Your Configuration
LT012 RFID label
LT012 is a fabric RFID tag. Rectangular in shape, it is applied to the garment to be identified by heat-sealing at 200°C, with a pressure of 2 Kg/cm2 for 30 seconds.
Its dimensions measure 70 x 15 x 1.6 mm and its weight is equivalent to 1.3 grams. Available in white, the customisation of this label is done by thermographic printing technique.
The LT012 was created for industrial laundries and has specific features that make it ideal for all typical operations in this sector.
Its life cycle lasts up to 200 washes, during which it withstands a temperature of 90°C for fifteen minutes. Then, when subjected to drying it tolerates up to 160°C for half an hour and ironing is applicable up to 200°C for 10 seconds. Finally, it withstands up to 185°C for half an hour inside the finishing tunnel and withstands industrial stretching up to 60 Bar, i.e. 600 N/cm2.
The LT012 is available in the catalogue with the UHF chips: MONZA 4QT, UCODE 7, UCODE 8 and UCODE 9. Furthermore, it can be read by a fixed RFID reader up to 5 metres, and by a handheld RFID reader up to a distance of two and a half metres.
| Where to apply | Fabric |
|---|---|
| IP Rating | 68 |
| Material | Textile |
| Dimensions | 70 x 15 x 1.6 mm |
| Weight | 1.3 g |
| Application method | Heat sealer |
| Washing Cycles | 200 |
| Resistance to heat in the short term | Washing: 90°C, 15 minutes Drying: 160°C, 30 minutes Ironing: 200°C, 10 seconds Finishing Tunnel: 185°C, 30 minutes Industrial Extractor: 60 Bar (600 N/cm2) |
| Colours | White |
| Temperature | Storage -40°C ∼ +80°C |
| Type of printing / type of numbering | Termography |
The LT012 has an IP68 rating, making it resistant to water and dust.
Due to the specificities described above, this RFID tag is easily applied to clothing or linen, typically handled in industrial laundries and in the fashion industry.
