86 mm for PVC and PETG, 86 mm x 54 mm x 1.3 mm for wood.

ICODE SLI-S cards are HF contactless RFID cards operating at 13.56 MHz. They follow the ISO/IEC 15693 protocol and have a high level of security. With a large memory capacity, these cards have a data transfer rate of up to 53 kbit/s and cyclic redundancy checks (CRC) for error detection. Furthermore, their anti-collision function makes it possible to detect other integrated circuits that are also present in the same magnetic field.

The reading distance of ICODE SLI-S cards can reach up to 1.5 m depending on antenna geometry, application, reader and the environment. These cards are excellent for asset management, supply chain projects, and pallet and container tracking.

Finally, ICODE SLI-S cards are available in PVC, PETG with dimensions 86 mm x 54 mm x 0.86 mm and in wood with dimensions 86 mm x 54 mm x 1.3 mm.

ICODE SLIX cards are contactless, high-frequency (HF) RFID cards operating at 13.56 MHz. 

Compliant with ISO standard 15693, they have a cyclic redundancy check (CRC) for error detection and an anti-collision protocol, which is useful for simultaneous operations of several integrated circuits in the same magnetic field.

The read/write distance of ICODE SLIX cards is 1.5 metres, which varies mainly according to the environment, antenna geometry and application. 

ICODE SLIX chip cards are ideal for identification projects, even on an industrial level. They are available in PVC or PETG measuring 86 mm x 54 mm x 0.86 mm, while in wood they measure 86 mm x 54 mm x 1.3 mm.

LB001 is a flexible RFID label made of coated paper. It is rectangular and measures 40 mm x 60 mm. The inlay is 11 mm x 45 mm and is suitable for non-metal surfaces. Printing and serial numbering are applied using offset or inkjet technology, either colour or black and white. The thermographic technique is used when printing in black and white.
LB001 is a white RFID label available in UHF, and is equipped with the HIGGS 9 chip.

LB002 is a flexible and adhesive paper RFID label. Rectangular in shape, it measures 40 mm x 19.5 mm x 0.25 mm and can be applied to non-metal surfaces. Printing and serial numbering are applied using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. LB002 is available in white and in HF, with the ICODE SLIX chip.

LB003 is a flexible and adhesive paper RFID label. Rectangular, it measures 70 mm x 35 mm x 0.23 mm and is applied to non-metal surfaces. It can be customised: printing and serial numbering are applied using the offset or inkjet technique for colour and black-and-white prints, and thermographic printing for black-and-white prints. LB003 is white and available in UHF with the UCODE 7 chip.

LB004 is a flexible and adhesive paper RFID label. Round in shape, it has a diameter of 40 mm, 0.27-mm thickness, and is designed for application on non-metal surfaces. Printing and serial numbering are applied using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. LB004 is white and available in HF with the MIFARE CLASSIC 1K EV1 S50 chip.

LB005 is a flexible and adhesive paper RFID label. With a round shape, it has a 30-mm diameter and is 0.5 mm thick. It is designed for application on non-metal surfaces, and can be customised using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. Available in white and in LF, with the RF81 chip.

LB006 is a flexible RFID label made of PP (polypropylene), a ductile thermoplastic material with a high resistance to impacts and high temperatures. This label can tolerate up to 100°C during operation! 
Rectangular in shape, it measures 110 mm x 38 mm x 0.35 mm and is suitable for application on glass and other non-metal surfaces via an adhesive backing. Printing and numbering are applied using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. LB006 is white and available in UHF, with MONZA 4E and MONZA 4QT chips. The reading distance is large and depends on the reader, environment and application.

LB007 is an RFID label made of PET, a plastic material resistant to cuts, weather and high temperatures. It can tolerate up to 85°C during operation. 
Rectangular in shape, it comes in two sizes: 64 mm x 6 mm x 0.74 mm and 64 mm x 18 mm x 0.74 mm. LB007 can be applied to metal surfaces by means of the special permanent adhesive. It can be customised using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. White in colour, it is available in UHF with the UCODE 8 chip.

LB008 is a flexible and adhesive paper RFID label. Rectangular in shape, it measures 85 mm x 54 mm x 0.43 mm and can be applied to non-metal surfaces. Printing and serial numbering are applied using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. White in colour, it is available in HF with the  MIFARE CLASSIC 1K EV1 S50 chip.

LB009 is a flexible and adhesive paper RFID label. It is rectangular in shape and measures 45 mm x 22 mm x 0.3 mm. It is applied to non-metal materials by means of an adhesive. It can be customised using offset or inkjet technology in colour and black and white, and thermographic printing in black and white. White in colour, LB009 is available in  UHF, with the MONZA R6 chip, and can be read over large distances, which vary depending on the environment, application and reader.

LB010 is an RFID label made of PP (polypropylene) rectangular in shape, which measures 9 x 6 mm.
Applicable by adhesive on glass and non-metallic surfaces, it can be customised by offset or inkjet, in colour and black and white, and by thermography, also in black and white. LB010 operates in the HF frequency with the RF81 chip and is available in white.

LB011 is a flexible and adhesive paper RFID label. Rectangular in shape, it measures 110 mm x 35 mm x 0.25 mm, while the antenna inlay is 100 mm x 12 mm. It is suitable for application on non-metal materials with an adhesive backing. Printing and numbering are carried out using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. White in colour, it operates in the UHF band with the HIGGS 3 chip.

LB012 is an RFID label made of PET, a thermoplastic material featuring flexibility, resistance to cuts, weather and high temperatures. It can tolerate up to 85°C during operation. Rectangular in shape, it is covered with a layer of semi-gloss paper and measures 73 mm x 17.6 mm x 0.3 mm. LB012 is designed for adhesive application on non-metal materials that are hard to label, such as cardboard and plastic. It can be customised using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black-and-white prints. It is white and available in  UHF with the UCODE 8 chip.

LB013 is a flexible and adhesive paper RFID label. Rectangular in shape, it measures 54 mm x 34 mm x 0.2 mm, while the antenna inlay is 50 mm x 30 mm. It is ideal for application on non-metals by means of an adhesive backing. It can be customised using offset or inkjet technology in colour and black and white, and thermographic printing in black and white. White in colour, it is available in UHF with the MONZA R6P chip, with a reading distance that can be adjusted depending on the environment, reader and application.

LB014 is an RFID label made of PET, a flexible, cut- and weather-resistant thermoplastic material. It is rectangular and measures 54 mm x 34 mm x 0.24 mm. LB014 can be applied to non-metal surfaces using a special adhesive. Printing and serial numbering are applied using offset or inkjet technology for colour and black-and-white prints, and thermographic printing for black and white only. White in colour, it is available in UHF with the UCODE 7 chip. The reading distance depends on the environment, reader and application.

LB015 is an RFID label made of PET, a flexible plastic that is resistant to cut and weather. Rectangular in shape, it measures 44 mm x 19 mm x 0.2 mm and can be applied to non-metal surfaces using a special adhesive. Printing and serial numbering can be performed using offset or inkjet technology in colour and black and white, and thermographic printing for black and white only. LB015 is white and available in UHF with the UCODE 8 chip.